If you need to elevate your Starlink dish, a number of mounting options are available to help. Whether you want to put your dish on your roof, on the side of your house, or even in the middle of a field, here are the accessories that let you do it.
The Starlink Long Wall Mount is a great option for mounting your dish to an exterior wall or fascia board. In this tutorial, I am going to show you the process of installing the Long Wall Mount.
Since Starlink requires a clear view of the sky in order to connect with the satellite network, many customers use a permanent mount above ground level. Additional mounts and accessories are available on the Starlink Shop once you have placed your order.
The optimal placement of the Starlink dish is somewhere near the peak of your roof, which is likely to be the highest mounting location available to you. The more trees and objects you have around your house, the higher the dish will need to be mounted.
The Starlink receiver dish must be facing south.
So before you decide to purchase this service, use the Starlink App to see if the receiver dish will have a clear line of sight to the southern sky.
What Direction Should Starlink Dish Face? Mostly up. While the exact direction that a Starlink satellite dish should face will depend on where you are located, it will most likely need to be pointing somewhere between 15 and 35 degrees from being pointed straight up and angled to the north.
Starlink required field of view of the sky /siting your Starlink. Starlink requires a 100 degree cone unobstructed view of the sky. This figure should improve (i.e. the requirement may well drop to less than 100 degrees) as more satellites are put into orbit.
Ideally, the router should be placed in an open area with as few obstructions as possible, such as walls or furniture. Additionally, the router should be placed away from electronics, such as TVs and microwaves, that may interfere with the signal.
The base that comes with your Starlink kit can be used as a permanent mount if you have a suitable mounting location. For example, a flat roof that is free from obstructions. The base can also be used if you plan to keep your installation temporary and movable.
The Standard Starlink is designed for portable use at any destination where Starlink has active coverage. With an easy setup and break down, Starlink delivers high-speed, low-latency internet access within minutes, and packs up quickly when it's time to move to your next destination.
Installing the Starlink router inside is preferred, but it can be placed outside as long as the environment stays within the specifications given by Starlink. I recommend purchasing a weatherproof enclosure to house the Starlink router.
Do You Need to Drill a Hole to run Starlink cable? The Starlink cable has a large ferrite-like protection. Therefore, you'll need to drill a hole. And if you're running it in through a vent, you might have to drill out a part of the vents for the cable to fit.
Because the Starlink phased array antenna has a wide field of view to track satellites, any trees or other obstructions will cause performance issues. You'll need to find a suitable location by using the Starlink app to check for obstructions.
Moving Starlink service to a new address is a simple process that requires only a few steps. Customers should contact Starlink customer service to begin the process and then contact the local installation team to complete the move. With this new service, customers can now enjoy their Starlink service at a new address.
Starlink is a constellation of thousands of satellites that orbit the planet much closer to Earth, at about 550km, and cover the entire globe. Because Starlink satellites are in a low orbit, latency is significantly lower—around 25 ms vs 600+ ms.
With the correct attachments, you can quickly secure the Starlink dish to your metal roof for improved internet service while preserving the roof's integrity and maintaining its warranty.
Starlink obstruction percentage
Most internet activities will work fine, but you might have issues gaming or doing video calls. Above 5% is where the real issues start. At this level, you will notice more frequent outages that last longer.
Starlink Dish should be placed in an open area or an elevated surface with a clear line of sight to the sky, according to Starlink. Use the Starlink app to check for obstructions in the field of view. The Starlink dish should face northwards in the Northern Hemisphere.
More and more RVers are jumping on the Starlink bandwagon, and many of them are eager for a good, solid Starlink RV mount. Sure, you can leave your Dishy sitting on the ground outside of your rig, but this leaves it susceptible to theft, not to mention the animals that might try to mess with it.
You will not be able to cut or extend the Starlink cable yourself. Should you want to 'plug in' a device to the system with a cable, such as a Laptop, you will need to order the Starlink 'Ethernet Adapter' which can be ordered only from their website.
Starlink has no limit on the number of devices you use, so the only limit is what your hardware can support. The Starlink app says that the Starlink router can support up to 128 devices. Not that you're going to want to connect 128 devices though.
How many devices can Starlink handle at one time? As standard, Starlink can support up to 200 devices but with ClubWiFi's network technology this can be considerably increased to up to 8000 devices securely on a public network.
Starlink satellites are visible from Earth, you just need to know when and where to look. Jump to: Where to see Starlinks and when. Can you spot them when they deobit?
If your Starlink App displays a "Motors Stuck" alert, your Starlink may be mounted in a way that it cannot reach its optimal angle to connect with the satellites. We advise mounting your Starlink within 5 degrees of vertical.
The Standard Starlink cable length is 50 feet, or 15 meters.
cable. You can purchase the 150 ft. extended cable from the Starlink shop. Note: The cables cannot be combined.