For ceramic tile, acetone nail polish remover will be okay. However, stone tiles that have not been sealed, some porcelain tiles, porous soap stone, granite tiles, and marble tiles can experience problems with the use of nail polish remover or nail polish that gets stuck in the cracks.
Use Vinegar
Vinegar is one of the most useful kitchen ingredients you can use to remove hard water stains from bathroom tiles. The all-purpose cleaner is mildly acidic in nature and perfect for removing stains from your bathroom. White vinegar also prevents the growth of germs, mold, and mildew in the bathroom.
If the stain is still visible, use a clean cloth moistened with acetone nail polish remover (or plain acetone), and rub the area and remove the stain. Step 4. In the unlikely event that the stain is still on the surface, moisten a soft cloth with Isopropyl Alcohol and use it to gently scrub the area.
Acetone, the main ingredient in nail polish remover, is a stone-safe organic compound. For the purpose of removing stains on natural stone, however, forget your nail polish remover. Some nail polish removers contain other chemicals, and non-acetone nail polish remover has no acetone whatsoever.
The type of tile matters.
For ceramic tile, acetone nail polish remover will be okay. However, stone tiles that have not been sealed, some porcelain tiles, porous soap stone, granite tiles, and marble tiles can experience problems with the use of nail polish remover or nail polish that gets stuck in the cracks.
Acetone should not be used on 1-part paints or varnish coatings, and it is very important to test or know compatibility on plastics or any other materials (beyond wood, metal, epoxy, and polyester resin). Acetone should never be used on clear windows, lenses, or clear plastics.
Acetone revitalizes stained porcelain and fine china, giving new life to heirloom surfaces. When it comes to raw textiles, acetone is commonly diluted to remove gums, oils, and other undesirable substances from the fibers.
Fortunately, you don't need harsh chemicals or solutions to disinfect porcelain tiles. Warm water and an appropriate non-abrasive cleaner are all you need most of the time.
Make a paste of one part hydrogen peroxide and two parts baking soda. Use a sponge to scrub the stubborn spots with baking soda and peroxide. Let the paste work on the bathtub stains for an hour. Rinse the bathtub with hot water.
A light coat of WD-40 on a cloth can help remove soap scum from bathroom tiles and prevent mould and mildew. It can also be used to clean grout. Whilst WD-40 can be used effectively, we recommend using a dedicated tile cleaner such as LTP Multipurpose spray.
Depending on how severe the dirt and grime build up on your tiles is, you can either dust the tiles over with a coating of baking soda and then scrub this away with a non-abrasive brush or sponge for a quick and easy finish.
Do not use cleaning products that contain acids or ammonia (and other harsh chemicals) as these can damage grout and glazed surfaces of the tile. Choose products that are compatible with your grout to avoid damage or discoloration of the grout. Always dry your porcelain thoroughly after cleaning.
Grab your bucket and fill it up with 1 gallon of hot water then stir in ¼ cup of white vinegar. Vinegar is a tough yet natural cleaning solution that will surely clean up any messes that may be found on your tile. Go on and mop the floor with your vinegar solution.
There are a few ways to restore your porcelain tile after you've come across a stain. You can try tackling the spot with some hydrogen peroxide or by using a steam cleaner. For more difficult stains, consider trying diluted muriatic acid, an industrial-strength solution professionals have been using for decades.
Most adhesive residue can be removed from glass using acetone, found in most nail polish removers. Apply it to the area with a bit of friction, and the residue should rub away easily. If acetone doesn't work, apply a small amount of spray lubricant, which can break down the adhesive's hold on the glass surface.
POWERFUL: Acetone is a strong cleaning solvent; one which cuts through grease, waxes, resins and other residuals that can clog machinery or molds. Acetone breaks down these residuals, making clean-up of machinery and molds quick and simple.
The chemical is very flammable, so you need to avoid using things like paint and nail polish remover near open flames. Breathing in large amounts of acetone can cause health problems like: Nose, throat, eye, and lung irritation.
Acetone is highly flammable, so it should never be used near a flame or heat source. It can irritate the lungs and mucus membranes, so it should always be used with good ventilation, and it can dry or crack your skin, so wear gloves while handling it.
MEK on the other hand has a slower evaporation rate and higher boiling point than acetone, making it a more potent, stronger cleaning agent. ? Water Soluble – Both MEK and Acetone are water soluble, however due to MEK's slower evaporation rate it is able to maintain a constant boil when mixed with water.