To clear a clog in your toilet without a plunger, or if plunging hasn't worked, a toilet snake can help you return to a functioning flush (sigh of relief). To get started, put on a pair of rubber gloves and make sure you've located the water supply in case you need to quickly restrict the water flow.
Plumbing snakes (also called drain cables) that are used to unclog sinks can actually scratch your porcelain toilet bowl. If plunging did not work, you want a toilet auger (also sometimes called a closet auger).
To unclog toilets that couldn't be fixed with a plunger, use a toilet auger. Also called a plumbing snake, this flexible coil of wire is designed to extend into pipes and clear obstructions without damaging the plumbing. Feed the end of the cable into the toilet, taking care not to scratch the bowl.
This can be done easily with a little baking soda and apple cider vinegar. Simply pour the two substances down the drain and let it foam up before flushing the toilet. This will clear out any small clogs forming in your system.
Use Baking Soda and Vinegar
Pour a ½ cup of regular household baking soda into the drain, then add a ½ cup white vinegar. Cover the drain if you can. Let the mixture stand in the drain for several minutes. Next, to remove grease and debris in your pipes, pour five or six cups of boiling water into the drain.
Caustic Soda
Caustic soda is a nasty chemical that can burn, but it's very effective for unclogging toilets. To use this chemical, you need to get some rubber gloves and eye protection. You can pick the chemical from the local hardware or grocery stores.
If you can't unclog the toilet using a plunger or a snake, your next best option is to use boiling water. Boiling water can help to dissolve the clog and free up the pipes. To use this method, bring a pot of water to a boil and pour it into the toilet. Let it sit for a few minutes, and then flush the toilet.
Experts agree: Drano Max Gel is the best overall drain cleaner because it works quickly to get rid of tough clogs.
You can use Drano® Clog Removers to unclog a kitchen sink, bathroom sink, shower or clogged bathtub, but DO NOT use them in toilets. For clogged or slow-running drains, apply the product and let it work 15 minutes, then flush with hot water.
Most plumbers will charge a flat rate for a drain snake, which will likely average between $75 and $500. When it comes to simpler clogs, expect to pay no more than $150, while more extensive blockages that require dismantling the toilet's plumbing could cost between $150 and $500.
Excess waste and toilet paper or non-flushable items can become lodged in the toilet trap after they are flushed. When there is a significant mass stuck in the toilet trap, the toilet keeps clogging as normally flushed material is more likely to catch and clog.
A snake is safer to use on tough clogs than a plunger, which can apply too much pressure on the wax ring at the base of the toilet, causing it to break—and it's also gentler than a liquid dissolving solution, which can corrode your pipes.
A drain snake used with too much force being can scratch a zinc pipe and damage the coating. This can lead to cracks or rusting in the pipes opening the door to a major problem in the future. A drain snake has a coiled wire, which harnesses a lot of energy when being used.
Surprisingly, snaking your main line can potentially make the clog worse. The snake could pack the clog in even tighter, meaning your plumber may have to remove that section of the pipe.
Baking soda and vinegar – put one cup of baking soda into the blocked toilet and wait two minutes. Afterwards, slowly pour two cups of vinegar and wait a few minutes before flushing the toilet. Dish soap and water – put dish soap, then hot water into the toilet.
A partially clogged toilet can sometimes be cleared just by using hot water. The pressure produced by the hot water helps to push material blockages away, while the heat works to dissolve any fat or grease that may also have built up.
Coke and Pepsi are loaded with phosphoric acid, which breaks down the buildup that can clog your drains! Phosphoric acid can even remove lime scale and another tough buildup that regular cleaners struggle with. This is an effective and refreshing home remedy if we ever saw one!
You can use straight or a diluted vinegar cleaning solution for the bathroom to clean bacteria, especially around the toilet. Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight.
Green or brown stains in the toilet usually indicate lime buildup. Lime scale forms as hard water evaporates and leaves a mineral buildup behind. As it dries, it picks up any dirt particles along with it, and slowly the stain builds, layer by layer, on the inside of the toilet bowl.
If there are brown stains, it is probably from iron in your water. If you discover a thick, slimy mess, it is likely from iron bacteria growing in your toilet tank. Iron bacteria is a bacteria that fixes to iron particles in the water.
Hydrochloric acid, also known as muriatic acid, is a strong acid that is commonly used to dissolve clogs in drains. This acid works by breaking down organic materials such as hair, grease, and soap scum that can accumulate in pipes and cause blockages.
A completely clogged drain will require the help of a professional plumber, but baking soda and vinegar might be a quick fix for a partially clogged drain. This solution will dissolve and push the sludge through the pipes to allow water to flow through easily. Let hot water run for a minute to warm up the pipes.