The best way to clean your diamond jewelry and restore its sparkle is to: Spray a soft-bristled toothbrush with Windex and gently brush diamond jewelry thoroughly, removing any dirt on the surface of the diamond or dirt that has settled in and around the metal.
Toothpaste, baking soda, bleach, and other household cleaners are abrasive. While they won't damage your diamond, they can damage your gold. Windex won't hurt your ring, but it isn't a great cleaner either. So stick to mild soap and water, and six-month cleanings and check-ups at your jeweler.
Steps for Cleaning Your Diamond Ring with Windex:
Get a small clean bowl and place your diamond ring inside. Spray Windex on the ring inside the bowl generously and allow it to sit for about one minute. Using a toothbrush, scrub the ring thoroughly, focusing on the surface and around where it is attached to the metal.
Windex and Hydrogen Peroxide Solution.
Soak your diamond ring for about 10–15 minutes. The Windex will remove the day-to-day dirt build up and the hydrogen peroxide will kill any bacteria on the ring. After soaking your engagement ring in the solution, gently scrub your ring with a soft toothbrush to remove residue.
A simple plan to keep your diamond jewelry looking beautiful is to soak it in a gentle degreasing solution, such as water with a few drops of mild dish soap, once or twice a week. After you remove the diamond from the cleaning solution, use a soft, clean toothbrush to remove any remaining dirt.
Diamonds are exceptionally delicate, and thus, they require the utmost care. Harsh chemicals like acetone, chlorine, bleach and other abrasive substances like baking powder and toothpaste will damage your diamond beyond repair.
Use Ammonia
Work is required to keep your diamond shining bright. Diamond jewellery can be cleaned by soaking it in a solution of one cup of warm water and one-fourth cup of ammonia for about 15 minutes.
Dish Detergent & Warm Water
The best homemade jewelry cleaning solution is a mixture of a few drops of Dawn dish detergent in warm, not hot, water. Let the piece sit in the solution for a few minutes, longer if it's very dirty, then gently scrub with a new, baby-size, soft toothbrush.
While vinegar is slightly acidic and needs to be used with caution on more porous stones, it will do a fabulous job on your diamond ring. Simply mix a half cup of white vinegar with 2 tablespoons of baking soda. Stir until the baking soda is totally dissolved, then soak your diamond ring in the solution for 2–3 hours.
Jewelers use ultrasonic cleaners with high frequency sound waves and chemicals, which create bubbles that latch on to the dirt on the diamond. The high frequency sound waves pull the dirt away from the stone and bring them up to the surface.
Although Windex shouldn't harm any hard gemstone, we seriously recommend using this method only for diamonds, and only for platinum, gold, and silver. Windex is an ammonia solution, and harmful to soft gemstones (for example, emeralds and pearls), so using it for anything else is just too big a risk of damage.
If the cloudiness of your diamond is caused by external factors, such as a greasy film or dirt, it's possible to fix it and regain its original sparkle. The way to do so is by simply cleaning the ring using warm water, soap, and ammonia-based cleaners. If you can't do it yourself, take it to a professional cleaner.
"The best way to clean diamond rings is to make a solution with warm water (almost hot) and dishwashing soap. Soak your ring for about 20 to 40 minutes, gently brush the stone with a very soft toothbrush, and then rinse under warm running water," advises Mann. "If needed, repeat."
Despite its ruggedness, diamond can lose its sparkle with oil or dust deposited on it. To maintain the sparkling of this indestructible gemstone is a tough job, but a possible one!
To clean diamonds, professional jewellers will use a specialised device referred to as an Ultrasonic Jewellery Cleansing Bath to get your piece sparkling once again. This device uses vibration and ultrasonic sound waves to lift the dirt and other pollutants off your diamond.
It's a common myth that toothpaste can be used to clean jewelry. However, toothpaste can easily damage your diamond ring and gemstones. Diamond might be hard and strong, but this doesn't mean it has to be cleaned using toothpaste. The chemicals in the flavor used to make toothpaste are corrosive to metals.
Mix 1 teaspoon dishwashing liquid and 1 cup warm water. Add 1/2 teaspoon of ammonia based household cleaner (like a glass cleaner such as Windex) Soak your jewelry in the solution for about 5 minutes & then gently scrub with a soft-toothbrush. Air dry or carefully towel-dry with paper towel or regular cloth.
Refraction and dispersion are the reasons why the light ray travels through the diamond. Diamond acts like a tiny complicated prism through which the light ray travels at different angles and gives a shiny appearance.
A diamond that has not been cleaned for a while can look milky due to a buildup of film and dirt on its facets. Cloudy diamonds can also have diminished transparency from inclusions or other characteristics intrinsic to the crystal from which they are cut.
The way each of a diamond's tiny facets are cut and polished determines how much sparkle the diamond will have, which means the style and quality of cutting and polishing are equally important. More facets create more sparkle, and to achieve maximum sparkle, each facet must be cut and polished properly.
Whenever you're shopping for diamonds, make sure to examine them thoroughly and avoid inclusions such as chips, dark crystals or black dots, diamond feathers, and cavities. Doing this will ensure that the diamond you're buying is of good quality.
Chemicals can damage the metals used to alloy gold for diamond settings, and abrasive cleaning products or cleaning brushes can scratch the gold. Diamond rings and chemicals such as bleach, as well as shampoo and moisturizers, can be a bad combination.
Most dish soaps contain a number of harsh chemicals and dyes that can not only harm the surface of the metals in your diamond rings collection but can dull and scratch the finish of the diamonds themselves.