You will get less mould if you keep your home warm, ventilate properly and minimise the amount of moisture you release into the air.
Condensation occurs mainly during cold weather, whether it is raining or dry. It does not leave a 'tidemark'. It appears on cold surfaces and in places where there is little movement of air. It can often lead to mould forming in corners, on or near windows, in or behind wardrobes and cupboards.
On cold days try to keep indoor temperatures at least 18°C. Try not to use a portable gas heater. They create high levels of humidity and are expensive to run.
Many fungi grow well at temperatures between 60 and 80 degrees Fahrenheit, which are also ideal temperatures for human comfort. In addition, as mentioned above, temperature gradients often produce the moisture needed for mold growth.
As the house cools down the water condenses in areas that begin to get damp, which leads to mould. “The warmer the air the more moisture it can hold, so it's a particular problem in the winter when people start using their central heating.”
It is also very important that there is adequate ventilation in the room. Open a window or door so the mold spores can escape, instead of staying locked in your home.
Can a Dehumidifier Remove Mold? Simply put, dehumidifiers cannot remove mold. The machine is designed to remove moisture in the air. This means that if there is already a presence of mildew in a home or building, it will not be removed just by working to reduce the moisture after the fact.
Hydrogen peroxide kills mold spore on contact by breaking down proteins and DNA. It's normally used to clean mold on porous and non-porous surfaces. Ionized hydrogen peroxide can kill mold spores in the air, but it requires the use of a special fogging machine.
Yes, molds can thrive in high-acid foods like jams, jellies, pickles, fruit, and tomatoes. But these microscopic fungi are easily destroyed by heat processing high-acid foods at a temperature of 212 °F in a boiling water canner for the recommended length of time.
In fact not heating your house through the winter or colder months can cause real issues for buildings, especially if it has been heated previously, flooded or has a lack of ventilation or has damp problems. When the temperature drops, cold air outdoors, can increase the problems with condensation in the home.
Airtight windows and buildings require more active ventilation. your kitchen and bathroom has an extractor fan. This will help prevent moisture reaching other rooms, especially bedrooms, which are often colder and more likely to get condensation. Do not block air-brick vents or ventilators.
Extreme temperatures do not kill mold, but they can deactivate them. Even when temperatures drop below freezing, mold spores don't die; they simply become dormant and will begin to multiply and grow again as soon as the temperature rises.
The risk of mold growth in your home increases in summer months due to several factors like warmer temperatures and summer rains.
Leave the light on for several hours. The heat from the bulb helps keep the closet and the clothing dry. Empty, clean, and dry closets thoroughly on occasion. Doing so ensures you keep them fresh and aired out, reducing the possibility of mold growth.
To Prevent Mold Growth in Your Home. Keep humidity levels in your home as low as you can—no higher than 50%–all day long. An air conditioner or dehumidifier will help you keep the level low. You can buy a meter to check your home's humidity at a home improvement store.
Ward off mold with tea tree oil, cinnamon, clove oil, or thyme oil. Each option will kill mold and prevent spores from coming back. Combine a teaspoon of the oil of your preference with a cup of water in a spray bottle. After spraying, allow one hour for the solution to dry, then wipe away with a clean towel.
Put 3% concentration hydrogen peroxide in a spray bottle. Spray the moldy surface and let it sit for 10 minutes. Scrub down the surface and rinse off the hydrogen peroxide. Spray a solution of borax or white vinegar to prevent it from coming back.
Ventilate your home with fresh outdoor air
Open doors between rooms to allow for this free-flowing movement. This will allow fresh air to circulate and push out any mold spores or other particles which have accumulated inside your home.
If you're hoping to reduce mold, mildew and moisture, a dehumidifier is your best choice. However, if allergy control and air quality are top priorities, a convenient air purifier is undoubtedly the way to go.
Many people ask – does a dehumidifier kill mold? The answer is no, dehumidifiers don't have the capacity to kill mold. Mold grows by reproducing spores into the air. Those spores land on surfaces and if there's moisture, food, and space, the mold spores will grow.
Air purifiers help capture mold spores from the air, preventing them from reproducing and spreading throughout your home. While air purifiers won't help treat active mold that's already present on surfaces, they are a great way to control the spread of airborne mold particles.
So, if you are sleeping in a damp or mouldy room, you're spending about a third of your time inhaling dangerous mycotoxins spores. Frequently inhaling these spores leads to a plethora of health problems for both healthy and vulnerable people.
Indoor mold growth can and should be prevented or controlled by controlling moisture indoors. If there is mold growth in your home, you must clean up the mold and fix the water problem. If you clean up the mold, but don't fix the water problem, then, most likely, the mold problem will come back.