Another common misconception is that an acid will remove a sealer. Most common acids (such as muriatic, hydrochloric and phosphoric) will have no effect on cured acrylics, polyurethanes or epoxies.
A solvent like xylene is effective at removing acrylic from concrete. It dissolves (“softens”) the acrylic and allows for removal. However, solvents such as xylene have a harsh smell, are flammable, dangerous for your skin, and shouldn't be used around children, pets and plants.
The acid etching process will remove the old concrete sealer completely from the concrete slab. In its place will stand a fresh slab of concrete ready for a new application of concrete sealer. Once the concrete has been acid etched, you need to let the slab dry completely before applying the new sealer.
For some reason, this idea that vinegar will remove concrete sealer has become one of the more pervasive myths about concrete, and it is just that: a myth. That's because almost all concrete sealants are made to be resistant to acid, which vinegar is. As if that wasn't enough, vinegar can actually damage concrete.
A simple floor stripper or paint and epoxy remover is something you can use to remove asphalt sealer. A caveat, though: you can only use paint and epoxy remover on concrete, metal, wood, and masonry. Do not use this on vehicles and walls as the product could strip the clear coat or paint off.
Soda blasting, a less aggressive mechanical method, has become more widely used in recent years to remove sealers and coatings successfully. Soda blasting utilizes special high-pressure blasting equipment with commercial-grade baking soda granules as the blasting medium.
If only the top surface was impacted and the sealer has been applied within the past 1-2 days, then using Acetone with a rag or scrub brush should open the sealer enough to let the moisture escape. After it's dry, you may need to apply a small amount of concrete sealer and smooth it out.
Choose a low-traffic area (i.e. a corner) and pour a quarter-sized drop of Xylene onto a sealed paver. Wait about 15 seconds, wipe off the Xylene, and touch the area. If it feels tacky, it means a solvent-based sealer was used. If it's not tacky, a water-based sealer was used.
Epoxy and urethane systems last between 5-10 years, closer to 5 if the surface experiences heavy traffic. Reactive penetrating sealers are the longest lasting concrete sealers, wearing away only if the substrate surface itself wears away.
As a gentler cleaner, bleach can't harm concrete's durable material. Aside from being an effective cleaner and stain remover, it also acts as a disinfectant to the concrete surface.
The removal of old concrete sealer can be done in one of two ways: mechanical or chemical. The mechanical way involves using some kind of tool to physically grind, sand, or blast away the sealer.
There are a few ways to remove sealer from pavers with a steam cleaner. You can try using a degreaser or citrus-based cleaner to help break down the sealant. Be sure to test the cleaner on an inconspicuous area of the paver first to make sure it doesn't discolor or damage the surface.
Hydrochloric Acid is used for etching concrete where grinding is not an option or cannot be carried out to prepare the floor for a new coating. Acid etching will remove most of the weak, milky layer of cement dust, lime and sand fines that can rise to the surface with over-wet concrete, poor curing or over-trowelling.
If enough is applied, the xylene should melt the sealer through to the surface of the concrete before it evaporates. In conclusion, applying xylene is a great, inexpensive way to rejuvenate dull or whitened sealer. However, be cautious when using it.
Etching – Vinegar's ability to dissolve CaCO3 will dull your marble, travertine, concrete and terrazzo surfaces. It may “clean” the surface but it is also dissolving pits into the finish and effectively dulling it.
Only proven one-time, permanent penetrating concrete sealant
Keeps water out of concrete, and your concrete lasts forever.
Will Vinegar Damage Concrete? Cleaning concrete with vinegar will not damage it! However, saturating concrete for an extended period will damage the cement that binds concrete together. Over time, vinegar erodes the concrete itself, so be careful.
Glycolic acid for concrete and masonry cleaners
Glycolic acid is preferred in concrete cleaners and removers as it combines the essential cleaning attributes, required acidity, and necessary metal complexing capability for concrete cleaners and cement dissolving formulations.
Among the easiest and most affordable are vinegar, alcohol, and WD-40. If you need something stronger, you can use industrial-grade isopropyl alcohol, and we recommend contacting a professional. Once you have the silicone solvent option of your choice, apply the softening agent thoroughly to all areas of the silicone.
WD-40® is very good at removing silicone sealant, but make sure you completely remove it from the surface before applying any new silicone sealant, as they can react.
Heavy coats of sealer, or a buildup of sealer applied numerous times over the years, will cause moisture to become entrapped under the sealer and, in time, the sealer loses adhesion from the concrete.
If you need to get rid of rust from concrete, your best bet is to use some WD-40 Multi-Use Product, and some elbow grease. WD-40 is specially formulated to be a penetrant, so when you spray it on a rusted surface, it gets to work right away by getting under the rust.