Olive oil can also work as a WD-40 replacement for metal or plastic areas that need loosening. Plus, its light scent makes it a good choice for applications that might be sensitive to odor. Like vegetable oil, wherever it's applied may call it to become a dust magnet, as well as being sticky.
Olive oil also works as a great lubricant and protectant for metal, which means you can use it on hinges, gardening tools, and kitchen knives. Be sure to remove rust and grime before applying the olive oil, to ensure the surface is as clean as possible.
#5 Homemade WD40 Substitute
While there are a couple of different recipes to choose from, the most effective one comprises 90% vegetable oil and 10% acetone. As both of these products are organic and biodegradable, you can use them without causing any harm to the environment.
Cooking oil
Whether it's olive, canola, or vegetable oil, its uses can extend past the kitchen as a cheap WD-40 alternative. The greasy texture of cooking oil makes it a great lubricant, and it's a good multipurpose oil, too.
WD 40 lubricating spray may have some low-cost, do-it-yourself competition: vegetable oil and acetone. A mixture of vegetable oil with 10 percent acetone, the active ingredient in nail polish remover and some paint thinners, works as well to free rusted bolts as WD 40.
If you don't have WD-40 at the ready or you want a more natural solution, then by all means, give your coconut oil a go.
A white lubricant, lithium grease is considered an all-purpose lubrication solution. It can be used to lubricate in applications involving metal-on-metal, or even metal-on-plastic. It effectively helps reduce unwanted friction and encourages components to move far more smoothly.
Olive Oil. Olive oil is a simple solution for fixing squeaking hinges. A few drops of olive oil will easily lubricate your squeaking hinges.
Loosen a lock in a pinch
If you are in a rush and need to remedy a sticky lock, the most convenient way is with olive oil from your pantry. In order to fix the lock using the olive oil, simply rub a small amount of the oil on your key and insert it in the lock.
We recommend using products that do not contain silicone. You can even use household oils such as olive or coconut oil to care for your rain boots.
Hydrogen Peroxide. Hydrogen peroxide can dissolve rust. Applying hydrogen peroxide to the fasteners and letting the sit is also an effective method to remove rust and loosen nuts and bolts. Scouring them with a hard brush will help you get rid of all the rust left on the nuts and bolts.
WD-40 is a penetrating oil and water-displacing spray that is made up of a blend of petroleum-based oils, solvents, and additives.
The spray isn't actually a lubricant. The WD stands for “water displacement” and it's made to push water away so you can clean metal that's been exposed to moisture. Water displacing penetrating oils (such as WD-40) will soften plastic, nylon or rubber components, which is especially bad if you have nylon rollers.
Vaseline: you can use vaseline for all sorts of applications. It is a great lubricant for metal parts such as the air installation, but it is also regularly used for installing PVC parts. Note: contrary to ball bearer grease, vaseline does become liquid at higher temperatures (40 - 60°C), causing it to drip.
As a result, the efficacy and performance of vegetable oils allow them to be used as lubricants [21]. Compared with mineral-based lubricants, vegetable oils generally have several advantages, such as high flash points, high viscosity indices, higher lubricities, low evaporative losses, and good metal adherence.
In the worst cases, the oxygen bond in vegetable oils can lead to metal oxidation and weaken the structure of the metal. In this paper, the performance of vegetable oils as a lubricant was tested using a fourball tribometer under extreme pressure conditions, which conforms to ASTM D2783.
Pidilite ZORRIK-88 to Protects Metal from Rust, Corrosion and Removes Oil, Dirt, Grease Grime 311 g (400 ml) Confused between WD40 and Zorrik 88? Well, both comes from the house of Pidilite. Zorrik 88 is the Indian version of WD 40.
50–60% naphtha (petroleum), hydrotreated heavy. <25% petroleum base oils. <10% naphtha (petroleum), hydrodesulfurized heavy (contains: 1,2,4-trimethyl benzene, 1,3,5-trimethyl benzene, xylene, mixed isomers) 2–4% carbon dioxide.
Baby oil is just mineral oil. Also known as, petroleum jelly (the one marketed for babies from that big company says 100% pure).
Scientifically, water displacement is basically just displacing or moving fluid from a space. That is why WD-40 ® is so effective for cleaning or around the home. Not only does it prevent rust since it displaces moisture, but it can also displace dust, dirt, grease, grim, and almost anything.
WD-40 actually stands for Water Displacement, 40th formula. Chemist Norm Larsen who developed WD-40 wanted to create a formula to prevent corrosion and perfected his creation after 40 tries. That's why using WD-40 on wood stops it from splintering and metal from corroding.