Installing the Starlink router inside is preferred, but it can be placed outside as long as the environment stays within the specifications given by Starlink.
Ideally, the router should be placed in an open area with as few obstructions as possible, such as walls or furniture. Additionally, the router should be placed away from electronics, such as TVs and microwaves, that may interfere with the signal.
Weather resistant
Designed and rigorously tested to handle a wide range of temperatures and weather conditions, Starlink is proven to withstand extreme cold and heat, hail, sleet, heavy rain, and gale force winds – and it can even melt snow.
You might be tempted to leave an indoor router or satellite unit in a covered area outside or a weatherproof enclosure. This may work in the short term, but the risk factors are high. The device could overheat or freeze.
The router is designed to receive signals from the Starlink satellites, which orbit at an altitude of around 340 miles. This means that the router has a range of up to around 600 miles in all directions, depending on the location of the user.
How far can the Starlink dish be from house? The Starlink dish can be up to 150 feet from the house if you purchase the 150 ft extension cable from Starlink.
Perhaps a hangover from the days when routers were particularly clunky, some people opt to hide theirs in a cupboard or behind a sofa. A good rule of thumb is to always have your router visible, as placing it in an obscured area will dampen its effectiveness and have a negative impact on your connection.
Your modem's location doesn't matter as much as your router. A modem usually hangs out near your main network jack. Most people keep their modem and router near each other for convenience, but that doesn't have to be the case.
Can I move my router to another room? Yes, you can! However, with a device that handles wireless networking, placement is key. If you put your router in a bad spot, you could have terrible speeds on all your wireless devices.
The Standard Starlink is designed for portable use at any destination where Starlink has active coverage. With an easy setup and break down, Starlink delivers high-speed, low-latency internet access within minutes, and packs up quickly when it's time to move to your next destination.
You will not be able to cut or extend the Starlink cable yourself. Should you want to 'plug in' a device to the system with a cable, such as a Laptop, you will need to order the Starlink 'Ethernet Adapter' which can be ordered only from their website.
Starlink recommends that you leave ample distance between the Router and the Mesh Node for the best results. Place them about 1 - 2 rooms apart. Exceeding this limit could affect the signal strength. Place them too close, and you could compromise the effective area covered by the Access Points.
If you need to elevate your Starlink dish, a number of mounting options are available to help. Whether you want to put your dish on your roof, on the side of your house, or even in the middle of a field, here are the accessories that let you do it.
Starlink Dish should be placed in an open area or an elevated surface with a clear line of sight to the sky, according to Starlink. Use the Starlink app to check for obstructions in the field of view. The Starlink dish should face northwards in the Northern Hemisphere.
We recommend using powerline adapters if your router is too far from your box. These help carry your broadband signal over long distances using your household electrical circuit. Want to know more about powerline adapters?
Routers set to a 2.4Ghz frequency that are correctly placed should offer you coverage for 150 feet indoors and about 300 feet outdoors. This is the coverage for a one-level home without lots of obstructions.
Here's a “rule of thumb” to go by: your average wireless router has a range of 150 feet (46 meters) indoors and 300 feet (92 meters) outdoors.
Can't I just put it in the attic? In general, the answer is no. It may seem like it makes sense to put your router somewhere in the attic that's more centrally located, but there are several issues with that.
Routers send out wireless signals—but physical obstructions can still create problems. Even the ground itself can absorb a good amount of your signal. That's why the best practice is to place your router a few feet off the ground, such as on a cabinet, desk or wall mount.
You'll also want to be careful not to stick your router behind a large TV, which can cause electronic interference while also physically blocking or disrupting the signal. Along with electronics, keep an eye out for bulky furniture that might be limiting the signal's reach.
Moving Starlink service to a new address is a simple process that requires only a few steps. Customers should contact Starlink customer service to begin the process and then contact the local installation team to complete the move. With this new service, customers can now enjoy their Starlink service at a new address.