Did you know that toothpaste makes an effective tile grout cleaner? To remove dirt and grime from tile grout: Dab some white, non-gel toothpaste onto the grout. Scrub with a toothbrush.
Before I begin, it's worth flagging that you need plain white, non-gel toothpaste if you want to try this hack — anything with a bright color could end up staining the grout. Gel toothpaste should also be avoided because these often contain dyes which can be transferred.
If your stains are a bit more stubborn, try these other grout cleaning solutions: Scrub the grout with toothpaste. Choose whitening toothpaste for a little extra polish. Again, here's your excuse to get a new electric toothbrush because this job would be much easier with your old one!
Option 1: Use a brush and warm water
Most hardware stores sell specific tile and grout brushes, but if you have an old toothbrush, that can work just as well. Add some warm water and elbow grease and this is often enough to get the grout clean. Scrub the grout thoroughly, keeping the area and the brush very wet.
Mix 3.5 cups hot water, 3 tbsp of lemon juice, 1/2 cup Baking Soda, and 1/6 cup white vinegar. Using a spray bottle, apply the mixture along the grout itself, making sure it's totally saturated. Let it soak in. After about one hour, spray the grout one more time and then mop it all away!
Combine warm water and powdered oxygen bleach in a spray bottle or bowl. This non-toxic, fabric-safe cleaner removes grease and food stains with minimal scrubbing. Stir the mixture until the oxygen bleach dissolves. Spray or pour the solution onto the grout until it floods the grout lines.
Mix hydrogen peroxide and baking soda in a bowl to form a thick paste. Spread the paste onto your grout using an old toothbrush to completely coat the area to be cleaned. Let it soak in for about 5 to 10 minutes. Like the previous method, use a brush with firm bristles to scrub the grout.
Baking soda and dishwashing liquid
Allow to sit for 5 minutes, then scrub away with a grout brush. Wipe away the dirt with a sponge. You could also use our soft scrub cleaner which contains similar ingredients and has amazing results!
Grout and tiles can be tricky to clean, but dishwasher tablets can make the job easier. If your grout and tiles are looking a little grimy, try using a dishwasher tablet to clean them. Wet the tiles and grout, then rub a tablet over them until it dissolves.
Probably the most effective way to clean your grout is steam cleaning. Hot steam can get into the small crevices and pores of grout to loosen dirt, grime and grease more effectively than any type of chemical cleaner or brush.
Acidic Cleaners
Cleaners that have a high chemical pH or are acidic will begin to eat away at your grout and make it more fragile and porous. Stay away from cleaners that contain vinegar and citrus. This will eat away at the top layer of the grout and cause the need for replacing grout lines sooner.
What do professionals use to clean grout? Whether you believe it or not, most professionals use a solution of white vinegar and water with a 1:1 ratio. This solution is often more effective than dedicated Ph-neutral grout cleaners.
What's the best homemade grout and tile cleaner? Mix together 1/2 cup of baking soda, 1/4 cup of hydrogen peroxide, and 1 tsp dish soap. Apply cleaning mixture onto the grout, wait 5-10 minutes, scrub, sweep up the excess baking soda, and rinse.
First, wash your tiles and grout with sugar soap using a toothbrush and scrubbing brush. We used Selley's Sugar Soap concentrate for this, mixed with warm water in a bucket – it works a treat. Use your toothbrush, scrubbing brush and some elbow grease to scrub the grout and give it a good going-over.
If your grout is in need of whitening, you can even just spray hydrogen peroxide alone on the area and let it sit for 15 minutes before scrubbing. To yield the cleanest results, form a paste out of the the baking soda, hydrogen peroxide, and dish soap.
Grout that hasn't been sealed, needs to be resealed, or is in poor shape should not be cleaned with vinegar. The vinegar penetrates into the pores of the grout, further weakening the material. Over time, vinegar will deteriorate the condition of the grout by etching or wearing it away.
So, how do you clean grout with vinegar and baking soda? Apparently, vinegar is a popular natural household cleaner, but it's too acidic for cleaning grout. In fact, the acetic acid in vinegar can corrode the grout over time, so you might want to avoid using it for cleaning in this case.
Cleaning Dirty, Stained Grout
Fill a spray bottle with a 50-50 mix of vinegar and warm water, spray the stained grout, then scrub with a stiff brush. Rinse.
Simply spray some WD-40 Multi-use Product straight onto the grout using the smart straw for extra precision and wipe it off with a sponge. Then wipe of the excess product and ensure surface is dry. If you're worried about how it will make your bathroom smell, you can always use the low-odour variety.