When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
Pour a half-cup of hydrogen peroxide into the toilet and let it sit for 30 minutes. Use your toilet brush to scrub the stains. Add a sprinkle of baking soda and scrub again if the stains persist. Turn on the water and flush away stains and germs.
A quick once-over with a cloth sprayed with WD-40 is great for removing soap scum from shower doors and can also prevent mildew from returning. It's also a great way to clean the grout between your bathroom tiles, remove stubborn stains from your toilet bowl, and rust stains on porcelain caused from aerosol cans.
You probably didn't know you could use WD-40 for bathroom cleaning, but because it's a lubricant that's not as harsh as most chemicals you use in the bathroom, it's great for getting rid of hard water stains and other stubborn stains without harming your surfaces.
Our top pick for the best toilet bowl cleaner is the Lysol Hydrogen Peroxide Toilet Bowl Cleaner, as it's a strong, effective formula that easily tackles soap scum, grease, limescale, and more.
If you're dealing with extreme toilet stains, you can make a paste from Borax and vinegar and apply it directly to those stubborn rings. Mix a 1/2 cup Borax and a few tablespoons of vinegar to create a paste. Apply your paste directly to stains. Let it sit for 20 minutes to break down the stickiest gunk.
Removing oily stains, such as tar, shoe polish, bike grease, crayon and lipstick, from clothes can be a nightmare. Place the stained area on an old, clean towel or a wad of paper towels then spray with WD-40. Wait a few minutes then dab gently with a clean cloth or paper towels.
Solution 3: Using WD-40 to remove limescale
Spray a coat of WD-40 over the affected area. Let it soak for 4-5 minutes, and scrub away for a minute or so. Wipe clean with a cloth. Yes, it's that simple.
Spray WD-40 on tough limescale stains and mineral deposits in your toilet and let it sit for a few minutes. Scrub with a toilet brush and the stains will dissolve easily. If you have any household or gardening tools then WD-40 is a definite MUST!
Hydrogen peroxide, the active component of oxygen bleach, gives baking soda an added punch to clear any yellow stains. For antique or colored porcelain, hydrogen peroxide and oxygen bleach are the most effective household cleaners for tough stains.
Sprinkle baking soda or Borax directly on the hard water stain in your sink, then spray on the same vinegar and water solution you used on the bathtub. Let the cleaners sit for 15 minutes, then scrub with a soft brush or sponge. (Remember to wear gloves when cleaning with Borax.)
(Formerly called CLR Bath & Kitchen)
Use on most bathroom surfaces including: porcelain, ceramic tile, shower doors, sinks, bathtubs, white grout and caulk, toilet bowls, and fiberglass. Will not remove rust.
The contaminants notorious for causing brown stains in toilet bowls are iron, manganese and sulfur. These pollutants can also produce iron bacteria, manganese bacteria and sulfur bacteria, which also can produce brown stains.
Combine 2 parts borax with 1 part lemon juice to form a paste. Smear the paste onto any remaining stains in the bowl, such as the ring formed around the waterline. Borax cleans while lemon juice whitens. Leave the paste to soak for two hours to lighten stains and whiten the bowl.
Another popular method to remove limescale from your toilet is to use vinegar and baking soda. Pour about one cup of white vinegar into the toilet bowl, followed by about one cup of baking soda, then let it rest for around 10 minutes.
WD-40 is a petroleum-based lubricant that can cause stains on clothes. But it also can help to remove stains. The solvents in WD-40 help to break down oil—especially old oily stains—loosening the oil molecules from fabric fibers. Simply spray the stain with a bit of WD-40 from the front and back of the fabric.
When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
But one thing for sure, it will evaporate, and leave behind a sticky residue that is designed to give short term rust and corrosion protection.
For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging. If your toilet remains clogged or continues to get clogged, this may be an indication of plumbing problems such as mineral buildup or pressure issues.
Over time your toilet water can cause an unsightly rainbow of stains and mineral build up in your toilet bowl. CLR® Calcium, Lime & Rust Remover helps you flush the filth away.
So instead of purchasing those expensive fizzies or abrasive toilet bowl cleaners, head to the fridge and let the carbonation of Coke work its magic on filthy rings, lime buildup, and water stains. Because Coca-Cola contains carbonic, citric, and phosphoric acids, it's great for tough stains and dissolving rust.