On your iOS device, go to Settings menu, then tap on Accessibility > Audio/Visual. Adjust the slider to redistribute the sound balance between the left and right AirPod.
One of the most likely causes of one AirPod earbud being louder than the other is the balance control being off-center, as covered in this article above. You can adjust the balance in the Settings app of your iPhone under Accessibility > Audio/Visual > Balance and move the slider back into the middle.
Check the stereo balance in accessibility
Ensure that this slider is in the middle. If it's too far to the right or left, audio will play predominantly out of that AirPod instead of out of both sides evenly. Once this is done place your AirPods back in your ears and check to see if the problem has been fixed.
The simplest and most likely explanation for one AirPod not working is its battery is dead. AirPods can drain batteries at different rates, so even if you've charged your AirPods at the same time, one might run out of juice first. Check AirPods battery life or look at your battery widget and charge if you need to.
Sometimes, one of your AirPods or AirPods Pro may fail to charge properly because they are not in contact with the charging plate at the base of your charging case. This happens when you might not have inserted them fully or correctly into the charging case. Luckily, simply reinserting your AirPod may solve this issue.
With multiple charges in your case, you get up to 30 hours of listening time,7 or up to 20 hours of talk time. Your AirPods (3rd generation) can get up to 6 hours of listening time (up to 5 hours with Spatial Audio enabled)9 or up to 4 hours of talk time on a single charge.
The best ways to clean AirPods and other earbuds
If you use any liquids to clean your earbuds, dry them completely before use. For the microphone and speaker meshes, use a dry cotton swab and a soft-bristled brush to gently wipe away dirt. Don't press too hard, since you don't want to push the wax through the mesh.
If your AirPods are low on battery power, the volume may decrease. Give your AirPods a full charge to see if that improves the issue. You can check the volume by placing your AirPods inside the charging case and opening its lid near your iPhone or iPad.
Like many other earbuds, AirPods can also experience issues over time – such as not being as loud as when you first got them.
Here are four things you can do when experiencing audio malfunctions in one earbud or headphone speaker: Reset your headphones or earbuds. Check for a halfway point issue. Check for low battery in one earbud.
If there's no sound in one AirPod
Check the charge status on your iPhone or iPad to make sure that each AirPod is charging . Put both AirPods in your ears. Play audio to test both AirPods. If an AirPod still isn't working, reset your AirPods or contact Apple Support.
Re-pair the earbuds.
Try unpairing the earbuds entirely and re-pairing them. Some earbuds may have a fail-safe hard reset mode if you still can't get them paired, Cramer says, so check the manual to see what it recommends in this scenario.
Yes! My airpods took my iPhone 7plus down 25% in just 1 hour. I had to purchase a battery case just to make it through the day. On my $30 Bluetooth headphones battery life didn't change so I was surprised this new W1 chip drains power.
You can replace a single AirPod (left or right AirPod) or a Charging Case for a fee. Apple Authorized Service Providers can set their own fees, so ask them for an estimate.
Using a 70 percent isopropyl alcohol wipe, 75 percent ethyl alcohol wipe, or Clorox Disinfecting Wipes, you may gently wipe the exterior surfaces of your AirPods, AirPods Pro, AirPods Max, or EarPods. Don't use on the speaker mesh of your AirPods, AirPods Pro, and EarPods.
Go to Settings > Bluetooth, then tap the Info button next to the name of your AirPods. Scroll down to the About section to find the firmware version. To use your Mac to check that your AirPods are up to date, make sure that you have the latest version of macOS.
To conclude, there is no possible way to charge AirPods without its case. These AirPods are designed to charge only when kept inside their case but not through a wall adapter or USB port directly.
Cleaning the Debris in Charging Case & AirPods. Anything that interferes with the charging mode of AirPods case has something to do with this red exclamation mark error on the AirPods.
Blinking orange or amber
The status light flashes amber on your AirPods, indicating that the AirPods are experiencing a pairing error. This could be caused by several issues, like an incorrect pairing between your AirPods and the Device you're attempting to use them with, outdated firmware, or low battery levels.
If you have AirPods Pro (2nd generation), you can find the precise location of each of your AirPods and the charging case. Open the Find My app on an iPhone or iPad that you previously paired with your AirPods. Tap Devices, tap the name of your AirPods, then tap Find.
Restart Your Device. If you encounter an earbud not working issue, such as Skullcandy left earbud not working, you can try restarting your device to solve this issue. However, if you are using Bluetooth wireless earbuds, you not only need to try restarting your device but also your Bluetooth wireless earbuds.