If hills, trees, buildings, or other geographic features are in between the broadcast towers and the antenna, the signals might not be able to reach your antenna. Elevating the antenna, either by placing it in a higher location or using a taller mast, will increase the signal reception.
Higher is always better. Mount the antenna on your roof or in the attic for optimal performance. These locations are more likely to experience fewer obstacles which cause signal interference between the antenna and broadcast towers. Face the front of the antenna toward the broadcast towers.
Wrapping aluminum foil around an antenna increases the antenna's conductivity and surface area. It will then boost the signal received by a television. That works perfectly. Because most antenna wires are thin, this method works.
The larger the surface area of the antenna, the more channels it's likely to receive. Because outdoor antennas are up high, they are more likely to get long-distance signals. Outdoor antennas receive broadcasts with less interference, as well.
Nearly all Smart TVs, whether made by LG, Samsung or Vizio, work with indoor or outdoor TV antennas. Take a look behind your television, and find the port to plug in a TV antenna. A technician might have once used it to plug a cable box into your TV.
You don't need a special TV antenna with a smart television. In truth, the kind of antenna you should consider works perfectly with your distance from the local broadcast towers. So, if you live over 40 miles from the broadcast tower, it's best to use an outdoor TV antenna in your attic or roof.
This is often a result of either the TV box being powered off, not being properly connected to the TV, or the TV being set to the wrong input. In some cases, if you are not receiving a signal on your TV, it could be a result of a service outage.
According to our research, antenna channels may be lost for various reasons. The reasons include a faulty antenna, lack of digital conversion, coaxial cable signal loss, signal interference, LED light bulbs, TV settings, a faulty TV video card, electric pumps, and thermostat-controlled chlorinators.
Aiming An Outdoor/Attic Antenna
If your omnidirectional antenna has VHF-attracting poles sticking out at the sides, like the one shown below, just make sure at least one is pointed toward the direction of the towers in your area.
The antenna needs to be placed in the same position as the TV transmitter. Because most of the TV transmitter are horizontal polarized it would be best to start putting the antenna in a horizontal position.
To confirm the weak signal, you can check your configuration settings and at the signal strength information panel. You can also get a signal message on the screen. In some TVs, the signal strength is shown in percentages. A lower percentage typically implies a weak signal.
Your TV picture freezing or breaking up can be caused by a variety of different things. Digital TV Antenna, This might be because you have an older style analogue antenna or there could be local interference caused by external factors such as; tall buildings, hills and valleys, trees and 4G / LTE.
While indoor antennas can pick up channels from broadcast stations within a 20-30 mile radius, the reach of an outdoor antenna is about 60 to 80 miles.
Raise Your Antenna
If possible, place your indoor TV antenna in an attic or a second-story location, preferably by a window. Sometimes objects in the room or roofing materials will interfere with the signals, so it pays to try a few different attic locations.
A: You may have seen “line of sight” mentioned many times when it comes to antennas. This simply means that in an ideal scenario, there is a direct, straight line between your TV antenna and the broadcast towers it is receiving signals from.
Trees. Trees can also block OTA TV reception, especially in the spring/summer when increased foliage and wind can cause the breakup of Over-the-Air TV video.