Make a paste by mixing 1/2 cup of Borax and enough vinegar to form a thick paste. Spread the paste immediately onto the hard water stains in the toilet so they are completely covered by the paste. The Borax will harden quickly so don't add the vinegar until you are ready to apply the paste.
Natalie Hunt suggested: “Use baking soda and mix into a paste unit white vinegar and leave it on the toilet seat for a while. You'll notice the yellow stains disappear.” Pat Murphy agreed: “I wiped a paste of baking soda and white vinegar on mine and left it fairly wet and it disappeared, worked wonderfully.”
How do you clean a badly stained toilet? White vinegar is a good remedy to clean stubborn toilet stains. Pour a 120ml bottle of white vinegar into the toilet bowl and put down the lid. Don't use or flush the toilet for eight or so hours, then use a toilet brush to scrub.
Vinegar is a natural acid that can dissolve calcium deposits. You can pour vinegar into the toilet bowl and let it sit for a few hours before scrubbing with a toilet brush.
For a more heavy-duty approach, you can pour an entire bottle of white vinegar over and around the bowl, remembering to cover all of it. Then, leave the vinegar to work for a few hours or overnight. Use your toilet brush to scrub any leftover limescale deposits away the next day.
The get rid of the stains, the majority of cleaning enthusiasts suggested using a 90p cleaning spray, many will be familiar with – Elbow Grease All Purpose Degreaser. Rachel Marsh said: “Do not use bleach on toilet seats, bleach turns it yellow.
Nikki Clews said: “Never use bleach on your toilet seats or anywhere on your toilets as it doesn't remove the stains, it nearly masks it and can damage your toilet.” Kim Mcgeown wrote: “I used bleach on my porcelain toilet and it has completely destroyed it.
You can clean toilet stains with a toilet brush, baking soda, and white vinegar. Household cleaning ingredients like Borax or a wet pumice stone can also scrub away tough mineral stains. If a light cleaning can't break through stubborn toilet bowl stains, you're probably dealing with mineral stains.
Vinegar will not damage your toilet in any way if it's left in your toilet overnight. Regardless of your toilet's material, the vinegar is not strong enough to damage the toilet or the toilet's plumbing. So, you can leave the vinegar in your toilets overnight without worry.
A spray consisting of equal parts vinegar, baking soda and water is an excellent multipurpose cleaner. Sprinkle a cup of borax and a quarter-cup of vinegar into your toilet bowl, let it sit overnight, then scrub and flush in the morning.
The most commonly recommended natural and non-toxic way to clean a toilet is with vinegar and baking soda. Simply poor two cups of vinegar into a toilet bowl, and pour one cup of baking soda. When the solution stops fizzing, spread it over the bowl with a toilet cleaner brush. Leave for 10-15 minutes and rinse.
If the clog still seems to be intact, start over at step 1 and repeat the process a couple of times. For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging.
Yes. You should try and avoid using bleach in the toilet when possible, and opting instead to apply a non-chemical cleaner such as soapy water for cleaning purposes. In doing so, you'll avoid causing potential damage to the glazing on the porcelain surface of the toilet.
Cleaning your toilet with chlorine bleach on a weekly basis limits how much damage this chemical can do to the intricate parts in your loo, namely to the rubber seals. Such damage would be costly to repair.
Urine staining
Urine staining is incredibly common and is the cause that most people will automatically think of when attempting to tackle a toilet seat that is stained yellow. Over time, odd little splashes and drops will build up, resulting in a nasty residue that will then stain if left unchecked.
Use Coke specifically when you need to remove problem stains like limescale or rust. If you want to avoid the risk of tinting your toilet with Coke, a light-colored carbonated soft drink such as 7UP or tonic water will also suffice.
While it can be put to a number of helpful uses around the home, WD 40 is particularly good at softening rust and limescale deposits in the toilet (and bathroom). All you have to do is spray it on the desired section of the toilet, wait a few minutes, then scrub it away with a toilet brush.
Spray a generous coat of WD-40® Smart Straw®, all over the limescale areas such as the shower wall, faucet, glass, or kitchen sink. 2. Let the solution sit and soak for 4-5 minutes before scrubbing it all away.