GENERAL CLEANING: Squeeze gently, directing bowl cleaner under rim and on sides of bowl, inside only. Brush clean and flush toilet. Rinse brush with clean water.
Sprinkle baking soda liberally onto the toilet bowl stains. Use your toilet brush to scrub the stains and create a paste all over the inside of the bowl. Let the mixture sit for 10 minutes to work on the stain and whiten the porcelain.
Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight. The next day, scrub and flush. What's good for those caked-on pots and pans after cooking dinner is also good for removing a brown stain on the bottom of the toilet bowl.
Simply measure out half a cup's worth of bleach and pour it into your toilet bowl, using your toilet brush to scrub it into the bowl and beneath the bowl's rim, also allowing five minutes to pass before you flush it all away.
Mix a solution of equal parts water and vinegar in a spray bottle. Spray the exterior of the bowl, lid and seat with the solution for a more natural, non-chemical clean. Then wipe all the parts clean with a paper towel or clean rag. Vinegar is a non-toxic product effective in killing most mold, bacteria and germs.
Baking soda and vinegar, when mixed together, can form a chemical reaction that looks sort of like an eruption. This chemical reaction can help clear your toilet and any pipe clogs that you might have.
Remove Stains from Glazed Porcelain Tiles
You can use a commercial product safe for glazed porcelain tiles or use white vinegar. Use a warm-water wash with vinegar at half strength to remove the stain completely. Mop the area and allow it to sit for ten minutes, and then rinse with a clean warm water bath.
You can clean toilet stains with a toilet brush, baking soda, and white vinegar. Household cleaning ingredients like Borax or a wet pumice stone can also scrub away tough mineral stains.
Over time, porcelain toilets can develop stains. It may be tempting to use bleach, hydrogen peroxide, and the like, but it's best to avoid these cleaning agents as much as possible. It's not likely that the chemical compounds above will crack your porcelain toilet, but they can damage the finish of the porcelain.
Green or brown stains in the toilet usually indicate lime buildup. Lime scale forms as hard water evaporates and leaves a mineral buildup behind. As it dries, it picks up any dirt particles along with it, and slowly the stain builds, layer by layer, on the inside of the toilet bowl.
When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
The carbonic acid that is in coke is what helps to clean toilet stains. Picture the acidity slowly working its way through the stains, melting them away. It can take a while depending on how stubborn the stain is which is why it's vital to have a suitable cleaning method depending on how bad the toilet condition is.
Do not use cleaning products that contain acids or ammonia (and other harsh chemicals) as these can damage grout and glazed surfaces of the tile. Choose products that are compatible with your grout to avoid damage or discoloration of the grout. Always dry your porcelain thoroughly after cleaning.
Option 1: Use Vinegar and Baking Soda
Vinegar and baking soda produce that oh-so-familiar chemical reaction that powers through buildup and loosens tough stains. While it might seem like it's chewing its way through grime, it's not powerful enough to damage the porcelain finish of the toilet bowl.
Add 1/2 cup vinegar to the toilet bowl, let stand a few minutes, brush, and flush. If you have hard water, let the vinegar sit for an hour, and you may have to do some light scrubbing. To remove stains, add 1/2 cup borax to the water, swish it around, and let it soak overnight.
For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging. If your toilet remains clogged or continues to get clogged, this may be an indication of plumbing problems such as mineral buildup or pressure issues.
You can use straight or a diluted vinegar cleaning solution for the bathroom to clean bacteria, especially around the toilet. Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight.
There are a few ways to restore your porcelain tile after you've come across a stain. You can try tackling the spot with some hydrogen peroxide or by using a steam cleaner. For more difficult stains, consider trying diluted muriatic acid, an industrial-strength solution professionals have been using for decades.
Step 1: Wet your microfiber cloth or sponge with hot water and a few squirts of dish soap. Step 2: Wipe down the sink and apply a lil' elbow grease to any spots that are extra dirty. Step 3: Rinse away the soap and grime, et voila! Your sink is sparkling clean and ready to be used again.
To safely and inexpensively clean your toilet bowls, pour a generous glug of vinegar, followed by a heavy sprinkling of baking soda, into the bowl. While the mixture is bubbling up, scrub the bowl (get under the rim, too). Let it soak for 30 minutes and flush. That's it.
First, make "flush" a family rule. Also, make a simple routine part of your weekly cleaning: Sprinkle the toilet with cup of baking soda. Let it sit for 30 minutes, then spray or squirt with vinegar (a mild acid) to moisten. Scrub with a bowl brush and flush away [source: Niagara County].