Next, shake your can of WD-40 well and spray it directly onto the toilet bowl's stains. Let the lubricant sit for a minute (or five) and afterward, using a circular motion, scrub the stains away with a toilet brush. You may need to repeat this step a few times to remove the stains completely, particularly older stains.
When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
While it can be put to a number of helpful uses around the home, WD 40 is particularly good at softening rust and limescale deposits in the toilet (and bathroom). All you have to do is spray it on the desired section of the toilet, wait a few minutes, then scrub it away with a toilet brush.
Pour a half-cup of hydrogen peroxide into the toilet and let it sit for 30 minutes. Use your toilet brush to scrub the stains. Add a sprinkle of baking soda and scrub again if the stains persist. Turn on the water and flush away stains and germs.
A quick once-over with a cloth sprayed with WD-40 is great for removing soap scum from shower doors and can also prevent mildew from returning. It's also a great way to clean the grout between your bathroom tiles, remove stubborn stains from your toilet bowl, and rust stains on porcelain caused from aerosol cans.
Put a cup of hydrogen peroxide in a spray bottle. Spray evenly over the porcelain. Let the hydrogen peroxide sit for 15 minutes to an hour. Rinse and buff with a microfiber cloth for a clean, bright shine.
Citric acid
More importantly, it's probably even more effective than vinegar for getting rid of that brown stain in the toilet. Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight. The next day, scrub and flush.
How do you clean a badly stained toilet? White vinegar is a good remedy to clean stubborn toilet stains. Pour a 120ml bottle of white vinegar into the toilet bowl and put down the lid. Don't use or flush the toilet for eight or so hours, then use a toilet brush to scrub.
You can clean toilet stains with a toilet brush, baking soda, and white vinegar. Household cleaning ingredients like Borax or a wet pumice stone can also scrub away tough mineral stains.
For a more heavy-duty approach, you can pour an entire bottle of white vinegar over and around the bowl, remembering to cover all of it. Then, leave the vinegar to work for a few hours or overnight. Use your toilet brush to scrub any leftover limescale deposits away the next day.
For this cleaning task, the more, the merrier, pour vinegar (about 1 litre) and a few cups of bicarb will work fine. Give the solution a mix until you have a paste. Then, add it to the toilet bowl and leave it to soak for as long as possible, at least an hour.
To remove tough stains, add the baking soda and vinegar mix to your toilet and then allow the solution to sit in the bowl for up to 30 minutes. During that time, the chemical reaction between the sodium bicarbonate and vinegar will work to eat away at those stubborn hard water stains.
Most people reach for bleach to obliterate toilet germs and stains. However, Green living expert Mark Lallanilla says that plain old white vinegar is an effective cleaner. To eliminate hard water stains, soak toilet paper in vinegar and place directly on top of the stain. Let the vinegar-soaked paper sit overnight.
If you get brown stains in your toilet bowl, the good news is that it's not caused by anything that you, ahem, do in the bathroom. It's actually due to high concentrations of minerals in hard water, like calcium, iron, and manganese, that build up inside the toilet bowl over time, according to Hunker.
Coke - contains phosphoric acid which can not only remove rust, but also limescale.
The best way to clean toilet stains from tough mineral buildup is with lemon juice or any source of citric acid. Spray on the lemon juice and leave it overnight. Then spay on another light layer and wait a few minutes before scrubbing your toilet. Flush to rinse away the stain.
Do not use cleaning products that contain acids or ammonia (and other harsh chemicals) as these can damage grout and glazed surfaces of the tile. Choose products that are compatible with your grout to avoid damage or discoloration of the grout. Always dry your porcelain thoroughly after cleaning.
Use on most bathroom surfaces including: porcelain, ceramic tile, shower doors, sinks, bathtubs, white grout and caulk, toilet bowls, and fiberglass. Will not remove rust. Do not use on vinyl, natural stones, mirrors, plastic laminates, wood, fabrics, painted, coated or sealed surfaces, colored grout or wall coverings.
That's right: water alone is enough to clean lightly soiled porcelain and ceramic tile surfaces. No harsh chemicals are necessary! If you choose to use a mop for your flooring, be sure you have swept up debris beforehand and use a flat mop rather than a sponge mop to keep from pushing dirty water into the grout lines.
WD-40 is hygroscopic and will attract moisture to the firearm which will result in rust. Drive chains of any type - Because WD-40 isn't a lubricant, it really will not work well on drive chains of any type. Gears of any type - WD-40 doesn't have enough lubrication affect to be useful on any type of gearing.
WD-40 can be used on just about everything. It is safe for metal, rubber, wood and plastic. WD-40 can be applied to painted metal surfaces without harming the paint. Polycarbonate and clear polystyrene plastic are among the few surfaces on which to avoid using a petroleum-based product like WD-40.