Citric acid More importantly, it's probably even more effective than vinegar for getting rid of that brown stain in the toilet. Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight. The next day, scrub and flush.
Pumice Stone
You can get rid of a toilet ring in a few different ways. You can use a toilet brush and cleaner to scrub the ring away. You can also use a pumice stone to scrape the ring off. If you have a stubborn toilet ring, you may need to use a toilet cleaner that contains bleach or other harsh chemicals.
The staining comes from hard water, which contains a high concentration of minerals mainly iron, manganese, or limescale compounds.
Pour a half-cup of hydrogen peroxide into the toilet and let it sit for 30 minutes. Use your toilet brush to scrub the stains. Add a sprinkle of baking soda and scrub again if the stains persist. Turn on the water and flush away stains and germs.
The contaminants notorious for causing brown stains in toilet bowls are iron, manganese and sulfur. These pollutants can also produce iron bacteria, manganese bacteria and sulfur bacteria, which also can produce brown stains.
When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
The carbonic acid that is in coke is what helps to clean toilet stains. Picture the acidity slowly working its way through the stains, melting them away. It can take a while depending on how stubborn the stain is which is why it's vital to have a suitable cleaning method depending on how bad the toilet condition is.
Well, if you've just spotted a toilet ring, you can use baking soda and vinegar to remove the ring in an almost effortless manner. Baking soda, also known as sodium bicarbonate, is a great cleaning agent for many household surfaces, and when combined with vinegar, the duo's cleansing power is doubled!
Brown stains are the result of hard water and not your cleaning wrongly. Don't use bleach as it will only bleach out the stain, but not remove it. Use a clean brush with plastic bristles. Remove all the water from the toilet bowl so it wouldn't dilute your cleaning solution.
Let the vinegar and soda solution sit for up to 30 minutes. If there are any stains above the water line, it would be helpful to go over them with your toilet brush one or two more times. One final scrub before you flush should remove any still stuck stains. Flush to rinse.
Baking soda is an effective, natural, and non-abrasive cleanser that can safely remove the rings in your toilet. Simply open a box of baking soda, and sprinkle a generous amount around the bowl of your toilet. Wait 1 hour (or longer).
Vinegar will not damage your toilet in any way if it's left in your toilet overnight. Regardless of your toilet's material, the vinegar is not strong enough to damage the toilet or the toilet's plumbing. So, you can leave the vinegar in your toilets overnight without worry.
Leaving bleach in a toilet overnight is fine, but you shouldn't leave it any longer, or else it might corrode your toilet.
First, make "flush" a family rule. Also, make a simple routine part of your weekly cleaning: Sprinkle the toilet with cup of baking soda. Let it sit for 30 minutes, then spray or squirt with vinegar (a mild acid) to moisten. Scrub with a bowl brush and flush away [source: Niagara County].
Steel wool scrub
Since steel wool is such an abrasive product, you can either use it alone or in addition to borax + vinegar +/or baking soda for better results. 0000-grade steel wool is recommended as it's less likely to scratch up the inside of a porcelain toilet.
While bleach is a highly corrosive chemical that could cause severe damage to your toilet, but it depends largely on how you use it. Using bleach in the toilet bowl is usually safe, especially if your toilet is porcelain.
Use your instincts; if it looks like one cup is going to cause too much fizz, use less or pour more slowly. Allow the fizz to sit for at least 20 minutes. See if it worked. Once the clog is broken up, the water level should go down.
"The biggest don't when it comes to toilet tanks is bleach—do not use bleach or products containing bleach inside the tank, as it can corrode the internal parts of your toilet. If you are aiming to remove tough stains from the tank, I also recommend white vinegar diluted with water."
Don't leave CLR for longer than two minutes.
Safe for various applications and surfaces… (tubs, showerheads toilets, sinks, porcelain, glass, cement, stucco, brick, stainless steel, and much more)!