Hydrogen peroxide kills mold effectively on materials such as clothing, floors, bathroom fixtures, walls and items such as kitchen appliances. Pour 3% concentration hydrogen peroxide into a spray bottle. Spray the moldy surface completely to saturate the area with hydrogen peroxide.
The key to mould prevention is keeping air moisture to a minimum. Dry any condensation that may be gathering on your walls, ceiling to windowsills. Dehumidifiers can also help to remove moisture from the air. Try to keep your bathroom and kitchen door shut tightly and ensure your windows are open whilst cooking.
To clean mould and mildew and kill their spores you will need white distilled vinegar – the cheapest brand from the supermarket will do just fine. Mix 1 part of vinegar with 1 part water and pour into a spray bottle.
To safely and effectively clean a small area of mold, ServiceMaster advises the following: Add full-strength white distilled vinegar to a spray bottle and spray it on the mold. Let it sit for at least an hour before wiping away mold.
Yes, ammonia is a strong mold killer. In fact, many commercial mold cleaning products contain ammonia. It's stronger than vinegar and is similar to bleach in terms of potency, although make sure to never mix two together — ammonia and bleach react to produce toxic fumes.
To clean mold, use regular white distilled vinegar, typically sold with 5% acidity. You can also use “cleaning vinegar” with 6% acidity. Both are effective at killing mold.
To effectively clean and remove mould, use regular white distilled vinegar at 5% acidity or cleaning vinegar at 6% acidity.
Vinegar isn't effective at killing mold from porous surfaces. Carpet and fabric are considered porous surfaces, so you'll likely need to call in a professional or replace them in order to get rid of the mold.
It is also very important that there is adequate ventilation in the room. Open a window or door so the mold spores can escape, instead of staying locked in your home.
Mix one part bleach to four parts water. Wipe and gently scrub the mould until it is gone. Finish by wiping away the bleach mixture and dry the area well with a soft cloth.
Condensation is the most common cause of mould on walls. To prevent mould growth, the dwelling should be properly ventilated and adequately heated. By exchanging damp air inside houses with fresh air from outside, moisture is less likely to condense on cold surfaces like walls.
Use a bleach solution of no more than 1 cup (8 ounces) household laundry bleach per 1 gallon of water to kill mold on surfaces.
Using White Distilled Vinegar to Kill Mold
White vinegar is most commonly found with 5% acidity and works best undiluted, so don't worry about mixing it with water first.
To Prevent Mold Growth in Your Home. Keep humidity levels in your home as low as you can—no higher than 50%–all day long. An air conditioner or dehumidifier will help you keep the level low. You can buy a meter to check your home's humidity at a home improvement store.
Methylated Spirits is the all round hero cleaner for your bathroom, especially for mould. To effectively kill mould, make your own methylated spirits cleaning solution with 80% parts methylated Spirits and 20% part water. Use a sprayer to spray the patches of mould.
Mildew refers to certain kinds of mold or fungus. The term mildew is often used generically to refer to mold growth, usually with a flat growth habit. Molds include all species of microscopic fungi that grow in the form of multicellular filaments, called hyphae.
When airborne mold spores are present in large numbers, they can cause skin irritation, allergic reactions, asthma episodes, infections and other respiratory problems for people. Exposure to high spore levels can cause the development of an allergy to the mold.
Besides killing mold, baking soda also deodorizes, so it can also get rid of the smell mold leaves in your home. Baking soda also absorbs moisture to help keep mold away. Vinegar is sometimes used along with baking soda when cleaning up a mold problem since vinegar kills different species of mold than baking soda.
A bleach solution also works to kill mold. Mix one cup of bleach in a gallon of water, apply to the surface and don't rinse. Mix a 50/50 solution of ammonia and water. Spray on the surface, wait two to three hours, then rinse.
So the answer to the titular question is vinegar. Vinegar is better for cleaning. But that's because bleach isn't intended for cleaning, but for disinfecting. And, by the way, if you want to use bleach for disinfecting, make sure the area you want to treat is clean (and rinsed clean, if you used vinegar!)
For really tough black mold removal, mix two parts baking soda with one part white vinegar and one part water. Stir the mixture until it becomes a thick paste. Spread your mixture liberally onto the surface and let it dry. Scrub away the black mold and stains, and wipe down with water.
Preventing Mold from Returning
Once the surface is clean, you can spray it with vinegar and leave the vinegar on the surface to keep the mold from returning. Keep a spray bottle of vinegar in your shower and spray the surface every few days. Mop your floors with vinegar to prevent mold growth in damp areas.
Cleaning Walls
Mix together ½ cup of vinegar and 2 cups of warm water. Put the solution into a spray bottle, and apply a light layer onto the wall (don't oversaturate it). Let the solution soak in for a few minutes, then wipe it off with a soft sponge.