Pour a cup of baking soda in your toilet and leave it to absorb. About 15 minutes is enough. Now scrub the stains away with a brush. If you really want to get rid of urine scale, make a mixture of baking soda and cleaning vinegar.
Add 1-2 cups of white vinegar to the bowl and leave it in the toilet for 20-30 minutes. After this, gently scrub the walls of the toilet with the brush or sponge and rinse the white vinegar and baking soda away with water. This cleaning method should take care of your stains.
Calcium build-up – Ordinarily, yellow stains are limescale formations. They are caused by hard water – it's rich in minerals, which accumulate over time and become visible inside the toilet bowl. Eventually, these minerals can even accumulate in your pipes, causing a toilet block.
Pour a half-cup of hydrogen peroxide into the toilet and let it sit for 30 minutes. Use your toilet brush to scrub the stains. Add a sprinkle of baking soda and scrub again if the stains persist. Turn on the water and flush away stains and germs.
When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
Citric acid
More importantly, it's probably even more effective than vinegar for getting rid of that brown stain in the toilet. Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight. The next day, scrub and flush.
To clean calcium buildup out of your toilet, use vinegar or another acidic cleaner. The acid will break down the mineral deposits so you can brush them away. Be sure to take the necessary safety precautions when working with cleaners. Wear gloves and eyewear and open windows for ventilation.
Try this: Swish a cup of vinegar around in the toilet bowl using a toilet brush, then add a cup of baking soda, followed by an additional cup of vinegar. Let the fizzing solution sit for 10 minutes. Use a toilet brush to scrub stains. Let mixture sit for a few more minutes and then flush.
“Like when removing limescale from a toilet bowl, only using bleach does just half a job – the stains will become invisible, but the route of the problem will still be there, causing stains to return quickly while becoming deeper-set in the surface of the seat.”
Does CLR get rid of hard water stains? Yes, for stubborn hard water stains on shower walls and tiles, bathtubs, sinks or faucets that need more scrubbing power, you may have to use something stronger than vinegar, like CLR Brilliant Bath Cleaner, a top-tested product that won a 2020 Good Housekeeping Cleaning Award.
Apply vinegar or lemon juice directly onto a cloth and scrub the limescale until it comes away. Alternatively, mix one part lemon juice or vinegar to four parts water. Put the solution in a spray bottle and spritz it onto tiles and plugholes. Leave this to soak for up to an hour for stubborn scale deposits.
Urine scale and limescale leave visible deposits in the toilet. Whereas limescale is a mineral, urine scale contains several mineral salts. The waste in urine contains phosphorus, potassium, sodium, calcium and magnesium. These substances produce brown or yellow stains in the toilet bowl.
You can clean toilet stains with a toilet brush, baking soda, and white vinegar. Household cleaning ingredients like Borax or a wet pumice stone can also scrub away tough mineral stains.
The stains that you see at the bottom of a toilet are usually limescale, or calcium carbonate to use the scientific name. Limescale arrives as a result of water travelling through specific rocks, such as chalk and limestone, on the way to reservoirs and then to our water filtration systems.
3. Don't leave CLR for longer than two minutes. Again, CLR is acidic, which makes it effective, but also means it can cause damage if left in contact with surfaces for too long. Always rinse away with cool water after two minutes of contact.
Bleach + vinegar
Bleach smells quite pungent by itself. But the smell grows even more acrid once you add vinegar because the combination releases chlorine and chloramine vapors, which can cause a chemical burn.
CLR Septic System Treatment is safe on pipes and porcelain and works on fats, oils, grease and other stubborn organic matter.
The most effective way to clean your toilet is by using Borax, which is a multi-purpose cleaning product that effectively cleans hard water stains in the toilet and other plumbing fixtures. Paired with vinegar and other common cleaning products, you'll have sparkling toilets in no time.
For simple cleaning, you can use your toilet brush and distilled white vinegar. Let about ½ cup of vinegar sit in your toilet for a few minutes. Then scrub with your toilet brush. You can also clean the rim with vinegar.
CLR or Lime Away? An acid-based cleaner is the best way to remove water deposits. Vinegar and lemon juice are two natural alternatives, but they just don't work as quickly and effectively. CLR uses similar ingredients to Lime Away.