The ideal height for a shower head, whether it's fixed onto the wall or is a rain shower, is 2000mm which allows plenty of space for people who are very tall – while still providing adequate water concentration for people who might be shorter.
While standard shower heads are typically placed around 80” high, they can range from 68 to 86” for people ranging from 5' to 6'6” tall. Of course, there is no standard shower head height code, so when it comes down to it, you can place your shower head wherever it feels best to you.
The standard height for wall mounted basin mixers and a shower mixer is 1050mmH. Bathroom bench height is at a standard 875-900mmH.
Positioning shower heads toward tiled walls or your fixed panels will help to minimize leakage. Shower heads should never be positioned opposite a door or other opening. Exceptions may be made for smaller or low-flow shower heads or shower heads that point straight down at the floor.
The minimum bathroom size building regulations Australia measures 140cm x 95cm in a rectangular floor plan and 120cm x 120cm on a square floor plan. This only includes a toilet and a basin, and it has different allowances per state. An average bathroom size Australia includes a toilet, vanity, cabinetry, and shower.
Shower floors must be totally waterproofed and shower walls must be waterproofed up to a height of 1,800 mm. Bathroom walls must be waterproofed up to a height of 150 mm.
Shower and Bathtub Code and Spacing Practices
Shower sizes: Shower maximum sizes are not mandated. In fact, the entire bathroom can be a shower. But minimum sizes are regulated. Shower floor minimum size is usually mandated to be at least 30 inches square; that is, 30 inches by 30 inches.
Whether you're taller than the average person or on the shorter side, a shower head at 80 inches should still work for you properly. Consider 80 inches to be the default setting for how high your shower head should be, although you can certainly deviate from that if you desire.
Shower heads should be installed at 80" (203.2 cm) from the floor of the shower pan or bathtub. This height can be adjusted for special cases, but it has proven to be a comfortable industry standard for the typical person and for those that are slightly taller.
Shower heads and body sprays should be located so the water spray is directed toward tile walls or the fixed panels of shower doors. This will help keep water inside the shower, and away from the door. You should never install shower heads aimed in the direction of the door.
What is the ideal shower mixer height? Most shower mixers, taps or valves are installed 75cm to 100cm above floor level.
You will need to establish the minimum requirements for space around your bathroom: Allow at least 600mm in front of the toilet and approximately 200mm either side of the bowl for elbowroom. 700mm should be allowed between the front of the basin and the nearest wall or object.
Code Requirement: A minimum distance of 15 inches is required from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle.
According to Dimensions, the standard height for a shower head is 80 inches above the shower floor. If setting the shower head that high is not an option, you can position it lower; 72 inches above the shower floor is the minimum installation height recommended for shower heads.
While there is no set rule for the distance a showerhead should be away from the wall, you need to consider a comfortable standing position and the diameter of your shower head to determine the most appropriate clearance.
I typically put my shower head at 80" and my bath spout at 20". On a tub shower the valve is at 32" and on a shower I put it at 48".
The tallest person using your shower should have at least a foot of clearance (accounting for at minimum a 3-inch shower arm and a head that's a few inches tall so that the "rain" has some distance to actually fall).
The minimum ceiling height for bathrooms and toilet rooms is 6 feet, 8 inches (2032mm). There are exceptions, including a sloping ceiling over the toilet if the minimum ceiling height of 6 feet, 8 inches (2032mm) is maintained over the front clearance area. Source, 2018 IRC, 305.1.
Leave a space at least 6-12" between the top of the shower enclosure and the ceiling on at least one side for ventilation.
The solution is very simple, a swivel ball adapter. It simply attaches between your shower arm pipe and shower head and increases the adjustability of your shower head. It actually will lower your shower head height about an inch, but it will give you much more flexibility with positioning your shower head.
Do different shower heads affect water pressure? Yes, depending on which shower head you choose, they can increase the water pressure at the head itself in order to create a more powerful shower or decrease it to create a more gentle shower.
The average walk-in shower in the U.S. measures 60" x 30", though size options can vary widely, typically up to 60" x 42" for a rectangular shower and 42" x 42" for a square one. For smaller bathrooms, most experts recommend a shower enclosure no smaller than 36" x 36".
While the maximum size of a shower is not mandated, bathroom code dictates that your shower floor has a minimum size of 30 square inches.
Standard Shower Dimensions
What is this? The standard enclosure shower sizes are 36 inches wide and 60-inches long. However, there are about a dozen “standard shower sizes” in the US alone. But showers bigger than 48-inches wide or 60-inches long are rare.