Similar to water heaters for your home, bidet seats heat water in a few different ways: via a tank type heater, a tankless on-demand heater, or a hybrid of the two. Each types provide the user with a warm water wash, but which one is better for you?
Modern electronic bidet seats are equipped with built-in water heaters. The ability for the bidet seat to heat the water is a major benefit since most people prefer warm water to wash themselves.
They simply connect to the shut-off valve next to your toilet and provide ample water pressure to clean you thoroughly. The most basic of these non-electric bidets provide a single nozzle for rear washing. Pressure is controlled by a turn-dial control knob.
If your bidet's water or seat is not warming properly, there may be a few potential causes. First, check to see if the temperature is set to low and adjust accordingly. If the temperature is set appropriately, make sure the seat is not in power save mode. If it is, switch the seat to function mode.
All electronic bidet seats have warm water and heated seats. The bidet's remote control allows you to adjust the temperature for maximum comfort. Warm water relaxes the muscles and will clean you so thoroughly you'll feel like you've just taken a shower.
Luckily, modern bidet seats have a built-in water heater so you can set your water temperature to a comfortable setting. These settings range between room temperature and about 104 degrees Fahrenheit. And if you happen to be a cold shower fan, you can also choose to turn off the water heater.
There is very little difference in the actual results between cold water and warm water attachable bidet toilet seats. What really matters when it comes to these bidet toilet seats is the water pressure, at least as far as the effectiveness of the cleaning is concerned.
Use a bidet after you poop, but before you wipe.
This is because the water pressure will adequately clean your bottom without the need for toilet paper. Some people like to wipe with toilet paper after using a bidet, but it's a matter of personal preference.
Electric bidet seats comes with built-in water heater and Natural water bidet don't require hot water connection. Therefore, this type of issue only applies to the non-electric models with warm water supply.
This is a self-cleaning feature that gives the nozzles on your bidet a sanitary rinse at the touch of a button. That way, you can have confidence that the water in your bidet is completely safe and clean to wash with. Yes, in fact, bidets are sanitary.
A basic bidet attachment is a good example of a bidet that is typically mechanically powered without the use of electricity, even the kind that has temperature control. However, bidets with more features typically do require electricity.
No, bidets don't spray poop everywhere when you use them. Bidets use a concentrated stream of water specifically directed to cleanse your backside and genitals. The waste does not get sprayed all over. Think of it as a safe, spotless wash for your butt.
Electrical Requirements For A Bidet
We know many of you can perform basic DIY installations. But we recommend a licensed electrician. And licensed electricians are likely to recommend a GFCI (ground-fault circuit interrupter) outlet for your bidet seat electrical requirements.
If you are using the bidet properly, and if your bidet is of high quality, you should not have to use toilet paper to wipe yourself clean. A high-quality bidet will clean your backside more thoroughly than any amount of wiping. However, you may want to use a small amount of toilet paper to dry yourself.
Those who are unfamiliar with bidets may wonder where the water comes from. Rest assured, bidet water comes directly from your home water supply and is sanitary. Bidet water does not come from the toilet tank. Bidet toilets and bidet attachments connect to the water line usually located behind your toilet.
Cleaning the anus after defecation using the bidets contributes to hand hygiene and local comfort, and it may be effective against constipation. However, excessive bidet use potentially causes anal pruritus and anal incontinence (AI).
If you press the 'Dry' button, provided there is one, the air dryer will dry the area. If you are using the traditional bidet, you can dry using toilet paper or a towel. In most public toilets with bidets, towels are provided on a ring next to it. However, using a paper towel is a more hygienic and safe option.
lifetime toilet paper supply. Plus, while a single roll of toilet paper requires 37 gallons of water, a bidet uses just one-eighth of a gallon. Aside from having some impressive benefits for the planet, bidets are great for your bottom, too.
Today, most bidet toilet seats offer warm water in place of the chilly spray of yesteryear. While this warm water serves mainly the same purpose, it's much more comfortable to be subjected to and may even provide a more thorough clean than its ice-cold counterpart.
A typical bidet uses about ⅛ gallon of water per use. For comparison, the amount of water needed to flush a toilet is upwards of four gallons. Where a bidet really shines, though, is in water usage compared to toilet paper production. About 37 gallons of water are wasted producing just one roll of toilet paper!
How long you run the water is a matter of personal preference. I've found spraying for 20 to 60 seconds is enough to get the job done.
This useful feature allows up to two users to save their preferred settings on the bidet seat. This can be extremely helpful and make your bidet experience much more enjoyable and less time consuming.
In Australia, the installation of bidet products connected to the drinking water supply must be undertaken by a licensed plumber. This ensures that the installation complies with the Plumbing Code of Australia, and the appropriate cross-connection protection is provided.