On average, most toilets will have a lifespan of between 10 and 15 years, even with regular use. The lifespan may vary depending on the toilet model and the wear and tear it experiences over the years. Most toilets will start to give you warning signs indicating the time for replacement is near.
For most toilets, a 20-year lifespan is the outer limit. A toilet may continue to work after this, but it will be at a higher risk of starting to leak and suffering from numerous clogs and other repair issues. Get ahead of the problem and replace a toilet that's 20 years or older.
Should I Replace My Old Toilet? While your old toilets may technically do their job, they're simply not as efficient as newer models. Not to mention if your old toilets start to show their age by cracking, leaking, or clogging, it's often best to consider toilet replacement rather than repair.
Most plumbers agree that an average toilet can last around 50 years. However, this is only when the toilet is well maintained and gently used. If it was improperly installed or frequently misused, it may not last as long.
Average Cost to Install a Toilet. The cost to install a toilet can range between $224 and $532 and averages $372. Toilets, by themselves, can cost between $99 and $450 at home improvement stores and labor costs can vary, depending on the plumber and amount of work needed.
While toilets are meant to last several decades, they do have a limit. If you know your toilet has been around longer than you've been alive, then there's a chance that it's likely on its last leg already. A general rule of thumb is to replace a toilet around every 25 years, though your mileage may vary.
According to the Energy Policy Act of 1992, toilets installed after 1994 must have a flush volume of 1.6 gallons per flush. Toilets manufactured before this policy went into effect used between 3.5 to 5 gallons. The bottom line on aging toilets? If you know your toilet is at least 25 years old, consider replacing it.
Do toilets wear out? Well, no, not actually. The bowl and the tank are built to last for ages. The parts inside the tank, the flush handle, the seat, the lid and the bolts that hold the toilet to the ground and the seal around the base of the toilet may need toilet repair or replacement.
When drains aren't used for long periods of time, the water barrier can evaporate and leave an open path for sewer odors to enter your home. For this reason, it is important to run water in the shower, sink, and toilet every once-in-a-while.
The average toilet installation cost in Australia is between $300 – $400. The price can be lowered if replacing a toilet is at a basic level, from $150 – $250. Buying a new toilet can increase the price to over $500, a more expensive toilet can increase this drastically.
The biggest difference between older toilets and the models available today is the amount of water they use. Toilets manufactured after 1992 need less than half as much water per use as many older units, while providing a better flush and new convenience features.
Most toilet problems are easy and inexpensive to repair. As long as your toilet works well, is not physically damaged or cracked, and fits nicely with your bathroom décor, repair is often the best option. A professional plumber can make quick work of nearly any toilet problem, including: Toilet clogs.
An occasional repair is normal, but if you're constantly having to fix toilet issues, that can become a costly and time consuming problem. One or two toilet issues is to be expected, but if you are frequently and consistently running into the same problem, or even multiple problems, a new toilet is the way to go.
Once a week at least.
coli can be found within six feet of the toilet and in the sink. To keep it at bay, disinfect the toilet and sink at least once weekly, and the bathtub every two weeks — more if you shower often.
Older Toilets Use More
Generally speaking, the older the toilet, the more water it uses. Toilets built before 1982 use 5 to 7 gallons per flush. Now, toilets are designed to flush using only 1.6 gallons of water.
In essence, that depends on your skill level and experience, plus the type of toilet you have. If you've done this before, it should be a piece of cake. However, if it's your first time, and depending on the complexity of the job, it could take anything from one to four hours on average.
Replacing a toilet costs between $275 and $480. This includes removing the old toilet and installing the new toilet.
Replacing and installing a new toilet isn't as hard as it sounds. All you need are a few hours, a helper and the right tools and toilet parts for the job.
My basic premise for any toilet restoration is that as long as the porcelain tank and bowl are not cracked, or there are no significant chips and no sections missing, it can be restored. These photos illustrate the process of the toilet rebuilding. The tank and lid are original to my house.
Do NOT pour boiling water down your sink or toilet. In recent years, DIYers looking to find a green alternative to chemical products have suggested pouring a potful of boiling water into a clogged sink or toilet to clear a clog.
Barring there are no other issues, to remove and replace a toilet should take a professional plumber about 30 minutes. If your question has to do with how much should it cost, most plumbers in Midwest charge between $100-$150. Most charge this based on a minimum 1 hour charge.
You might be tempted to try and save a few dollars by installing a toilet yourself but it is not a good idea. A toilet should always be installed by professional licensed plumbers. This is required under the Australian Standards which are quite strict.