At least 24 hours is the minimum, and try for 48 hours or more if you can. Don't hit the power button to “test it out” or “see if it's fixed yet” before that time. If there's still water inside, it can easily conduct electricity to places on the circuit board that it's not meant to go. The end result?
Leave your phone in an airtight container full of silica gel packets (those small packets you get inside new shoes and bags), or another drying agent. These help absorb the moisture.
Place your phone in an airtight container and completely cover it with your choice of desiccant. Leave the container for 24-48 hours for the material to draw all the moisture out of your handset.
In a small number of cases swamped phones are able to dry out on their own over the course of days or weeks. But it's not common.
If you backed everything up - you should be okay. But more importantly, phones don't die upon immediate contact with water, meaning you can fix them even when there's significant damage.
Do not -- we repeat, do not -- use a blow dryer; the heat can damage the phone. If you have a phone or a gadget with a cover that comes off, take it off, and take out the battery, the SIM card, and anything else that can easily be removed. Dry all those things off.
Blow-drying your phone when it's exposed to water is not recommended. While it might remove some of the surface moisture, it will do very little to remove the moisture from inside your device and the heat could do irreparable damage to your phone's internal components.
Shine a flashlight on the inside, and you should see a solid white strip or a white strip with pink, purple or red Xs if your phone does not have water damage. If you see a strip with a solid pink, purple, or red color, it means that water or moisture has entered your phone.
Like rust on a car, it slowly starts to grow over the course of a week, a month, or 3 months. It will begin to spread until one day your wifi won't work, your camera goes out, your phone stops charging, the screen goes black, or some combination of all those things.
IP68-rated phones can be submerged in up to 1.5 meters of water for up to 30 minutes.
A) Leave Your Phone to Evaporate.
Just leave the phone somewhere for 1 – 2 hours to let it dry up. Moisture will naturally evaporate within a few hours when you place your phone in an open room with a warm temperature. If you're on a typical warm day, put your phone by the window to catalyze the drying process.
According to Apple, you should leave your phone in a dry area with some airflow to help remove moisture. You can even place it in front of a fan blowing cool air to "help the drying process," the company says.
Use Silica Gel Packets (Not Rice)
Instead, use silica gel packets. They are used in packaged and boxed products (such as shoes) to absorb moisture, and can do the same for your phone. Place a few silica gel packets under your phone and on top.
Does Water Damage Happen Immediately? Water damage happens quickly, usually within 24 hours. If you notice any signs of water damage, it normally isn't something you can fix on your own.
Generally, it takes around 72 hours for any affected area to dry up completely, but this only applies on a room-to-room basis. Larger areas impacted by water damage take longer to dry. Regardless of what caused the water damage, you need to follow specific protocols to reinstate your house to its pre-damage state.
Depending on the severity of water ingress, it can take anywhere from a few days to a few weeks to dry a wet property out.
The most obvious sign that you have a leak or a burst pipe somewhere in your home is large water stains on your walls or ceilings. If you have a water stain on your ceiling, it indicates a leak on an upper level. These types of water stains are most common in areas that contain either a bathroom or a kitchen.
Putting anything inside your phone's charging port is a bad idea because you could push the moisture further in. Cotton swabs, toothpicks, and paper towels can all damage your charging port. Don't use a hair dryer. The heat of a blow dryer can damage the electronics inside of your iPhone or Android.
If your iPhone won't turn on after coming into contact with water, it can be one of two things; either the iPhone has short-circuited, or the water has damaged or corroded some internal components and compromised the circuit. Both can be irreversible if the phone isn't looked at by an iSmash technician.
Pop your smartphone in a bowl of dry rice, covering it fully, and leave for a minimum of 48 hours. When the 48 hours is up, check the ports for rice and remove any grains with a small pair of tweezers. Now you can switch on your phone.
Like rust on a car, it slowly starts to grow over the course of a week, a month, or 3 months. It will begin to spread until one day your wifi won't work, your camera goes out, your phone stops charging, the screen goes black, or some combination of all those things.