How many words are in a 60 second script? For most English-based video scripts, you should aim for 120-180 words in a 60 second script. The average 60 second script has 150 words in it – which is a natural speaking rate of 2.5 words per second.
For those in the U.S. speaking English, the average rate is around 150 words per minute. Once you've written your script, you can figure out how long your video will be by dividing the word count by 150. So, if your script has 300 words, your video will run approximately 2 minutes accounting for speaking alone.
Video Length: 2 minutes = 240-word script
It's important to keep as close to this rule as possible, so you don't write more content than you can fit into your video. This rule is based on the average reading speed.
Stick to these rules of thumb: 15 Second Spot – 30 to 40 words. 30 Second Spot – 75 to 85 words. 60 Second Spot – 150 to 170 words.
Timing and Word Count
However, a :60 second script, is between 160 and 180 words. The average person speaks around 130 words per minute, so 180 may be slightly faster than the way a person would talk normally.
The average person speaks roughly 2-3 words per second. So, a 30-second spot script could be roughly 75 words. For a 60 second script, you get around 150 words. Of course, your script will need to be shorter if you plan on including sound effects or jingles, which limit how much time is available for the voiceover.
Generally speaking, hour-long episode scripts can be anywhere from 45-63 pages, although a majority of the time you want to stick with 50-55 pages. The basic sense of it is that one page equals one minute, and with a 60-minute show, you obviously need to account for commercial breaks.
Feature film scripts usually run between 80-120 pages for an approximately 1.5 or 2-hour movie; each script page corresponds to approximately one minute of screen time.
First and foremost, what is the generally accepted screenplay page count? A feature film screenplay's page count will traditionally be between 90 – 120 pages.
The general "script page to minutes" rule of thumb is that one page of a screenplay equates to one minute of screen time.
The 90-120 page rule
Scripts written in proper screenplay format average a page per minute. A feature is roughly an hour-and-a-half – two hours long. Thus the 90 – 120 page rule. Screenwriting books and expensive screenwriting gurus will all tell you that scripts should fall within the 90-120 page rule.
The average feature screenplay, traditionally, is between 95 and 125 pages long. In Hollywood these days scripts generally don't run longer than 114 pages. Comedy scripts are typically shorter, dramas longer. There are, naturally, variations.
Answer: 2000 words is 4 pages single spaced or 8 pages double spaced.
In a screenplay, one page roughly equates to one minute of screen time. This means that as a general rule of thumb, screenplays typically run from 90 to 120 pages long. Screenplays are made up of many scenes, and each scene can be as short as half a page or as long as ten pages.
A 50-page script which becomes a 100-minute movie would have a ratio of 0.5, a 100-script and 100-minute movie would have a ratio of 1 and a 100-page script which created a 50-minute movie would have a ratio of 2.
Word Count
All you need to know is that 10,000 words of script will occupy around an hour of stage time and pro rata from there – so 1000 words take six minutes3.
It's a one-hour drama separated into five parts, probably about 55 pages, although they can be longer. I think my pilot for Grey's Anatomy might have originally been 72 pages long. They tend to be long. But between 55 and 60 pages long, divided pretty much evenly into five acts.
Playwriting thought of the day #5 : for a theatre play, an hour of playing time is 9,000 to 10,000 words. Basic but no one tells you this! Think in minutes - after a thousand words, the audience are six minutes into the play. And so on.
So, if you want to write an hour-long pilot for a traditional network, aim for around 44 or 45 pages. If you plan to write an hour-long pilot for a premium channel or streaming service, aim for a script in the neighborhood of 55-65 pages.
That being said, there are some general guidelines which can help you make an educated guess at approximately how many words will be needed for a speech. The general rule for speech giving is 100 to 200 words per minute. With this in mind, a 10-minute speech would require 1,000 to 2,000 words.
Just slightly longer than a more common word count of 750 words, 800 words is about one and three-fifths of a page single spaced, and a little over 3 pages double spaced.
A 150 word count will create about 0.3 pages with single spacing or 0.6 pages double-spaced when using normal 1-inch margins, 12 pt. Arial font, and a standard A4 (letter size) page size.