Generally, an article 1,000 words long will take about 5 minutes to read at the average pace.
This means reading 1,200 words will take you between 6 and 9.6 minutes. Want to read faster? Try these tips.
Depending on the number of words on each page, reading at a normal speed equals 12,000 to 18,000 words per hour. As you get older, your reading speed will gradually decline.
How long does it take to speak 1,000 words? Assuming an average speaking speed of 125 to 150 words per minute, it would take approximately 6:30 to 8 minutes to speak 1,000 words.
If your average speaking speed is 150 WPM, the average word count for a 5-minute talk would be 750 words. If you speak faster or slower than this, the word count of your presentation will need to be adjusted accordingly. Consider a minimum of 650 words and a maximum of 850 words.
Answer: At the normal speaking rate of 130 words per minute (wpm), a 10 hours long speech will have about 78,000 words .
Average reading speed by page
The average college student can read approximately 20 pages per hour of easy fiction and non-technical material (the average textbook contains 800 words per page). For technical material, the average student can read around 11 pages per hour (149 wpm).
On average there are 750 words in a 5 minute speech. This is based on the average speech rate of 250 words per minute.
How long should it take to read 1000 words aloud? Working with an average of 200 words per minute, it should take 5 minutes to read 1000 words aloud.
As a rule of thumb, most people talk at about 100 words per minute, so in a 15 minute conference talk, you can say only about 1500 words. If you were reading aloud (which you shouldn't), that would be about 6 pages of double-spaced text in 12-point font.
The general rule for speech giving is 100 to 200 words per minute. With this in mind, a 10-minute speech would require 1,000 to 2,000 words.
You really want to be aiming to write 1000 words in 45 minutes. That means about 250 words every ten minutes, or 25 words per minute. It sounds like a lot, but considering the words you use most often are quite short ('the', 'and', 'a', etc.) it's not actually that much of a stretch.
Research shows that 1000 wpm is too fast for an average reader. Notice that you need to see about 16 words per second. Your eye can focus on a group of words about 2 times per second. This means on average you need to look at 8 words per fixation!
If you're a fast reader, you may read at closer to 400 words per minute. This means reading 2,000 words will take you around 5 minutes.
If you're a fast reader, you may read at closer to 400 words per minute. This means reading 500 words will take you around 1.3 minutes.
Answer: At the normal speaking rate of 130 words per minute (wpm), a 2 hours long speech will have about 15,600 words .
"If you understand and appreciate that," says Elizabeth Schotter, a cognitive psychologist at UC San Diego, "it becomes really obvious that no human being can read 1,000 or 2,000 words per minute and maintain the same levels of comprehension they do at 200 or 400 words per minute."
High school or college students who need to memorize or learn the material they're reading typically go through 100 to 200 words in a minute. Anything above 400 wpm is fast reading, while a reading time of 700 wpm falls under speed reading.
Answer: the average reader takes about 2.8 hours to read 100 pages. You might take more or less time than 2.8 hours to read 100 pages, depending on your reading speed and the difficulty of your text. The average person's reading speed is around 300 words per minute (WPM).
If you're a fast reader, you may read at closer to 400 words per minute. This means reading 200 pages will take you around 4.2 hours.
The average 60 second script has 150 words in it – which is a natural speaking rate of 2.5 words per second. It is possible to get up to 180 words in a 60 second script, but the voiceover will be on the cusp of sounding rushed.
Video Length: 2 minutes = 240-word script
It's important to keep as close to this rule as possible, so you don't write more content than you can fit into your video. This rule is based on the average reading speed.