Ask your tailor for: Ask your tailor to end the hem of your pants no more than ½ of the way down the shoe. Your socks will show slightly when you are standing and walking so make sure you are wearing your favorite pair.
Near the bottom of the ankle, before your foot starts is a good point for the hem. However, if you desire a longer pant and the fabric works you can go longer. Just don't go too short, a straight pant can easily look like a too-long ankle pant or “highwaters” when too short.
The hem of your pants with a half break should sit ½” to ¾” past the point where your pants first meet your shoes, this will allow a slight horizontal fold to make contact with the front of your shoes. A half break can work with both slimmer pants and those that are less tapered and more straight leg.
Second, the length will also depend on the style of pant you're going for. For example, if you're going for a more formal look, you'll want to opt for pants with a longer inseam. If you want to wear dress pants casually, you can opt for a shorter, more tapered inseam.
The hem of your pants with a half break should sit ½ – ¾” of the way down past the point where your pants first meet your shoes, allowing for a slight horizontal fold to make contact with the front of your shoes.
Appropriate trouser length, or the Inseam, depends on the wearer's preference. Typically, adjusting from a full break to half break, or half break to no break, the Inseam should be shortened by about 0.5”. Our trousers can be lengthened by up to 1” and shortened by up to 4”.
It is very easy to fix trousers that are either too long or too short. Plus, it is an alteration that won't cost you more than $10-$20. There are also some brands, whose trousers come with unfinished hems so that you can decide the optimal pant length per your likings.
A 1” hem is standard for dress pants or khakis. If you are hemming jeans, a 1/2” hem is standard. Turn the pants inside out. For a 1” hem, use a tape measure or hem gauge to measure 2” above the pinned fold line.
1. The back of the pants should be 1/2 inch from the floor while the wearer is in his/her dress shoes. 2. If the shoes are not available, the pants should touch the floor while the wearer is in his/her stocking feet.
Generally, skirts, dresses, and coats have wider hems (2 to 3 inches or 5 to 7.5 cm) than jackets, pants, and blouses (1 to 2 inches or 2.5 to 5 cm). Straighter edges have deeper hems (2 to 3 inches or 5 to 7.5 cm) than flared or circular edges (1/2 to 1 inch or 1.3 to 2.5 cm).
In actuality, the time it takes to hem the suit is not long at all – the tailor can probably do it completely within 30 minutes. That being said, you should not expect that they will be able to do it right away, since they also may have other people's items and tasks to do.
Home-hemmed pants are simple enough that it can take anywhere from a few minutes to a little over an hour. The time it takes for hemming depends mainly on the material and structure of the pants. Hemming wool and silk-lined dress pants, for example, is going to be slightly different than hemming jeans.
You have the perfect pair of pants for the occasion, but they are too long for you. Thankfully, you only need to take a quick drive to the drugstore to solve this at a moment's notice. One of the fastest ways to hem your pants is using a fashion hem tape that's available either on Amazon or from your local drugstore.
Waistline – the waist of your dress pants should sit above the hip bone comfortably, not so tight it pinches, and not so loose they need a belt to stay up. Seat – the seat of your dress pants, from your waist to your thighs, should drape smoothly, with no pulling or sagging.