Finally, stains last far longer than sealers. Protects wood from both fungal rot and UV damage. Lasts longer than sealers. Wide choice of colours.
Sealant will sometimes have pigment that will color the wood when applied, but stain will always have pigment. Additionally, the levels of protection vary between the two products. Stain offers little to no moisture protection, while sealant offers tremendous moisture protection.
The order which you apply stains and sealants varies on what you're currently working with. For the best performance, we recommend stain first, seal second, and apply Advance Topcoat third. This will provide the best protection of your home.
To properly answer your question of “Do you have to seal stained wood?”, the answer is no. However, if you want to protect your wood and give it a polished finish, it's smart to do so. It's worth taking the extra steps and applying a wood stain sealer.
The Cons of Staining Wood
While some stains can last up to five years, postponing re-staining a wood surface for too long can cause the job to become more complex and labour intensive. Even decks that are stripped and re-stained will still require maintenance every couple of years.
Wood stain won't adhere well to damp wood and can crack and peel. Apply stain to dry wood when it hasn't rained for several days and the forecast calls for at least two days of dry weather between 50° F and 90° F.
Staining is not always advisable, but it can solve a lot of problems. Before you stain any piece of furniture, take a good look at it. If it's made of cherry, maple, mahogany, rosewood, aged pine, or any of the rare woods, the wood should probably not be stained; these woods look best in their natural color.
Outdoor wood stains are water repellant, so they make the wood waterproof, that is protecting it against water and, as a result, against mold. The only problem is that it is a short-term protection. As the stain wears out, the water easily finds a tiny crack to penetrate the wood.
You don't HAVE to seal stained wood, but applying a proper sealant will protect the wood from rings, stains, and damage.
How long do you need to wait before sealing wood after staining? For best results, wait at least 24 hours before sealing the wood. If you are concerned the stain isn't quite dry enough, wait another day before applying poly.
We always recommend two coats of stain for any wood project, but you should only apply as much stain as the wood can absorb. Extremely dense hardwoods may only be able to absorb one coat of wood stain. The general rule of thumb is to apply only as much deck stain as the wood can absorb.
Answer: Most people like to stain and seal at the same time, although you can come back a week later and seal if you like. If you're going to wait between staining and sealing, just do a light power wash to clean the concrete and let it dry prior to sealing.
Interior Water Based Poly Crystal Clear. For the best water-based interior wood stain sealer, there is ZAR® Interior Water Base Poly Crystal Clear. This non-yellowing and environmentally safe formula provides essential wood protection, whether it is stained or left natural.
The sealant will (very, very slightly) darken the wood, but if you whitewash your piece it will help maintain the natural and original color. 4. Use a sponge brush to eliminate brush strokes, and apply the General Finishes Flat Out Flat topcoat.
Sanding sealer should be used after the wood has been sanded down to a bare finish but before the topcoat (such as paint) has been applied. Applying sanding sealer to a stained surface is generally not recommended, as the sanding step will scuff away the stain.
While staining creates a rich, deep color that highlights natural wood grain, it does not provide long-term protection. Without a protective top coat, wood can be damaged easily due to contact with water, food, or sharp objects. A polyurethane top coat protects the wood from scratches, stains and water damage.
Two coats are generally better than one
If the deck has been properly cleaned, it should absorb the first of stain well in to the wood. By applying a second, light coat of material, you will fill up the cell structure of the wood (kind of like topping off the tank) and the project will last longer.
Let water-based stains dry for two to three hours and oil-based stains for four to six hours before applying a polyurethane sealer. The best way to get a smooth finish is to apply the first coat of sealer, let it dry, and then lightly sand the surface with 220-grit sandpaper before applying a second coat.
Stains and oils penetrate wood best when it's cool and dry. If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat.
Solid stains require recoating after 4-5 years, on average. Sealers do not provide any coloration of the wood, but they protect it against moisture that causes rot and splitting. Most sealers last one cycle of seasons and should be renewed each year.
Types of Stains
Semi-opaque stains hide much of the wood grain beneath wood pigment; however, these last longer and should be reapplied every 3-4 years. Solid or opaque stains have the riches color and hide the grain the most. These last the longest, needing reapplication about every 4-5 years.
If you're just using a regular stain, it can provide some degree of protection compared to totally unfinished wood. But it isn't good enough. If you set a drink on a piece of wood that you've stained by not sealed, for example, it's going to leave water rings that you can't wipe out.
You should sand after the first coat of water-based stain to flatten any wood grain the water raised, but it's unnecessary after that. You don't need to sand between coats of gel stain or oil-based stain.
Water-based stains need to be stripped off before you apply a new finish, while oil-based stains can be recoated after you use a deck cleaner. To test the stain: Apply a small amount of deck stripper to a small area on your deck. Let it sit for about 15 minutes, then wipe it off with a cleaning rag.