Sealing Cons
The two main drawbacks to having your concrete and paving sealed are 1) Regular Maintenance, and 2) Resealing. 1. Regular Maintenance. The biggest myth regarding having your concrete or paving sealed is “if you get them sealed they will never get dirty again”.
The Drawbacks of Seal Coating
There are some drawbacks to sealcoating, however. One is that it can be messy and difficult to apply evenly. It's also important to note that sealants will not repair significant damage to your driveway; they will only protect it from further damage.
If it isn't already obvious, having a concrete sealer greatly improves your driveway's ability to stand up to the elements, thereby allowing it to last longer. With proper application of the sealer and regular resealing, a concrete driveway can be expected to last for many years without forming any cracks.
One of the biggest disadvantages of concrete driveway sealing is the cost. The materials and labor required to seal a concrete driveway properly can be expensive. In addition, concrete driveways that are improperly sealed can trap moisture underneath the surface, which can lead to problems such as mold and mildew.
Concrete should be sealed to protect from mold and mildew.
When this moisture doesn't dry and the surface is left wet for an extended period of time, mildew begins to form and mold begins to grow. You'll know you have mold growing on your concrete by the greenish color that appears.
If you want to clean your concrete, there are a few things to keep in mind. You should use a pressure washer or other high-pressure water source to remove stains such as oil and grease. When using a pressure washer, be careful not to damage the sealer on your driveway by putting too much pressure on it.
Acrylic Concrete Sealers: Acrylic sealers last 1-3 years before they need to be re-coated. Epoxy Coatings: Epoxy coatings last 5-10 years before they need to be re-coated.
For it to be successful though, you need to apply the first coat of sealant within 12-18 months after asphalt installation, and then again every 2-3 years. Any more frequent than this and your driveway may begin chipping or flaking, but any longer than this and your driveway could deteriorate.
Driveway sealing can protect your investment. The bottom line is that sealcoating and proper maintenance for your driveway can prevent small cracks from turning into big ones and keep water from seeping into the base material.
If you have a concrete driveway, the springtime is the best time to have it sealed. Whether you just had your concrete driveway poured last year or you've had it for quite some time now, sealing your driveway helps to protect it from the elements and help it to last longer overall.
Homeowners need to seal their driveway every 2 or 3 years or as necessary. Keep in mind to never put off sealcoating for more than a year. Otherwise, it will only cost you more. Before sealcoating, it's important to also seal cracks and potholes.
Seal coating allows for a smoother, crack-free driveway, and because smoother pavements extend pavement life by as much as 10% to 25%, you won't have to worry about replacement or repairs for a much longer period of time.
It All Begins With Pressure Washing the Driveway
However, getting out all of the dirt and grime along with stains is a must before permanently securing them onto the driveway's surface with a sealer. Beyond prepping for sealing treatments, there are numerous reasons for pressure washing driveways on a routine basis.
These can last up to 25 years in some cases, but we recommend re-sealing concrete driveways every 5-10 years.
Another major drawback of sealed concrete flooring is their propensity for showing scratches and wear in high foot traffic areas.
Rain can wash away all of the hard work that you put into your driveway. The sealer will be washed away by the rain if you don't wait long enough for it to dry.
Too much sealer can lead to premature cracking, which will shorten the lifespan of your driveway.
Applying two coats of any sealer will dry and create a better finish much better than one thick coat. These sealers are water based, and they cure and form a film primarily during the evaporation of water from the coating. A thin coat will evaporate much faster and create a single uniform layer.
After discussing the factors you need to look for and the regional location of the project, in broad terms, Spring is in fact the best time of year to seal concrete. With its moderate temperatures and humidity levels, it tends to provide ideal conditions for the application and curing of sealers.
For new concrete, allow it to cure for at least 28 days before sealing it with any kind of sealer. You can seal old concrete any time as long as no old sealing products are apparent. To know when to reapply topical concrete sealers, look for signs of wear, flaking, or discoloration.
Another mistake to avoid is applying the sealer too thickly. Concrete sealer is supposed to dry quickly, but it won't if you put too much on, and this compromises its long-term effectiveness. It's better to apply it too thin and apply a second coat later.
If the surface is more than 5 days old, a light acid wash and pressure clean are required prior to sealing. Acid etch with hydrochloric acid. Dilute 20 parts water to 1 part Dulux Avista Hydrochloric Acid (depending on porosity) to remove any loosely bound cement and laitance.
The acid washing of concrete is a requirement after the concrete has cured sufficiently, in order to remove surface efflorescence and to open the pores before sealing. This will help the sealer to penetrate and result in a superior bond between the sealer and the surface.