The setup button has two primary functions. First, this allows you to reset your AirPods to create a new, and possibly better, connection with your audio source. Second, this button can also activate manual pairing, which is very useful when you're trying to connect to a non-iOS device.
This is where the button on the back of the case comes in. Once pressed with the earbuds in the case, the button acts as a way for the AirPods to enter a pairing mode, allowing users of a non-Apple device to connect to them.
Open Control Center on your iOS or iPadOS device. While wearing your AirPods Max or both AirPods, touch and hold the volume slider until you see the additional controls. Tap the Noise Control icon in the lower-left corner. Tap Noise Cancellation, Transparency, or Off.
Open this listening mode shortcut
Swipe down on the top right of your iPhone or iPad screen and long-press the AirPods icon on the volume bar. This will open a shortcut to toggle between ANC modes, as well as Spatial Audio. It's a much quicker process than going through the AirPods menu or Bluetooth settings.
There are many reasons why your AirPods might have trouble pairing with your Bluetooth devices. Some of the possible reasons include a low battery charge, Bluetooth issues, software update problems, hardware damage, debris on the AirPods or charging case, and more.
Play the next track: Double-press the stem. Play the previous track: Triple-press the stem. Answer a call: When you receive a call, press the stem. Switch between Noise Cancellation and Transparency mode: You can set either of your AirPods to perform this action when you press and hold the stem.
AirPods (3rd generation) and AirPods Pro (2nd generation) are sweat and water resistant for non-water sports and exercise, and they are IPX4 rated. Sweat and water resistance are not permanent conditions. MagSafe charging requires a compatible MagSafe charger. Wireless charging requires a Qi-certified wireless charger.
Turning off noise control on your AirPods isn't a default control, so you'll have to set it yourself from your AirPods settings in the Bluetooth settings menu on your iOS device. In the noise control section, “off” will be unchecked by default.
Make sure that you have the latest software on your connected iPhone, iPad, iPod touch, or Mac. Put both AirPods Pro in your ears and check that Active Noise Cancellation (ANC) is turned on. Clean the mesh located on the top of your AirPods Pro.
If you have AirPods Pro (1st or 2nd generation) or AirPods (3rd generation), you can tap the case when it's on the charging mat to see whether your AirPods Pro or AirPods (3rd generation) are charging (amber light) or fully charged (green light).
To charge your AirPods, put them in your case. Your case holds multiple, full charges for your AirPods, so you can charge on the go. To keep your AirPods charged, put them in the case when you're not using them.
Your AirPods will give you up to 6 hours of listening time or up to 4.5 hours of talk time on a single charge. However, the battery life differs between models and depends on the volume, use of features, and many other factors. For example, Apple rests its battery life claims on tests performed at 50% volume.
General FAQ. How do you do the Airpod listening trick? Set Live Listen up by opening Settings, selecting Control Centre, then Customize Controls, then Hearing. You'll now be able to access Live Listen from the Control Centre. Now you can hear anything said around your phone through your Airpods.
Your AirPods Pro (1st and 2nd generation), AirPods (3rd generation), MagSafe Charging Case for AirPods (3rd generation), Lightning Charging Case for AirPods (3rd generation), and MagSafe Charging Case for AirPods Pro (2nd generation) are water and sweat resistant, but they are not waterproof or sweatproof.* The MagSafe ...
Playing and pausing music
Almost all of your AirPods Pro's basic controls are based around the force sensor, a small touchpad built into the stem. To use the force sensor, you need to lightly squeeze the stem. Just tapping or pressing it won't do anything.
Take a picture
When you have the camera app open, hitting either of the volume buttons on your Apple EarPods will snap a picture. Pro tip: Prop up your iPhone and leave your headphones out to get a wider-shot selfie.
Even a tiny droplet of sweat can potentially short-circuit the AirPods, and their case is susceptible to such damage. Moreover, splashes of water, which are otherwise safe for water- and sweat-resistant devices, can deteriorate their sound quality over time.
To conclude, there is no possible way to charge AirPods without its case. These AirPods are designed to charge only when kept inside their case but not through a wall adapter or USB port directly.
Calibrate the Apple AirPods with your iPhone
You can reset the AirPods if needed, and this might clear up odd quirks in its operation. If the volume is still too low after cleaning your AirPods, you can try calibrating it with your iPhone.
The best ways to clean AirPods and other earbuds
If you use any liquids to clean your earbuds, dry them completely before use. For the microphone and speaker meshes, use a dry cotton swab and a soft-bristled brush to gently wipe away dirt. Don't press too hard, since you don't want to push the wax through the mesh.