An all-purpose cleaning solution comprised of ¼ cup of baking soda (sodium bicarbonate) and a cup of white vinegar will work wonders on your toilet, as per Tips.Net. Baking soda (a base) will react with vinegar (an acid) to create a fizzy cleanser. Mix and dump them in the bowl, wait several minutes, scrub, and flush.
Sprinkle baking soda around the top of your toilet before using a cup of undiluted white vinegar to swill the pan. Finally, grab a toilet brush and give the entire toilet bowl a good scrub. This will not only clean the toilet of stains, but it will also eradicate any strong urine smells that are lingering.
However, Green living expert Mark Lallanilla says that plain old white vinegar is an effective cleaner. To eliminate hard water stains, soak toilet paper in vinegar and place directly on top of the stain. Let the vinegar-soaked paper sit overnight. The next morning, flush to rinse and the stains should be gone.
Vinegar will not damage your toilet in any way if it's left in your toilet overnight. Regardless of your toilet's material, the vinegar is not strong enough to damage the toilet or the toilet's plumbing. So, you can leave the vinegar in your toilets overnight without worry.
To remove tough stains, add the baking soda and vinegar mix to your toilet and then allow the solution to sit in the bowl for up to 30 minutes. During that time, the chemical reaction between the sodium bicarbonate and vinegar will work to eat away at those stubborn hard water stains.
Combined, baking soda and vinegar can sometimes clear a clogged sink, but in many cases, they can also take care of a toilet clog. However, to avoid a small eruption all over the bathroom floor, you'll want to measure them very carefully.
Also, make a simple routine part of your weekly cleaning: Sprinkle the toilet with cup of baking soda. Let it sit for 30 minutes, then spray or squirt with vinegar (a mild acid) to moisten. Scrub with a bowl brush and flush away [source: Niagara County].
How long can you leave vinegar in a toilet tank? Leave vinegar in the tank for several hours, ideally overnight. This allows the acetic acid in the vinegar to break down stains and deposits effectively.
You can use straight or a diluted vinegar cleaning solution for the bathroom to clean bacteria, especially around the toilet. Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight.
Let the Solution Sit
Let the vinegar and soda solution sit for up to 30 minutes. If there are any stains above the water line, it would be helpful to go over them with your toilet brush one or two more times. One final scrub before you flush should remove any still stuck stains. Flush to rinse.
In this case, a basic toilet cleaning product may not be enough, and you will need to use undiluted bleach. As a one-stop cleaning solution, pour one cup of bleach around the bowl. Then tackle every inch with a toilet brush or a handheld scrub brush. Let it sit for five minutes, then flush.
Vinegar and baking soda produce that oh-so-familiar chemical reaction that powers through buildup and loosens tough stains. While it might seem like it's chewing its way through grime, it's not powerful enough to damage the porcelain finish of the toilet bowl.
Cleaning your toilet bowl with vinegar is quick and easy
Get Green Be Well warns about choosing the right type of vinegar for the job — always use white vinegar. Though apple cider vinegar cleans just as effectively, its brown coloring can stain the porcelain.
Apple cider vinegar effectively cleans most of the bathroom, including the toilet. You can spray the ACV into the toilet bowl or pour about 1/2 cup into the bowl and let it sit for 15 minutes. Then, scrub as usual, and flush. Alternatively, you may add a layer of baking soda to the toilet bowl before you clean it.
The contaminants notorious for causing brown stains in toilet bowls are iron, manganese and sulfur. These pollutants can also produce iron bacteria, manganese bacteria and sulfur bacteria, which also can produce brown stains.
When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
The fizzy drink can actually remove hard-to-clean stains on the inside of a toilet bowl. You can either pour cola directly onto the stains themselves or cover the entire inside of the bowl by putting cola into a spray bottle and spraying on a light coating.