The average women's ring size is L½ and the average men's ring size is Q. Guessing your partner's ring size correctly can be done with a little common sense. If you have a petite partner, it's likely that their hands are smaller with slender fingers, so try starting at a size H or I for women, and around an N for men.
For women the most common ring size in Australia is an N or O. For men it is a T or U. These are the equivalent of a US 7 for women and a US 10 for men. Before you can actually make use of your knowledge of Australian ring sizes you will need to know how to measure your ring size.
The average ring size for most women is between a size 5 and size 7. We also know that the average sized woman in the U.S. is about 5-feet 4-inches tall. You can go off these averages to determine her ring size without her knowing. If she's shorter or weighs a little more, you can go up a size or two.
Women's rings are commonly between sizes 3 (14 mm) and 9 (19 mm), while men's rings are usually sized between 8 (18.2 mm) and 14 (23 mm).
Generally speaking, any finger that is sized up to US 5 is considered small. The size US 5 measures 49 millimeters in circumference or 15.6 millimeters in diameter. This doesn't mean that brides with a small finger size will have trouble finding a ring, though. The average women's ring size is US 6, followed by US 5.
The average ring size for women is Size 7. The average ring size for men is Size 10. We are often asked what is an average or "normal" ring size for a man or woman.
Australian Ring Size Guide
Australian ring sizing follows a scale of letters, typically from ring size F through to Z. Standard women's ring sizes usually fall into three categories: small: I-M, medium: N-Q and large: R-U. Men's rings are usually at the larger end of the scale, although this is not always the case.
Simply put one of your partner's rings on your finger and remember (or mark) where it stops. A jeweler can measure that part of your finger and get a good estimate of the size of that ring. Each finger is typically a different size, so make sure to use a ring that your partner actually wears on the ring finger.
The truth: shoe sizes and ring sizes have no connection to each other – any similarities are pure lucky coincidence.
You can be creative with how you bring it up in conversation. One idea would be to ask her ring size because you are buying a ring for your sister, mom, relative, etc. Whether you actually buy that ring is up to you, but you could ask her to give her ring size to get an idea of what size to get for the present.
Rule of Thumb: A proper fitting ring should slide over your knuckle with a little friction and fit snugly on your finger, but not too tight. You should feel resistance and need to apply a little extra force to remove the ring backwards over your knuckle.
You can easily determine your own ring size with a measuring tape or a cord. To measure simply place the cord (or the measuring tape) around the finger where you want to put the ring. The ends of the cord should be marked. Use a ruler to measure the cord and determine your ring size in mm.
finger is at its largest. base of your finger as well as your knuckle and select a size between the two to allow enough room to comfortably slip over your knuckle. For a wider band (larger than 6mm), select one size larger than what your actual ring size is, wider bands take up more space on the finger.
In conclusion, resizing a ring in Australia can cost anywhere from $50 to $500 or more, depending on various factors such as the type of metal, complexity of design, size adjustment, experience and reputation of the jeweller, and the type of ring (simple gold or silver bands, diamond or gemstone-studded rings, or ...
Small hands will probably fit either a 50 or 52 on the index finger and a 49-50 on the ring finger.
Making a ring smaller will almost always cost less than making it larger because there are no costs for added materials. To make a ring smaller, jewelers typically: Cut the band in the back. Remove the necessary amount of metal.
After years, fingers and/or knuckles usually get bigger. It's best to have your ring resized while you can still take it off.
Should you go larger or smaller? If you're between ring sizes or there's a reasonable difference in your size throughout the day, a good thing to bear in mind is that it's always better to go for a slightly larger size than one that's too small, so you should err in that direction.
Generally speaking, if your ring spins freely on your finger, it is usually considered too loose. A ring should only move around the finger or up and down the digit with manual force applied or friction and resistance. It should not be loose enough that it can slip over the knuckle.
Typically, rings can be increased or decreased up to two sizes. Beyond that, it can put too much stress on the ring. If you can't have your ring resized until a future date, your jeweler may add a ring guard to make it a little more snug.
The most commonly purchased women's rings range between size 5 and size 7. Size 6 is the most popular. The average ring size available for men ranges from size 6 to size 13. The most commonly purchased men's rings range between size 8 to 10-½.