What is the best way to clean the inside of a toilet?

The most effective way to clean your toilet is by using Borax, which is a multi-purpose cleaning product that effectively cleans hard water stains in the toilet and other plumbing fixtures.

Takedown request   |   View complete answer on bunnings.com.au

What should I use to clean the inside of my toilet?

Professional cleaners often use the same household supplies as you would: toilet-bowl cleaner (or bleach), disinfectant wipes, rubber gloves, as well as a nonscratch scrub sponge, a microfiber cloth, or paper towels. A handheld scrub brush or a pumice stone can get to especially tough stains.

Takedown request   |   View complete answer on architecturaldigest.com

What is the most sanitary way to clean a toilet?

How to Clean a Toilet
  1. Begin by applying toilet cleaner to the bowl, and allow it to soak. ...
  2. While the cleaner soaks in, spray the exterior of the toilet with an all-purpose disinfectant. ...
  3. Next, use a scrub sponge to clean the exterior of the toilet. ...
  4. Once the exterior is clean, use a toilet brush to clean the bowl.

Takedown request   |   View complete answer on mollymaid.com

How do you clean a badly stained toilet?

Pour a half-cup of hydrogen peroxide into the toilet and let it sit for 30 minutes. Use your toilet brush to scrub the stains. Add a sprinkle of baking soda and scrub again if the stains persist. Turn on the water and flush away stains and germs.

Takedown request   |   View complete answer on maids.com

How do you deep clean a filthy toilet?

Try this: Swish a cup of vinegar around in the toilet bowl using a toilet brush, then add a cup of baking soda, followed by an additional cup of vinegar. Let the fizzing solution sit for 10 minutes. Use a toilet brush to scrub stains. Let mixture sit for a few more minutes and then flush.

Takedown request   |   View complete answer on filtrete.com

CLEAN LIKE A PRO: Cleaning the Toilet!

42 related questions found

How do you clean built up grime in a toilet?

Add 2–3 cups of vinegar to the bowl, being sure to pour it directly on stains. You can also put a few layers of vinegar-soaked toilet paper on the stain. Let that brew for 2–3 hours while you spring clean elsewhere. Then give it a scrub and flush.

Takedown request   |   View complete answer on greatist.com

How long can you leave vinegar in the toilet?

Let It Sit For 12 Hours

Leave the vinegar and water mixture in the toilet tank for 12 hours without flushing the toilet. This is why this cleaning process is best done overnight, as you are less likely to need the bathroom throughout the night than during the day.

Takedown request   |   View complete answer on organizedmom.net

Can you leave baking soda and vinegar in toilet overnight?

If the clog still seems to be intact, start over at step 1 and repeat the process a couple of times. For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging.

Takedown request   |   View complete answer on mrrooter.ca

What is the best toilet cleaner to remove brown stains?

The best way to clean toilet stains from tough mineral buildup is with lemon juice or any source of citric acid. Spray on the lemon juice and leave it overnight. Then spay on another light layer and wait a few minutes before scrubbing your toilet. Flush to rinse away the stain.

Takedown request   |   View complete answer on fivestarrated.com

Does WD 40 remove toilet bowl stains?

When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.

Takedown request   |   View complete answer on wd40.com.au

Should you clean the inside of your toilet?

You should clean the toilet tank twice per year. If you are using water from a well in an area with hard water, clean the tank quarterly to keep the flush valves in good working order.

Takedown request   |   View complete answer on thespruce.com

How often should you clean the inside of your toilet?

To keep it at bay, disinfect the toilet and sink at least once weekly, and the bathtub every two weeks — more if you shower often. Your shower curtains should be disinfected weekly to avoid mildew, which can cause skin, eye and throat irritation in some people.

Takedown request   |   View complete answer on nbcnews.com

How do I get brown stains off the bottom of my toilet bowl?

For example, applying white vinegar or lemon juice and scrubbing with a toilet brush typically works on newer stains. You can also try mixing white vinegar and baking soda if you need a stronger scrub. For older stains, using an industrial-strength cleaner like CLR should do the trick.

Takedown request   |   View complete answer on angelwater.com

How long can you leave baking soda and vinegar in toilet?

Let the vinegar and soda solution sit for up to 30 minutes. If there are any stains above the water line, it would be helpful to go over them with your toilet brush one or two more times. One final scrub before you flush should remove any still stuck stains. Flush to rinse.

Takedown request   |   View complete answer on thespruce.com

How long to wait after putting vinegar and baking soda in toilet?

Pour one cup of baking soda into the clogged toilet, and then chase it with the hot water/vinegar mixture. Leave the volcano mix to do its job, checking in about 30 minutes. In most cases the clog will have come apart, and a simple flush with send it all down the drain. Plus your toilet bowl will be cleaner!

Takedown request   |   View complete answer on erplumbing.com

How long to leave baking soda and white vinegar in toilet?

A staple of the house cleaning it is, without a doubt, a very versatile product.
  1. Pour 1/2 of a glass of baking soda in your toilet.
  2. Add 1/2 of a glass of white vinegar.
  3. As soon as the mix lathers, leave it for 30 minutes.
  4. Then clean out the surface by scrubbing with the toilet brush.

Takedown request   |   View complete answer on superbath.co.uk

How do you pour vinegar and baking soda in the toilet?

Follow the steps below carefully:
  1. Step 1: Evaluate how bad the clog is: ...
  2. Step 2: Pour the baking soda into the toilet bowl: ...
  3. Step 3: Pour the same amount of vinegar into the bowl. ...
  4. Step 4: Pour a full pot of hot water into the toilet to help push the clog out.

Takedown request   |   View complete answer on allamericanplumbingservices.com

Is it safe to put white vinegar in the toilet bowl?

You can use straight or a diluted vinegar cleaning solution for the bathroom to clean bacteria, especially around the toilet. Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight.

Takedown request   |   View complete answer on necscleaning.co.uk

Does vinegar damage porcelain toilets?

Vinegar and baking soda produce that oh-so-familiar chemical reaction that powers through buildup and loosens tough stains. While it might seem like it's chewing its way through grime, it's not powerful enough to damage the porcelain finish of the toilet bowl.

Takedown request   |   View complete answer on hgtv.com

What cleans thick limescale from toilets?

For a more heavy-duty approach, you can pour an entire bottle of white vinegar over and around the bowl, remembering to cover all of it. Then, leave the vinegar to work for a few hours or overnight. Use your toilet brush to scrub any leftover limescale deposits away the next day.

Takedown request   |   View complete answer on plumbworld.co.uk

Does Coke remove limescale from toilet?

Coke - contains phosphoric acid which can not only remove rust, but also limescale.

Takedown request   |   View complete answer on aquatell.ca

Why does the inside of my toilet turn brown?

If you get brown stains in your toilet bowl, the good news is that it's not caused by anything that you, ahem, do in the bathroom. It's actually due to high concentrations of minerals in hard water, like calcium, iron, and manganese, that build up inside the toilet bowl over time, according to Hunker.

Takedown request   |   View complete answer on housedigest.com

What is the brown sludge under my toilet?

Not only may you have a brown toilet ring, but you also may have staining in the bottom of your toilet bowl. The staining comes from hard water, which contains a high concentration of minerals mainly iron, manganese, or limescale compounds.

Takedown request   |   View complete answer on livtucson.com

What is the brown sludge at the base of my toilet?

A few different things can cause the brown build-up at the bottom of your toilet bowl. One possibility is that your water contains a high level of iron, which can leave behind rust-colored stains. Another possibility is that you have hard water, which can also cause mineral deposits to accumulate in your toilet.

Takedown request   |   View complete answer on kiwicleanhome.co.nz