Hydrogen peroxide is good for more than sterilizing cuts-it can kill mold too! If you've got hydrogen peroxide in your household cabinet, you are more than ready to tackle that toilet bowl and tank mold. Pour a cup of hydrogen peroxide into the toilet bowl. Use a toilet brush and scrub the entire bowl.
Flush the toilet and wipe the seat and rim with a 1:10 bleach-water solution. Scrub any remaining mold stains with a toilet brush or similar non-abrasive material. Add 1 cup of bleach to the tank and flush. For maintenance add 1 cup of bleach to the tank a few times a week or consider a bleach toilet tab.
Why is there mold in my toilet bowl? The toilet bowl is a prime breeding ground for mold due to humidity and darkness. You will find mold growing in this area of your toilet if you have been away for a while and the toilet is left unused. Leaving waste in the bowl for a long time can also trigger mold growth.
Tips for Treating Mildew With White Vinegar and Baking Soda
If you've noticed mildew in your bathroom, you can typically get rid of it using some white vinegar and baking soda.
Pour distilled white vinegar into the tank (with water in it) and allow it to sit for about 120 minutes. Flush the toilet a few times. If you still see mold, you will need to turn off the supply valve and drain the toilet tank. Then use a toilet brush or similar non-abrasive material and scrub the remaining mold spots.
Green or brown stains in the toilet usually indicate lime buildup. Lime scale forms as hard water evaporates and leaves a mineral buildup behind. As it dries, it picks up any dirt particles along with it, and slowly the stain builds, layer by layer, on the inside of the toilet bowl. Yuck!
Because water deposits build up under a toilet's rim, it can take only 24-48 hours for colonies to start breeding. As it grows, you will see what looks like black debris or rings inside the bowl. This can cause respiratory problems for people as the mold and mildew release tiny spores into the air.
To get rid of toilet mold with vinegar, the first thing you will need to do is pour 1 cup of vinegar into the toilet bowl and another cup of vinegar in the tank with the water. This then assures that both your bowl AND tank will be cleaned.
Baking soda and vinegar, when mixed together, can form a chemical reaction that looks sort of like an eruption. This chemical reaction can help clear your toilet and any pipe clogs that you might have.
Having mold around the toilet is something relatively common but that doesn't mean it's normal. Although most people don't realize it, you should treat the mold problem as your top priority to get rid of it since it's not good for your health, especially if you have respiratory problems, such as asthma.
Black particles in the toilet bowl water
The black particles are likely the result of the disintegration of the float in the toilet tank. The float is especially likely to break down over time if you use an automatic toilet bowl cleaner in the tank. Replace the float or call a plumber about replacing the float.
Vinegar is a great toilet cleaning solution. Not only is it free of chemicals and naturally antibacterial, it's also an acid, so it will remove minor lime and calcium deposits. All you need to do is pour a couple cups of vinegar in your tank and let it sit for an hour or so, then scrub and flush to rinse.
To safely and inexpensively clean your toilet bowls, pour a generous glug of vinegar, followed by a heavy sprinkling of baking soda, into the bowl. While the mixture is bubbling up, scrub the bowl (get under the rim, too). Let it soak for 30 minutes and flush. That's it.
Combine 1 part bleach with 2 parts water in a spray bottle and spritz the affected area. Let the solution sit for 10 minutes. The mold should start to fade away on its own, but if areas of stubborn mold remain, use a coarse brush (for larger areas) or old toothbrush (for smaller areas) to scrub the mold away.
Using White Distilled Vinegar to Kill Mold. White vinegar is most commonly found with 5% acidity and works best undiluted, so don't worry about mixing it with water first.
For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging. If your toilet remains clogged or continues to get clogged, this may be an indication of plumbing problems such as mineral buildup or pressure issues.
You can use straight or a diluted vinegar cleaning solution for the bathroom to clean bacteria, especially around the toilet. Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight.
Vinegar will not damage your toilet in any way if it's left in your toilet overnight. Regardless of your toilet's material, the vinegar is not strong enough to damage the toilet or the toilet's plumbing. So, you can leave the vinegar in your toilets overnight without worry.
How Long Does It Take for Vinegar to Kill Mold? Depending on the amount of mold, let the vinegar sit on the mold at least 60 minutes before wiping or scrubbing.
While it is possible to use bleach to kill mold as well, experts agree that vinegar is a much better option. Unlike bleach, vinegar can effectively kill the mold at the root, which means it's less likely to return. Vinegar is also less toxic than bleach, making it a better choice for household use.
You can find pink mold in the shower, tub, toilet and other places around the bathroom. It's usually not as hazardous to your health as black mold and other fungi, but there are some pink mold dangers, such as urinary tract infections, intestinal problems and in rare cases pneumonia.