Simply pour about half a cup of dish soap into your toilet bowl, followed by one cup of vinegar, then let it sit for about 30 minutes before flushing. Using dish soap and vinegar to unclog your toilet is not only cost-effective but also eco-friendly.
Caustic Soda
Caustic soda is a nasty chemical that can burn, but it's very effective for unclogging toilets. To use this chemical, you need to get some rubber gloves and eye protection. You can pick up the chemical from the local hardware or grocery stores.
You may just be using it incorrectly. Do this: Next time you have a clog, use your plunger like this: Ensure the flange lip is unfolded. Get a good seal on the toilet drain (that is, make sure you're covering the entire drain or you won't have enough pressure to loosen the clog.)
If a plunger or plumbing snake doesn't work, water and soap might do the trick. Boil a gallon of water and allow it to cool for about 10 minutes. As you wait, pour a cup of liquid dish soap into the toilet bowl. You can then pour the water slowly into the bowl — leave it for about 20 minutes before flushing.
After all, it works great on your kitchen sink and bathtub, why not use it for the toilet? Well, there's a very good reason you shouldn't use Drano for toilet clogs – it can permanently damage your toilet.
Just as natural dish soap helps break down dirt, grease, and food that may be stuck on dishes and utensils, it can help break down what's in your toilet bowl. The important thing is to reach for a non toxic dish soap that, once it's flushed and enters the water supply, will be safe for animals and the planet.
Hot Water and Dish Soap
Wait for 10-15 minutes while the dish soap and hot water soften the clog. Once you do so, the toilet will unclog and flush freely. Alternatively, you could use hot water and shampoo from the sink if you wish to clear your toilet without leaving your bathroom.
In this scenario, squeezing liquid hand soap, body wash, or shampoo into the toilet should net you the same results. STEP 2: Let the soap sit for about 20 minute so it can coat and loosen the clog for maximum flushability.
4 ounces over three days
Simply flush 4 ounces of Drano® Max Build-Up Remover down the toilet for three consecutive days. Do this before leaving for work or going to bed, as it's best to avoid flushing your toilet for 6-8 hours after each treatment.
It is Extremely Corrosive For Your Drains
This can put a great deal of stress on your drains as the heat can cause PVC pipes to soften and even break or collapse. While it is dissolving your clog, Drano can also quickly eat away at the glue holding your pipes together, leading to a potentially costly leak.
Some of the best Drano alternatives include using a plunger or pipe snake, soap or salt mixed with boiling water, or baking soda and white vinegar. Also, for maximum effectiveness, you can combine several of these methods together to get rid of the clog.
Best Overall
In just 15 minutes, our pick for the best drain cleaner, Drano Max Gel, will clear up clogs in sinks, tubs, PVC, septic tanks, and garbage disposals. It's safe for piping and septic systems, with a thick gel that sinks into standing water to the source of the clog.
Baking soda and vinegar may unclog your drain better than Drano ever could. Start by getting rid of the standing water in your drain. If it will go down slowly, just wait until it's gone. If it isn't moving, use a cup or a spoon to get it out of there.
Damage to Plumbing Fixtures
In addition to the pipes, leaving Drano in the drain for too long can damage the plumbing fixtures. This includes the sink, shower, bathtub, and other plumbing fixtures connected to the drain. These fixtures can become corroded and discolored and can start to show signs of wear and tear.
Deploy Drano. Does this particular clog seem bust-up proof? If standing water remains, use Drano® Max Gel Clog Remover. It pours straight through the water and attacks the clog directly.
Plunge it Out
When Drano won't go down the drain, grab a plunger instead. Many people think that these are only good for toilets. However, they can create suction that can dislodge your clog. If you're using a plunger, choose one that is suited for the type of clog you're dealing with.
After pouring it down the drain, let it fizz and work its corrosive power for an hour or two before running hot water. Coke and Pepsi are loaded with phosphoric acid, which breaks down the buildup that can clog your drains!
Baking Soda & Vinegar
Clear the area around your sink and put a 1/2 cup of baking soda down the drain. Follow that with a 1/2 cup of vinegar. Now plug your drain and let it sit for an hour. Then, unplug the drain and pour a pot of boiling water down it.
You may be surprised to learn that pouring soda down the drain does work for some clogs. To be specific, you need a dark-colored cola (such as Coca-Cola or Pepsi). This type of carbonated beverage usually contains a good amount of phosphoric acid, which given enough time, can eat away at some types of clogs.
Baking Soda and White Vinegar
This mixture is a great green alternative to Drano because most people have these items somewhere in their kitchen. To use this method, pour half a cup of baking soda into the clogged drain and follow it with a half cup of white vinegar.
It is not a great drain clog remover. Bleach has no effect in dissolving the common culprits of household drain clogs, like hair, food scraps and grease.