Because diamonds reflect white light, colorless diamonds produce the best sparkle and fire. In fact, the more color a diamond has, the less likely it is to reflect white light. And as a result, will produce less sparkle. A D-color diamond is the highest quality, and will offer the greatest sparkle.
The way each of a diamond's tiny facets are cut and polished determines how much sparkle the diamond will have, which means the style and quality of cutting and polishing are equally important. More facets create more sparkle, and to achieve maximum sparkle, each facet must be cut and polished properly.
A simple plan to keep your diamond jewelry looking beautiful is to soak it in a gentle degreasing solution, such as water with a few drops of mild dish soap, once or twice a week. After you remove the diamond from the cleaning solution, use a soft, clean toothbrush to remove any remaining dirt.
Round Brilliant Cut
The round cut is the most brilliant or the most sparkling diamond cut. Fifty-eight facets (including the culet) are cut into brilliant round diamonds to allow light to pass through and reflect off each facet.
The fewer inclusions and blemishes a diamond has, the better it will reflect light. This means the higher the clarity, the better the sparkle.
Round Cut Diamonds Sparkle The Most
The standard round cut diamond comprises 57 facets (58 including one on the bezel). This cut heightens the diamond's sparkle and shine. Because round diamonds have the largest number of facets, they create the most sparkle.
Check out the following comparison of the diamond ring when it is clean versus when it is dirty and covered in grim. You see, diamonds are a magnet for grease/oil as their surfaces muck up easily. A dirty stone doesn't sparkle because light simply can't enter the diamond and causes it to appear dull.
Diamonds need to be cut and polished to enhance their appearance before being made into jewelry, and this process gives diamonds the many facets they need to catch the light and send it glittering in every direction.
Even a moderate amount of dirt, grime or otherwise unpleasant sediment and “film” can have a severe effect on the sheen and shine of that precious stone in your precious ring. And over time, things like hand lotions, powders, soap, hairspray and more can really build up on and dull your diamond's glitter and glimmer.
While vinegar is slightly acidic and needs to be used with caution on more porous stones, it will do a fabulous job on your diamond ring. Simply mix a half cup of white vinegar with 2 tablespoons of baking soda. Stir until the baking soda is totally dissolved, then soak your diamond ring in the solution for 2–3 hours.
It's easy to make the mistake of neglecting your diamond jewelry because you know how hard and durable the material is. While diamonds don't lose their sparkle, they do tend to get dirty. Use the following tips to keep your diamonds brilliant and clean: Clean your ring regularly.
A diamond that has not been cleaned for a while can look milky due to a buildup of film and dirt on its facets. Cloudy diamonds can also have diminished transparency from inclusions or other characteristics intrinsic to the crystal from which they are cut.
Since “white” is not a color, but rather the sum of all colors, it doesn't appear on the color spectrum. What Makes a White Diamond? The presence of sub-microscopic inclusions scatter light passing through the diamond, giving it a translucent “milky” white face-up appearance.
A diamond sparkles through the interaction of the light with how the diamond is cut. In most cases, the quality and the type of the cut govern how a diamond reacts to the light surrounding it. As light enters a diamond, it will travel through it, reflecting on its facets (the interior surfaces).
Fill a bowl with warm water. Double-check that the water is not too hot so you don't scald your hands. Add some detergent to the water and mix well until you get a homogenous, soapy solution. Soak your cloudy diamond in the soapy solution for approximately five minutes.
Drop your ring into a shot glass filled with a clear hard alcohol like vodka or gin. Allow the ring to soak for several hours. The ethanol content is a natural solvent that dissolves dirt molecules attached to the diamond.
However, the diamond is less likely to shine if it doesn't have a good cut. As a result of a poor cut, the diamond will have much more of a dull appearance that can make it appear hazy, taking away from that shine that people often want when investing in diamond jewelry.
A couple of additional features may also elicit a diamond's cloudy appearance: Fluorescence – When exposing diamonds to UV light, they glow at differing degrees of brightness. If a diamond possesses a strong fluorescence, it may appear chalky. Most often, this characteristic arises in colorless diamonds.
Diamonds can sustain damage, but it's more common for them to lose their luster. Diamonds might lose their sparkle over the course of time depending on a handful of factors. Even if your diamond is of exceptional cut, color, clarity, and carat weight, environmental conditions can wreak havoc.
It's the beautiful, classic round diamond. Round brilliant cut diamonds are easily the most expensive diamond shape. In part, that's because round is the most popular diamond shape. More than half of all the diamonds sold today are round diamonds.
The F color grade is only two grades below the highest color grade of D, which is considered to be completely colorless. F color diamonds are considered to be of high quality and are popular among buyers who want a high-quality diamond that appears colorless.
If you are shopping for a radiant diamond, prioritize color over clarity. Look for a radiant diamond with at least an H grade on the color scale if you want your diamond to appear colorless. Clarity is not as important as color when it comes to pear-shaped diamonds.
Using hand sanitizer while wearing a ring won't cause immediate damage to diamonds or gemstones, but can leave a filmy residue on the stones over time, dulling the sparkle.