Nahani Trap size and availability: 110 x 75 mm, 110 x 90 mm, 110 x 110mm, 90 x 50mm, 90 x 63mm.
Nahni Trap is another name for floor traps. Nahni Trap prevents filthy vapors from entering the structure by providing a water seal. A water seal with a depth of at least 50 mm should be provided. The floor trap prevents foul gases (terrible odors) from entering the structure if wastewater flows.
Nahani trap is a floor trap that collects water and garbage from fixtures like bathtubs, sinks, showers and washing machines. In plumbing, traps play a crucial role. They stop illness from spreading through the structure by blocking the entry of sewage gas, insects, and rodents.
The Multi trap is a SWR fitting provided in the sunken floor as well as the suspended ceiling to collect waste water from the washbasin, shower, sink and bathroom areas. USP: This fitting can be used for multiple draining i.e. bathroom / washbasin / washing machine / bathtub drainage lines.
The drain must connect to a trap that blocks the gas by catching water in a curving section of pipe, creating an airtight barrier. For a floor drain, the minimum trap size is 2 inches. If you install a larger floor drain, you need to install a larger trap as well.
Floor trap is also known as nahni trap. Location- Nahni trap located in bathroom. Gully trap is usually made of stoneware and a cast iron grating is provided at it top. It is fitted inside the masonry chamber.
The “S” trap is prohibited under the Uniform Plumbing Code throughout the United States. This is because the “S” trap will siphon or suck water out from the trap which will end up releasing methane (sewer) gases into the home.
The traps of floor drain are also of equal importance as of floor drain, only the difference is floor trap is used to trap the big dust particles. In this floor trap usually, those particles get trapped which cannot be drained with floor drain because of its small hole.
Traps come in 1-1/4 inch (standard bathroom sink) or 1-1/2 inch (standard kitchen sink) inside diameter sizes. Be sure to check so you get the right size replacement at your local store.
Choosing the Right P-Trap
You'll need to identify the P-Trap you're replacing. Kitchen sink P-Traps come in 1-1/2” standard size, while bathroom sinks use P-Traps of 1-1/4” standard size.
Trapways can be no smaller than 1.5 inches in diameter according to the Institute's guidelines. Most toilets have larger trapways than the minimum standard for better performance. The most common sizes for toilet trapways are between 1.75 and 2 inches, although some models can be as large as 3 inches in diameter.
This trap is provided in the floor to collect waste water from shower, balcony, WC drain area, and kitchen sink areas. The removable Jali section facilitates cleaning and maintenance. USP: Different variants of Nahani traps of different heights can be used in low height balconies as well as in toilet areas.
The barrier creates a seal that prevents sewer gases from coming back up your drain. The P-trap is now the standard since the S-trap was deemed ineffective and prohibited in new construction under the Universal Plumbing Code.
Determine your pan type
Australia has three common pan types: S-trap, P-trap and Skew trap. The trap is the bend in the toilet pipe that expels the waste. The S-trap has a waste pipe that's connected to the floor, while a P-trap pipe connects to the wall.
A person who sets a trap or device with the intention of causing, or being reckless as to whether or not there is caused, serious injury to another person (whether a trespasser or not) is guilty of an indictable offence. Penalty: Level 5 imprisonment (10 years maximum).
P-traps can be used for plumbing that exits through both the wall and the floor, making them usable for any plumbing fixture. There may be some difficulty in replacing your old S-trap to a P-trap so it would be advisable to seek professional help before taking on the replacement yourself.
A gully trap is provided outside the building to connect waste pipe to the external sewerage line. It collects wastewater from the kitchen sink, wash basins, bathroom, and other wash areas. Nahni trap: This trap is generally used to admit sullage from the floors of rooms, bathrooms, kitchen, etc.
This is a common SWR fitting used in combination with Pushfit & Solfit Pipes. It prevents transmission of unfavourable odours from the washroom to the living area. Can be connected to the shower area and WC if the branch line outlet is in the vertical position.
In domestic applications, traps are typically U, S, Q, or J – shaped pipe located below or with in a plumbing fixture. The most common of these traps are referred to as a P trap.
Our company is the foremost in offering PVC Floor Drain. Relying on our expertise in this domain, we are offering HDPE Channel Drain.
Plastic traps come in inside-diameter sizes of 1-1/4-in. for a standard bathroom sink; 1-1/2-in. for a laundry sink, bathtub or standard kitchen sink; and two inches for a shower or floor drain.
There are three common drain sizes for bathroom sinks, 1.25", 1.5" and 1 5/8 (1.625"). You need to select a drain that is the same size or SMALLER than the hole in your sink. For example, if you have a sink with a drain hole of 1.75", than any of the drains 1.25", 1.5", or 1.65" will work.