Let water dissolve the clog, and try flushing again after several hours. By pouring a caustic soda (coke, for example) into the toilet bowl, you can speed the dissolving process along considerably. Simply dump a can of cola in the water and let it eat away at the debris.
Cola Drain Cleaner Trick
Pour the entire bottle down the clogged drain. Allow it to sit in the drain for at least an hour or two (or even up to 24 hours for stubborn clogs). Flush drain with boiling water. Repeat as necessary.
We recommend you add a cup of baking soda to your blocked toilet and wait for some minutes. Next, pour two cups of vinegar slowly into the toilet. Vinegar and baking soda will typically react to form bubbles, so ensure you pour carefully and slowly to prevent the toilet water from overflowing or splashing.
Coke. Coke and other colas are actually surprisingly decent pipe cleaners, so drain at will! They contain phosphoric acid, which will break down certain buildups in your pipes.
While the baking soda and vinegar solution is effective in breaking down a clog, it will also cause your drain to become more damaged. The baking soda's abrasive nature will wear down your drain over time. This is why you should avoid using baking soda and vinegar solution for cleaning out your drain.
Pour Coca-Cola along the edges of the toilet bowl — the carbonation will take care of the heavy lifting for you! Leave the soda in the toilet overnight. The next morning, flush the fizz away and your toilet will look good as new.
I did two 30-second intervals for 1 cup of Coke. You want to coat the entire toilet bowl with Coke. It'll run down and mix with the water, but leave behind an invisible layer of acid residue. The hardest part is letting the Coke work its magic.
If the clog is minor, pour all of the baking soda measured into the toilet bowl. If the clog is severe, pour up to one-half a cup of baking soda in the toilet. Remember to use equal parts of vinegar and baking soda. So, for every one cup of baking soda you use, use one cup of vinegar.
Coca-Cola contains phosphoric acid, which gives it its tangy taste, and the acid can help clean off dirt. You get the same effect if you use other acidic foods and drinks, like lemon juice. However, Coca-Cola isn't effective at killing germs, and there are lots of products that are much better at cleaning.
Baking soda can be used in a few ways to help unclog a toilet. After your attempts at plunging have failed, try pouring around 1 cup of baking soda in the toilet bowl, suggests WikiHow. There's no need to measure exactly, but you'll follow this up by adding about a gallon of very hot water on top.
Pour a half-cup of hydrogen peroxide into the toilet and let it sit for 30 minutes. Use your toilet brush to scrub the stains. Add a sprinkle of baking soda and scrub again if the stains persist. Turn on the water and flush away stains and germs.
While it can be put to a number of helpful uses around the home, WD 40 is particularly good at softening rust and limescale deposits in the toilet (and bathroom). All you have to do is spray it on the desired section of the toilet, wait a few minutes, then scrub it away with a toilet brush.
Well, if you've just spotted a toilet ring, you can use baking soda and vinegar to remove the ring in an almost effortless manner. Baking soda, also known as sodium bicarbonate, is a great cleaning agent for many household surfaces, and when combined with vinegar, the duo's cleansing power is doubled!
If you're wondering, “does cola stain?”, the answer is yes.
Well, if you leave a soda open too long, it'll go flat, meaning it loses carbonation. Carbonation is carbon dioxide bubbles, the bubbles you see in soda, if you leave it open too long, the air escapes, and it doesn't taste good anymore.
Rinse out the stain with cold water from the back. Pre-treat colors with Clorox 2® For Colors 3-in-1 Liquid. Wait 10 minutes then machine wash in the hottest water allowed using detergent and more Clorox 2® For Colors 3-in-1 Liquid. Keep the item out of a hot dryer.
To get started, purchase a two-liter bottle of Coke and allow it to acclimate to room temperature. After pouring it down the drain, let it fizz and work its corrosive power for an hour or two before running hot water.
Try pouring hot water down the drain, then follow it with one cup of bicarbonate of soda and a cup of vinegar. Leave it for ten minutes, then chase it with more hot water. A combination of the hot water and the natural cleaner mixture can break blockages up.
Baking Soda and Vinegar
Mix together 1/3 cup of baking soda and 1/3 cup of vinegar. The result will fizz almost immediately—it's important that you pour it down your clogged drain right away so you don't lose the effects of that reaction.
For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging. If your toilet remains clogged or continues to get clogged, this may be an indication of plumbing problems such as mineral buildup or pressure issues.
You can use straight or a diluted vinegar cleaning solution for the bathroom to clean bacteria, especially around the toilet. Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight.
When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
base fizz up and let it sit for 15 minutes. Scrub the mixture into stains with a toilet brush. The mild abrasiveness of the baking soda following vinegar's acid breakdown should scrub away stains. If stains persist, let the solution sit for another 15–30 minutes and then scrub again.