A quick once-over with a cloth sprayed with WD-40 is great for removing soap scum from shower doors and can also prevent mildew from returning. It's also a great way to clean the grout between your bathroom tiles, remove stubborn stains from your toilet bowl, and rust stains on porcelain caused from aerosol cans.
Simply spray some WD-40 Multi-use Product straight onto the grout using the smart straw for extra precision and wipe it off with a sponge. Then wipe of the excess product and ensure surface is dry. If you're worried about how it will make your bathroom smell, you can always use the low-odour variety.
Mix together ½ cup baking soda, ¼ cup hydrogen peroxide, 1 tsp dish soap. Spoon cleaning agents onto grout and let sit for 5-10 minutes. Scrub the grout lines with a brush. Grout cleaning tip: Make sure to scrub hard to agitate the grout and cleaning solution and break up any really stuck dirt.
A light coat of WD-40 on a cloth can help remove soap scum from bathroom tiles and prevent mould and mildew. It can also be used to clean grout. Whilst WD-40 can be used effectively, we recommend using a dedicated tile cleaner such as LTP Multipurpose spray.
Just spray a layer of WD-40 onto your tiles, let it sit for a few minutes, and merely wipe it down with a clean cloth. For scuff marks on the floor or decals in the tub, you can rub WD-40 on it, and they should be cleaned up in a jiffy. It can also be used to clean your showerhead off all the bacteria and rust.
It is safe for metal, rubber, wood and plastic. WD-40 can be applied to painted metal surfaces without harming the paint. Polycarbonate and clear polystyrene plastic are among the few surfaces on which to avoid using a petroleum-based product like WD-40.
Combine equal parts white vinegar, rubbing alcohol and water, and then add ½ tsp. of liquid dish soap and a few drops of peppermint essential oils. This works well whether you use a bucket or spray bottle to dispense onto your floor as you mop. As an added bonus, peppermint oil deters ants and mice!
No matter how clean you keep your shower, hard water stains are going to accumulate. And they can be very difficult to remove from your shower doors. But if you have a can of WD-40 Multi-Use product on hand, you can remove hard water stains from shower doors quickly and easily.
Grout that hasn't been sealed, needs to be resealed, or is in poor shape should not be cleaned with vinegar. The vinegar penetrates into the pores of the grout, further weakening the material. Over time, vinegar will deteriorate the condition of the grout by etching or wearing it away.
Clean grout with a commercial grout and tile cleaner. Apply it to the dirty areas of the grout following the manufacturer's instructions. If you prefer cleaning grout with a DIY mixture, make a paste of 3/4-cup baking soda, 1/4-cup hydrogen peroxide and 1 tablespoon of mild dish soap.
One way to clean grout without scrubbing is by mixing hydrogen peroxide and baking soda. Add 1/2 cup of baking soda to 1/4 cup hydrogen peroxide and mix into a paste. Follow with a teaspoon of dish soap. Apply the mixture to your floor grout and let it sit for 5–10 minutes.
Saturate the grout with lemon juice, a mild disinfectant that gets rid of grout stains naturally. You can also use white vinegar for chemical-free grout cleaning. Simply pour vinegar from the bottle into the cap and pour it over the dirty grout lines. Allow the lemon juice or vinegar to sit for 10 to 15 minutes.
The secret of the blue dawn solution is the effect of cutting grease and grime. Blue Dawn dish soap is the best multi-purpose grout cleaner you can effectively use in your home.
For stubborn dirt, you can make a paste of baking soda and white vinegar to leave on the grout overnight, and then remove with a spray of water.
Little did you know that cola is great for cleaning tile grout! If you have dirty, dingy grout, pour a bit of cola onto the area, let it sit for a few minutes, and wipe clean. For tough stains, use a cleaning toothbrush to scrub the grout before wiping the area clean. Cola Cola can also be used on carpet stains.
Cleaning Grout with Baking Soda
Baking soda is a safe deodorizer, whitener, and household cleaner—and it's an effective natural grout cleaner. Because baking soda is also a mild abrasive, using it for cleaning grout lines gives you extra firepower without the risk of scratching your tile.
When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
WD-40 Multi-Use-Product is a great alternative for cleaning glass surfaces and mirrors. It removes sticky residues and smears leaving you with clear glass. Always remove the product thoroughly with a dry cloth.
Spray a generous coat of WD-40® Smart Straw®, all over the limescale areas such as the shower wall, faucet, glass, or kitchen sink. 2. Let the solution sit and soak for 4-5 minutes before scrubbing it all away.
Rinsing is not necessary! If you're simply using a vinegar and water solution to wipe and disinfect, you won't need to rinse. However, if there's also plenty of dirt and grime you're wiping away, you may also want to rinse with some extra water.
Mild dish soap is a surprisingly good floor cleaner. All you need is 1 to 2 tablespoons of dish soap mixed in with a bucket of water. Floors will be clean and shiny in no time. Dish soap is very effective on resilient floorings, such as linoleum and vinyl, and also works well on ceramic tile.
Baking Soda and Vinegar
To get rid of soap or grout stains on your tiles, just add some water to the baking soda and make a thick paste. Apply this paste generously to your tiles. Add a few drops of vinegar to the paste to clean your tiles even more effectively.