The answer is yes—mold can grow not only on concrete but also in concrete as the surface begins to degrade from the mold.
Black mold growth on concrete takes on the appearance of black spots, larger circular formations, or complex solid growth over an entire wall. Black mold in small amounts could also be mistaken for common mildew around damp basement areas but is much more dangerous.
During the winter months when the temperature drops, the cool surface of a concrete wall can cause condensation. In time this elevated surface moisture creates an environment conducive to mold growth. Mold growth on concrete due to humidity is typically diffuse and spread across a large area.
Vinegar Solution
Spraying a vinegar solution (1 cup of vinegar per gallon of water) onto the surface, saturating it fully, should kill most strains of mold. Vinegar spray can be followed by power washing or manual hand scrubbing to remove the dead mold.
When you use concrete sealers and coating you add a protective layer to the surface. This layer prevents water and moisture from penetrating the surface. Dry surfaces are less inviting for mold and mildew.
The acid that molds produce can degrade concrete, compromising its strength and integrity. While mold may not find enough nourishment in concrete alone, it can feed on moisture, algae, bacteria, salts, dust, pollen, dirt, dead skin, and other particles trapped within it.
Though many people assume that a new coat of paint will solve mildew and mold problems, it won't. That's because paint cannot kill mold spores or prevent them from spreading.
Getting rid of black mold with white vinegar
'Bleach will kill mold spores growing across a hard surface, but if the mold has extended below the surface, then white vinegar is the best choice,' she says. 'The vinegar will penetrate to kill the mold and mildew at the root, preventing it from regrowing.
Differences Between Mold and Mildew
Mold tends to have a higher profile and can even become fuzzy, while mildew is usually flat. Mold exhibits darker colors such as deep green and black; mildew may begin as white, then turn brown or gray.
Vinegar is an all-natural solution for cleaning concrete. It kills mildew and mold, removes grime, and helps treat set-in stains. Before cleaning concrete with vinegar, it's essential to dilute it so you don't affect your sealer. Here's what type of concrete to clean with vinegar and which types to avoid.
While mold only feeds on organic materials, it can grow on any surface, especially concrete. While concrete may not supply an abundance of organic material, it provides just enough mold to spread to other areas of a building.
Cover filled mold with plastic sheeting and allow concrete to harden in a cool (and level!) location for two days before removing from mold.
Mold growths, or colonies, can start to grow on a damp surface within 24 to 48 hours. They reproduce by spores - tiny, lightweight “seeds”- that travel through the air.
Black mold, as the name implies, is often dark in color. When searching for black mold, look for circular-shaped spots that are black, dark green or dark brown. Some black mold can also take on shades of orange or have flecks of white within it. Most of the time, black mold has a slightly furry appearance.
Black mold is known for its characteristic black hue after reaching maturity. However, the color black isn't unique to Stachybotrys — people often confuse it with similar-colored molds like Cladosporium, Aspergillus, Alternaria, and Dreeschslera.
Black mold is a fungus that may cause your immune system to react. Common symptoms include sneezing, coughing, congestion and eye irritation. It rarely causes serious illness or death but may worsen asthma symptoms.
Pay attention to the color and consistency: We already talked about black mold above, though it's more accurate to say that Stachybotrys chartarum has a greenish-black hue. Toxic mold can also have a grayish, soot-like texture, or a slimy, wet surface. In some cases, you may even notice furry orange or brown spots.
Black mold is dangerous, and can greatly affect your health if left untreated, so it's important to remove it as soon as you're aware of it. Before you can begin any black mold treatment, you'll need to perform a black mold test and find the source. It's often the result of excess moisture in a particular area.
Homeowners can handle cleaning about 10 square feet (roughly 3 feet by 3 feet) of black mold on their own. If the patch is small enough, a combination of bleach, water, scrubbing, and ventilation should do the trick. Before treating mold on your own, prioritize ventilation and protective gear.
Bleach kills virtually every species of indoor mold that it comes into contact with including mold spores which leaves a sanitized surface making it resistant to future mold growth.
All contaminated surfaces will be vacuumed with a HEPA vacuum to trap the mold spores while releasing clean air, unlike traditional vacuum cleaners. Next, a professional will spray and wipe down the once contaminated surface with microfiber cleaning cloths.
Black Mold Removal Using Vinegar
White vinegar is a mildly acidic product that cleans, deodorizes, and disinfects. It can also kill 82% of mold species, including black mold, on porous and non-porous surfaces. You can use it safely on most surfaces, and its offensive odor goes away quickly.
Best Concrete Cleaner for Mold and Mildew—Mold Armor E-Z House Wash. To combat mold and algae stains on concrete, consider Mold Armor E-Z House Wash concrete cleaner. This water-based cleaner uses Microban foaming technology to lift dirt and mold from concrete surfaces, and provides long-term stain resistance.
Unsealed grout, tile and concrete are very porous and therefore susceptible to mold growth. It's very common to see mold growing in the grout between the tiles in a bathroom or kitchen or on the concrete in your driveway.