Baking soda and vinegar, when mixed together, can form a chemical reaction that looks sort of like an eruption. This chemical reaction can help clear your toilet and any pipe clogs that you might have.
In some cases, it takes more than one dose of bicarb and vinegar to unclog a toilet. So if your first attempt isn't successful, go back to step one and start over. If a repeat treatment is necessary, leave the mixture for 30 minutes so it can really attack that stubborn clog before you add the hot water.
Also, make a simple routine part of your weekly cleaning: Sprinkle the toilet with cup of baking soda. Let it sit for 30 minutes, then spray or squirt with vinegar (a mild acid) to moisten. Scrub with a bowl brush and flush away [source: Niagara County].
If the clog is severe, pour up to one-half a cup of baking soda in the toilet. Remember to use equal parts of vinegar and baking soda. So, for every one cup of baking soda you use, use one cup of vinegar. Pour the baking soda first, then pour an equal amount of vinegar.
You can use straight or a diluted vinegar cleaning solution for the bathroom to clean bacteria, especially around the toilet. Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight.
Vinegar will not damage your toilet in any way if it's left in your toilet overnight. Regardless of your toilet's material, the vinegar is not strong enough to damage the toilet or the toilet's plumbing. So, you can leave the vinegar in your toilets overnight without worry.
Leaving those products in water overnight can also release fumes into your bathroom. The aforementioned baking soda and vinegar is a safer alternative for keeping your toilet bowl sparkling. You can add them to the toilet bowl at the end of the night for a good, cleansing soak until morning.
Pour a half-cup of hydrogen peroxide into the toilet and let it sit for 30 minutes. Use your toilet brush to scrub the stains. Add a sprinkle of baking soda and scrub again if the stains persist. Turn on the water and flush away stains and germs.
Vinegar and baking soda produce that oh-so-familiar chemical reaction that powers through buildup and loosens tough stains. While it might seem like it's chewing its way through grime, it's not powerful enough to damage the porcelain finish of the toilet bowl.
Try this: Swish a cup of vinegar around in the toilet bowl using a toilet brush, then add a cup of baking soda, followed by an additional cup of vinegar. Let the fizzing solution sit for 10 minutes. Use a toilet brush to scrub stains. Let mixture sit for a few more minutes and then flush.
Turn off the water to the toilet, flush the toilet to minimize the water in the bowl, and pour in a gallon of vinegar to remove scale and mineral deposits. Leave the vinegar in the toilet for 24-48 hours. This may improve the flushing.
If you need to clean the toilet quickly and you're out of cleaner, squirt a bit of toothpaste into the bowl. Grab the toilet brush and scrub away. The paste will remove stains and leave a fresh odor. It won't disinfect the toilet to get rid of bacteria, but it will work in a pinch.
Baking soda and vinegar, when mixed together, can form a chemical reaction that looks sort of like an eruption. This chemical reaction can help clear your toilet and any pipe clogs that you might have.
You can safely use vinegar to clean ceramic or porcelain tiles, whether they are glazed or unglazed. For other types, however, like terracotta, marble or grante, we recommend you look for ph neutral cleaner that will not harm the material.
Add 1/2 cup vinegar to the toilet bowl, let stand a few minutes, brush, and flush. If you have hard water, let the vinegar sit for an hour, and you may have to do some light scrubbing. To remove stains, add 1/2 cup borax to the water, swish it around, and let it soak overnight.
Vinegar and Baking Soda Scrub
Drain the water out of the tank. Add 2 tablespoons of Dawn, a cup of vinegar and ½ cup of baking soda. Use the toilet brush to swish it around. Scrub down the sides and bottom.
"The biggest don't when it comes to toilet tanks is bleach—do not use bleach or products containing bleach inside the tank, as it can corrode the internal parts of your toilet. If you are aiming to remove tough stains from the tank, I also recommend white vinegar diluted with water."
Green or brown stains in the toilet usually indicate lime buildup. Lime scale forms as hard water evaporates and leaves a mineral buildup behind. As it dries, it picks up any dirt particles along with it, and slowly the stain builds, layer by layer, on the inside of the toilet bowl.
To remove limescale from the bottom of your toilet you will want to pour vinegar into your toilet bowl and leave that on there for three to four hours. After the vinegar sits, you can scrub those stains with either a toilet brush or a wet pumice stone and flush the toilet.
Because water deposits build up under a toilet's rim, it can take only 24-48 hours for colonies to start breeding. As it grows, you will see what looks like black debris or rings inside the bowl. This can cause respiratory problems for people as the mold and mildew release tiny spores into the air.