In this scenario, squeezing liquid hand soap, body wash, or shampoo into the toilet should net you the same results. STEP 2: Let the soap sit for about 20 minute so it can coat and loosen the clog for maximum flushability.
As it turns out, you can actually unclog a toilet with dish soap instead of turning to a harsh, toxic bowl cleaner. Just as natural dish soap helps break down dirt, grease, and food that may be stuck on dishes and utensils, it can help break down what's in your toilet bowl.
Make your own drain cleaner by pouring one cup of baking soda and two cups of vinegar into the toilet and adding a half gallon of hot water. Dish soap can also help loosen some obstructions. When using either method, allow the solution to sit overnight and then flush the toilet to see if the obstruction has cleared.
Caustic Soda
Caustic soda is a nasty chemical that can burn, but it's very effective for unclogging toilets. To use this chemical, you need to get some rubber gloves and eye protection. You can pick up the chemical from the local hardware or grocery stores.
If you can't unclog the toilet using a plunger or a snake, your next best option is to use boiling water. Boiling water can help to dissolve the clog and free up the pipes. To use this method, bring a pot of water to a boil and pour it into the toilet. Let it sit for a few minutes, and then flush the toilet.
You might want to see if the clog works itself out in time. If you have another toilet you can use, let the clogged one set overnight. The water pressure that builds up in the bowl might actually cause the toilet to unclog itself. After a day's wait, flush the toilet again.
A clog is the most common reason for a toilet that doesn't flush. Clogs can range in severity, from a complete blockage to a partial obstruction. Wipes, toilet paper and other items can build up in sewer lines, which could result in slow flushing that doesn't completely clear the bowl.
If you have a toilet that doesn't fully flush, common causes include a clog in the trap, a worn-out flapper, blocked rim jets, a faulty float, or an issue with the handle and chain.
According to Abrams, an ordinary bar of soap placed inside a mask, a net, or any other porous material should be a perfectly safe way to keep a toilet bowl clean when you flush it.
While you can use a regular drain snake in a toilet, a closet auger, or toilet auger, is a type of drain snake specifically designed for use in a toilet. Its unique design and protective rubber coating allow it to maneuver through the tight S-bend in a toilet without damaging the porcelain.
Some toilets have a dual-flush feature – two different buttons releasing a different quantity of water – but no matter the type of toilet, its design uses water, and help from pressure and gravity, to push any waste in the bowl down into the toilet trap. It's an entire process that typically takes about 15 seconds.
Using chemical drain cleaners (like Drano)
Most chemical drain cleaners clear your drain by breaking down the clog with a chemical reaction. The heat created by the chemical reaction can cause the porcelain in your throne to crack. And then you might need a whole new toilet… all because of some Drano.
A Clogged or Blocked Drain
Spotting a blocked drain is a fairly easy task. Water will overflow from the toilet's bowl rather than the tank, causing a huge mess. In order to stop the overflow, you must treat the clog. For simple clogs, a plunger and some elbow grease will usually do the trick.
Start by slowly and firmly pushing down to create a seal and then pulling up sharply to dislodge the obstruction. When you pick up the pace, you will notice the water starting to drain. It usually takes at least 15 minutes to unclog a toilet. When draining, some water may dislodge and push forward the blockage.
Pour Hot Water into the Toilet
If you need to heat some in the microwave or the stovetop, you don't want it to reach boiling temperatures. Boiling water can cause toilet porcelain to crack. Allow the hot fluid to sit in the toilet for a few minutes to loosen the clog.
Aside from vinegar and baking soda mixture, applying bleach is one of the easiest and cheapest methods for unclogging a blocked toilet.
Slowly pour in 1 cup of vinegar (white or apple cider) and the solution will begin to fizz. Let sit for 20 minutes, then flush down the toilet.. Check that the toilet is once again draining normally. If the toilet is still not draining, you can repeat this process a few more times, or let the solution sit overnight.
Normally, a bar of soap is not big enough to clog up the sewage PVC pipe which is usually 2″ in diameter, a bar of soap could be very slippery, it won't clog up or plug up the toilet, will be dissolved in a day or two if it is accidentally flushed down the toilet. Don't worry about it.
Solid soaps like the classic, old-fashioned bar soap tend to cause clogs faster than liquid soaps. All soap can accumulate on the walls of pipes over time (especially if you don't have a water softener).
Most of the time liquid soaps like shower gel and shampoo aren't a problem. It might seem like a chore at first, but cleaning hair out of the shower drain every time you use it can help you avoid serious clogs.