Gold jewelry can be cleaned with dish soap, ammonia glass cleaner, or even just hot water. As with silver, you can give it a good scrub when necessary, but be sure to use a soft toothbrush or other small brush designed specifically for jewelry.
Cleaning gold-plated and white gold jewellery
Gold-plated jewellery can be cleaned with a mild dish soap soak, but should not be scrubbed or rubbed with anything abrasive. All colours of gold, including rose gold and white gold, can be cleaned the same way.
The Right Way to Clean Gold
Mix warm water with a few drops of Dawn Dish Soap. (You can use other types of soap, but just make sure there are no phosphates in the ingredients!) Let your gold jewelry soak for a few minutes. Remove from the liquid and gently brush your jewelry with a soft toothbrush.
Dawn dish soap is safe and effective at cleaning jewelry. Just add a few drops to a warm basin of water and let your jewelry soak for 15-30 minutes. Then remove it from the basin and gently brush with a clean, soft-bristled toothbrush to get grime out of the grooves.
Jewelers use ultrasonic cleaners with high frequency sound waves and chemicals, which create bubbles that latch on to the dirt on the diamond. The high frequency sound waves pull the dirt away from the stone and bring them up to the surface.
Dish Detergent & Warm Water
The best homemade jewelry cleaning solution is a mixture of a few drops of Dawn dish detergent in warm, not hot, water. Let the piece sit in the solution for a few minutes, longer if it's very dirty, then gently scrub with a new, baby-size, soft toothbrush.
Remove any white gold jewellery before you carry out dirty or hands-on tasks. Don't swim while wearing white gold as the chemicals in the water (chlorine) can react with the plating. Remove white gold items when bathing and sleeping. Keep your white gold away from other metals.
How Do I Fix It? Since the “yellowing” is just the rhodium plating wearing away, the simple way to fix it is to get the rhodium replaced. Take your white gold to the store you purchased it, and they will place a thin coat of rhodium over the gold, returning it to the shiny white color you had originally.
For all types of gold jewelry, we recommend Connoisseurs Dazzle Drops Advanced Jewelry Cleaner. With this non-toxic cleanser, you can utilize a fresh solution every time you clean for the most effective results. You can also try Connoisseurs Fine Jewelry Cleaner in the familiar red jar.
Does Coke Clean Gold? This is a handy and maybe unexpected tip, but Coke does indeed clean gold. You can dip your gold in a small bowl of Coke and make sure that it is completely covered. Leave the gold plated jewelry in the solution for 10 minutes and then rub with a soft cloth and rinse.
Never use toothpaste, baking soda, or a commercial metal cleaner on gold. If you use these abrasives, you may scratch the gold. Never use bleach.
Gold jewelry can be cleaned with dish soap, ammonia glass cleaner, or even just hot water. As with silver, you can give it a good scrub when necessary, but be sure to use a soft toothbrush or other small brush designed specifically for jewelry.
The short answer is no. Toothpaste is not a good option for cleaning your ring. Toothpaste contains scrubbing particles to polish your teeth, but these particles are often harder than the metals in your ring, especially gold or white gold. Using toothpaste on your jewelry could cause scratches or pitting in the metal.
Baking soda is an excellent DIY cleaner perfect for cleaning precious metals like gold, silver, and gold-plated and silver-plated jewelry. You can even use it on costume jewelry to keep your jewelry pieces shiny.
Cleaning your gold and gemstone jewelry couldn't be easier with white vinegar. Simply drop the jewelry into a jar of vinegar and let sit for 10 to15 minutes, agitating occasionally. Remove and scrub with a soft-bristled toothbrush, if necessary.
When you see a yellowish tint in your white gold jewelry, it's not because of poor quality. Instead, you see the inner layer of gold alloy under the rhodium plating. Because rhodium is applied in such a thin layer, usually only a few microns thick, it can wear off over time.
When you see a yellow sheen on your white gold jewelry, it is not the result of oxidation or another chemical reaction, meaning the metal does not actually change color. The outer layer of rhodium slowly wears away over time, eventually revealing the creamy-yellow color of un-plated white gold.
When the rhodium plating is removed, the piece of gold loses its color and surface and becomes cloudy. It is good to know that the durability of rhodium plating depends on its thickness.
Soap – Steer clear of any soap with unknown ingredients. Basic blue Dawn dish soap is fine, but remove your gold jewelry before showering to avoid accumulating a film from other body washes. Chlorine – Chlorine, especially at high temperatures like in a hot tub, can permanently damage or discolor your gold jewelry.
Wearing A White Gold Ring in the Shower
There's nothing wrong with getting white gold wet, so the water running in your shower will not damage your white gold ring. However, it's still strongly recommended that you take the ring off prior to showering.
There is no price value difference between the actual gold in white and yellow gold jewellery, as long as it is hallmarked at the same carat weight.
Another great way to clean your sterling silver jewelry is with Windex. Yes… Windex. You can either spray the Windex directly on the item to be cleaned or on a soft-bristled toothbrush or soft cloth.
It is a common myth that toothpaste is a good way to clean your jewellery. This is actually false. Toothpaste can damage your diamonds, gemstones, gold and silver. Toothpaste is abrasive and has a hardness of around 3/4 on the Mohs Scale of Hardness.
Use dish soap and warm water for most metals, gems, and crystals. “Most jewelry, whether it's a diamond or rose quartz, can be safely cleaned with dish soap and warm water,” said McKenzie Santimer, museum manager and designer at the Gemological Institute of America.