The bubbling reaction from the baking soda and vinegar helps to loosen the drain clog, and the boiling water in step 4 helps remove it from your pipes. Baking soda and vinegar can serve as a natural solution to unclog and clean a stinky drain.
While the baking soda and vinegar solution is effective in breaking down a clog, it will also cause your drain to become more damaged. The baking soda's abrasive nature will wear down your drain over time. This is why you should avoid using baking soda and vinegar solution for cleaning out your drain.
If the baking soda and vinegar method doesn't unclog the drain, use the salt and baking soda method next. This works best if you do it right before bedtime since the drain won't be used until morning.
A monthly cleaning will allow you to use safe cleaning methods which will save you time, energy and money in the long term. Combine 1 cup of vinegar, 1 cup of very hot water, and 1 half cup of baking soda and pour the mixture down the drain.
Or you can pour one cup of vinegar down the drain and let it sit for 30 minutes, followed by a rinse with two quarts of very hot water.
Vinegar. Vinegar is both safe and beneficial to pour down your drain. It acts as a natural cleaning solution and can remove blockages and harmful bacteria that cause foul odors.
Although mixing vinegar and baking soda is not considered dangerous, you should still avoid mixing these in a container. Vinegar is acidic and basic soda is basic, so the by-products are sodium acetate, carbon dioxide, and water that are not toxic.
Baking soda powder will turn into a cement like mass and completely clog everything it settles in. I had a family member dump about three cups down the kitchen sink this summer and I ended up having to replace the trap, tailpiece and dishwasher drain inflow.
Pouring boiling water is quite risky as it might lead to a steam burn or scalding. Another thing to keep in mind is what type of material you are pouring in into. If you have a porcelain sink, it is likely to crack due to the heat. All in all, pouring boiling water down your drain will only cause issues down the road.
The "creepy black stuff" in your drain is made up of a combination of things, mostly decomposing hair, soap scum, toothpaste grit, shaving cream residue, skin cells, etc.
If a kitchen or bathroom sink drain still smells after removing trapped hair and using the baking soda and vinegar, there may be something caught in the p-trap that's causing the odor.
If your drain is clogged with hair, baking soda can dissolve hair in a drain. To try this safe and easy method at home - first, pour a cup of baking soda down the drain. Then pour a cup of vinegar (white vinegar) down. Allow the mixture to sit for several minutes.
You should use a ratio of 1:2 baking soda to vinegar. In other words, if you're using ½ cup of baking soda, use 1 cup of vinegar, or if you're using a cup of baking soda, use 2 cups of vinegar.
Drop in 1/2 cup of baking soda down the drain. Pour in 1 cup of vinegar, cover the drain with a plug and let sit for 10 minutes – you will hear fizzing. Rinse with more hot water.
Another option for dissolving hair in a drain is to use a mixture of baking soda and vinegar. This mixture will create a chemical reaction that will break down the hair. Mix equal parts baking soda and vinegar and pour it down the drain to use this method.
Coke and Pepsi are loaded with phosphoric acid, which breaks down the buildup that can clog your drains! Phosphoric acid can even remove lime scale and another tough buildup that regular cleaners struggle with.
We recommend you add a cup of baking soda to your blocked toilet and wait for some minutes. Next, pour two cups of vinegar slowly into the toilet. Vinegar and baking soda will typically react to form bubbles, so ensure you pour carefully and slowly to prevent the toilet water from overflowing or splashing.
Pouring boiling water down the drain to unclog it most likely won't work. Sure, there's a very small chance it could loosen the clog, but there's a larger risk of softening or melting PVC joints.
Will Boiling Water Damage PVC Pipes? The general rule of thumb is that hot boiling water can soften or even slightly melt the joints in your PVC pipes so YES, if you subject these types of pipes to high temperature water on a regular basis - they can be damaged, causing leaks and eventually requiring replacement.
Leave it in the drain for an hour or two or overnight, and then flush the drain with hot tap water. For larger drains, such as tubs and kitchen sinks, use about a quarter-cup of baking soda, a half-cup of water to move the powder down, and 2 cups of vinegar.
If you're unable to reach into the drain to remove the clog by pulling it out, baking soda, vinegar, and hot water may do the trick. Simply pour one cup of baking soda followed by one cup of vinegar down the drain. Give it a few minutes to fizz (at least five, preferably longer), then rinse the drain with hot water.
Spray full-strength vinegar on first and let it sit for a few minutes. Wipe the area with a nonabrasive cloth or sponge. If any stains remain, sprinkle baking soda on a damp sponge and scrub. Then wipe with a clean wet cloth to rinse.
Pour baking soda into the drain (about half a cup), followed by one cup of white vinegar. Cover the drain and let it sit for 30 minutes. After waiting, boil a kettle of water and dump all of the boiling water down the drain to flush out the loosened clog.