For example, the cartridge may not be inserted properly into your machine, or you may have excess dirt or ink on one of the cartridges which could prevent the printer from being able to read it effectively. Additionally, the error messages could appear if you're trying to use a remanufactured cartridge.
If your printer's status displays "Printer in error state," there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn't open and the paper isn't jammed.
Ink may have run out (The lamp on the ink tank flashes). If printing is in progress, you are recommended to stop printing, replace the ink tank, and then print again.
E, 1, 6 (LED display) The ink has run out. Replace the ink cartridge and close the paper output cover.
The yellow triangle on the printer is the alarm lamp of the printer; if it is lit, it indicates that there is an item that needs to be addressed on the printer.
Performing a Reset All stops printing, clears the printer memory, and restores the printer settings to their default values.
Are you wondering why my printer is showing orange light? It indicates firmware issues, paper jams, or improperly installed cartridges. Resolve it by performing a power reset of your printer.
Number of flashes = 22 flashes / Support Code = 2102
The printer has detected that the paper has been fed aligned to one side. Load the paper into the center of the front tray, then align the paper guides with the edges of the paper. Press the printer's Start button.
The Power light blinks at a steady interval when the printer is processing a print job. If the Power light blinks fast, the ink cartridge door might be open, or the printer might be in an error state. If an error message displays on the computer screen, follow the on-screen messages to resolve the issue.
Some of the most common printer problems that most of us have experienced include paper jamming, slow printing, uneven printing, and wrong colour output. If you use your printer frequently, we know how annoying it can be to have persisting problems with the printer.
Issues with the driver: When an exclamation mark appears for a printer in the Device Manager, it's most likely due to a corrupt driver. Antivirus conflicting with the printer: In some cases, users reported that their third-party antivirus conflicted with the printer software or driver, triggering the warning sign.
If you've recently refilled the ink in a cartridge, it may be defective and need to be replaced. The new ink cartridge may be defective or damaged. For instance, it may have a bad printer header or a blocked ink nozzle. Return the cartridge and get a new one to see if the replacement works better.
Check Paper Tray and Printer Connection
Many printer models won't print if there's a loose USB connection or if they're out of ink or paper. Verify your printer's ink levels, clean the printhead, fill the paper tray, and avoid using substandard paper.
Power down the printer and then unplug the power cord from the printer and the wall. Wait for a minute, then plug the printer back in. The printer will reset and turn on. Wait for the cartridges to center, and then try printing again.
Select Start , then select Settings > Devices > Printers & scanners . Under Printers & scanners, find the printer, select it, and then select Remove device. After removing your printer, add it back by selecting Add a printer or scanner.
Place the printer near the network router. Make sure paper is loaded in the main tray, and then turn on the printer. From the Wireless or Setup menu, select Network setup or Settings, and then select Restore Network Settings.