Open your networks panel from your taskbar (click the WiFi icon in the bottom right). Click on “Properties” of your WiFi network. In the new window that opens, scroll all the way down to “Properties”. “Network Band” will either say 2.4GHz or 5GHz.
Method 2: Using Android
Go to Settings > Network & internet > WiFi > Select the network properties (tap the gear icon or menu icon). NOTE: Depending on your android version these steps might be different. 3. Read the frequency setting.
Check the name of the Wi-Fi network you're connected to.
Tap and hold the Wi-Fi icon in the top-left corner. The name of your Wi-Fi access point appears below "Wi-Fi" on the left side of the panel. If you see either "2.4GHz" or "5GHz" here, you'll know that you're connected on that frequency.
Logging into your router configuration page:
Your router has a configuration page where the user can change and alter settings, wifi name and password. You can also log in and set up a dedicated 2,4GHz network to differentiate this from the 5GHz. You can also set your own name and password for each band.
The downside is that if you join the 5GHz network, and then move away from the base station, you'll remain connected to the 5GHz network and get spotty performance at distances that 2.4GHz handles just fine. For most people, the best choice is to set up a network that does both 2.4GHz and 5GHz as a single network.
The 2.4GHz band uses longer waves, which makes it better suited for longer ranges or transmission through walls and other solid objects. Ideally, you should use the 2.4GHz band to connect devices for low bandwidth activities like browsing the Internet.
Go to Settings > Cellular, then turn Cellular Data on or off for any app (such as Maps) or service (such as Wi-Fi Assist) that can use cellular data. If a setting is off, iPhone uses only Wi-Fi for that service.
Ideally, the 2.4GHz band should be used to connect devices for low bandwidth activities like browsing the Internet. On the other hand, 5GHz is the best option for high-bandwidth devices or activities like gaming and streaming HDTV.
2.4 GHz vs. 5 GHz: Which frequency should you choose? A 2.4 GHz connection travels farther at lower speeds, while 5 GHz frequencies provide faster speeds at shorter range. Your choice of 2.4 GHz or 5 GHz will depend on where and how you use your WiFi connection most.
A dual band router doesn't switch frequencies, it broadcasts on two frequencies simultaneously. 2.4 GHz has longer range and greater penetration of obstructions. 5 GHz offers higher speeds.
Select Wi-Fi. For Telstra Smart Modem 1.1 and Gen 2: You'll see Guest tabs for both the 2.4GHz and 5Ghz. For each tab, tick the Enabled option if you want that network to be available. You can also configure your own network name and password, or take note of the name and password generated.
Ensure that Your router Firmware is updated
The problem might also come from this reason if your router Firmware is not updated. In routers, manufacturers have the option of releasing updates for the device. So, download and install new updates to avoid any errors.
You can connect to the 5GHz when you're in your main work/recreation space, then switch to the 2.4GHz when you wander a few rooms away. If your devices seem to connect to the 2.4GHz network by default, or if you just really care about optimizing your speed, separate SSIDs are the way to go.
Not really. The bands don't overlap and 5GHz has shorter range. One reason you might want to do it is if 2.4 is crowded with other people but you have 5GHz to yourself.
Your band is identified by the number in the upper-left corner of your screen. This band corresponds to a frequency, which determines your network speed. Different phones support different bands, so a phone might not receive the same connection as other phones in the same location.