Scrub Out Stains Choose a stone on a stick, so your hands don't have to get too close to the toilet bowl. A few swipes with the pumice stone should do the trick. Don't worry: As the pumice is a softer stone, it won't scratch the porcelain surface. Turn the toilet's water back on, then flush to rinse the bowl.
Pumice can polish toilet bowls. Its tiny particles can remove hard water rings. It gradually wears down during use. Three pumice stones will quickly refresh your toilet within a few minutes.
To use a pumice stone: Wet your skin. If you're removing hard skin on your heels, a callus, or a wart, soak the area for 5 to 10 minutes first to soften it. Wet the pumice and rub it against your skin using light, short strokes without causing pain.
Don't ever use it on a fiberglass or acrylic bathtubs.
Pumice stones work like magic to clean hard water stains on porcelain tubs, but they'll scratch fiberglass tubs permanently. If you're not sure which type of tub you have, hold a magnet to the side.
Without regular cleaning, some of that dead skin could get trapped in the pumice stone cracks and crevices. Bacteria could form, especially if the stone is kept in a damp and warm bathroom environment. Your pumice could stop working so well, and become a breeding ground for nasties!
Pumice stones are one of the most popular methods for getting rid of calluses. For the best results, soak your feet in warm water for 15-20 minutes before gently buffing the callused area with your pumice stone. Be careful not to overdo it, as this can irritate your skin and cause soreness.
Soak your foot or other affected area in warm, soapy water for 5 minutes or until the skin softens. Wet the pumice stone. Rub the pumice stone on the wet callus or corn with light to medium pressure for 2 to 3 minutes. This will remove dead skin.
Pumice stones are another simple, popular cleaning tool, as are steel wool pads. Unfortunately, it is generally unwise to use pumice or steel wool on porcelain fixtures: while it may get rid of stains, it will also scratch the finish. This creates areas for stains and bacteria to adhere directly to the porcelain.
Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight. The next day, scrub and flush. What's good for those caked-on pots and pans after cooking dinner is also good for removing a brown stain on the bottom of the toilet bowl.
A type of volcanic rock, a pumice stone is a lightweight yet effective tool for removing stains on hard-to-remove stones—without scratching them. This pumice stone is 20 percent denser than similar models to really slough away stuck-on stains found on your toilet bowl, shower, sink, wall tiles, grill, and more.
Urine scale and lime: The cause of staining
Urine scale is a mineral compound created by chemical processes: The lime contained in the water used to flush the toilet reacts with substances in urine.
The experts we talked to recommended any cleaner with some form of bleach, but you can find plenty of bleach alternatives, as well. I personally use Lysol Hydrogen Peroxide Toilet Bowl Cleaner. A bucket: To ensure that the entire bowl gets clean, you need to reduce the water level before applying the cleaner.
As a one-stop cleaning solution, pour one cup of bleach around the bowl. Then tackle every inch with a toilet brush or a handheld scrub brush. Let it sit for five minutes, then flush.
Add 1/2 cup vinegar to the toilet bowl, let stand a few minutes, brush, and flush. If you have hard water, let the vinegar sit for an hour, and you may have to do some light scrubbing. To remove stains, add 1/2 cup borax to the water, swish it around, and let it soak overnight.
Vinegar and baking soda produce that oh-so-familiar chemical reaction that powers through buildup and loosens tough stains. While it might seem like it's chewing its way through grime, it's not powerful enough to damage the porcelain finish of the toilet bowl.
CLR Septic System Treatment is safe on pipes and porcelain and works on fats, oils, grease and other stubborn organic matter.
Over time, porcelain toilets can develop stains. It may be tempting to use bleach, hydrogen peroxide, and the like, but it's best to avoid these cleaning agents as much as possible. It's not likely that the chemical compounds above will crack your porcelain toilet, but they can damage the finish of the porcelain.
Risks and Side Effects
Exfoliating with a pumice stone may cause skin irritations, especially to sensitive areas. It may also cause small abrasions if it's not done gently. It's best to start with less sensitive areas, like the heels of your feet.
To activate your pumice, simply soak it in a nutrient solution such as compost tea for at least 24 hours before mixing it into your garden soil.
“Pumice stones are very porous and, after using, can accumulate your dead skin cells in [its] pores. Thus, it is important to wash and rinse your stone after you use it,” Dr. Laureano explains. Then, apply your favorite body lotion or foot cream to lock in the smoothness longer.
Pumice has a porosity of 64–85% by volume and it floats on water, possibly for years, until it eventually becomes waterlogged and sinks.
Pumice stones are naturally formed rocks originating from volcanoes. They have been used in construction and manufacturing since Roman times but also in household cleaners and personal hygiene. Pumice stones are abrasive, but also soft and hygienic, making it perfect for use on the body.