Mix hydrogen peroxide and baking soda in a bowl to form a thick paste. Spread the paste onto your grout using an old toothbrush to completely coat the area to be cleaned. Let it soak in for about 5 to 10 minutes. Like the previous method, use a brush with firm bristles to scrub the grout.
Moisture leads to mildew stains, which is the common cause of yellowing grout. To prevent dingy shower grout, run a squeegee over the tile after you're done showering. Opening a window, turning on the exhaust fan while showering, or leaving the door open will also reduce moisture.
For light discolouration, dip a toothbrush into a solution of one-part water to one-part bleach and use it to scrub along the grout. Leave for a few minutes and then rinse with water. For heavier staining, make a stiff paste of bicarbonate of soda and distilled white vinegar.
Grout that hasn't been sealed, needs to be resealed, or is in poor shape should not be cleaned with vinegar. The vinegar penetrates into the pores of the grout, further weakening the material. Over time, vinegar will deteriorate the condition of the grout by etching or wearing it away.
So, how do you clean grout with vinegar and baking soda? Apparently, vinegar is a popular natural household cleaner, but it's too acidic for cleaning grout. In fact, the acetic acid in vinegar can corrode the grout over time, so you might want to avoid using it for cleaning in this case.
Vinegar is perfect for cleaning shower tile and grout! It can dissolve soap scum and hard water stains and work as a mild mold remover and disinfectant!
What do professionals use to clean grout? Whether you believe it or not, most professionals use a solution of white vinegar and water with a 1:1 ratio. This solution is often more effective than dedicated Ph-neutral grout cleaners.
First, wash your tiles and grout with sugar soap using a toothbrush and scrubbing brush. We used Selley's Sugar Soap concentrate for this, mixed with warm water in a bucket – it works a treat. Use your toothbrush, scrubbing brush and some elbow grease to scrub the grout and give it a good going-over.
Did you know that toothpaste makes an effective tile grout cleaner? To remove dirt and grime from tile grout: Dab some white, non-gel toothpaste onto the grout.
Method 2: How to Get Grout White Again with Lemon Juice or White Vinegar. Saturate the grout with lemon juice, a mild disinfectant that gets rid of grout stains naturally. You can also use white vinegar for chemical-free grout cleaning.
Myth: Bleach is great for deep cleaning tile and grout.
But frequent use of bleach can eventually weaken the grout's structure, causing it to become brittle and deteriorate.
One mum demonstrated her method in a TikTok video, which shows her covering grubby grout in $6 Gumption before using an electric toothbrush to buff away dirt instead of scrubbing the lines by hand. She then used a pressure sprayer to blast away grime.
TL;DR: Combine baking soda & white vinegar to create the perfect cleaning solution for tile grout. Scrub with a toothbrush and voila! For floor tiles, combine baking soda and hydrogen peroxide, apply paste, let sit, then scrub away and rinse off with warm water. Grout gets dirty and unsightly – quick!
The secret of the blue dawn solution is the effect of cutting grease and grime. Blue Dawn dish soap is the best multi-purpose grout cleaner you can effectively use in your home.
Mix together ½ cup baking soda, ¼ cup hydrogen peroxide, 1 tsp dish soap. Spoon cleaning agents onto grout and let sit for 5-10 minutes. Scrub the grout lines with a brush. Grout cleaning tip: Make sure to scrub hard to agitate the grout and cleaning solution and break up any really stuck dirt.
Do not use vinegar or baking soda to clean tile grout. Alkaline cleaners are a better choice than vinegar or baking soda because grout contains cementitious mortar that can be dissolved by acidic cleaners, including vinegar. Vinegar and other acids are also a bad idea for stone tile because the acid can etch the stone.
One way to clean grout without scrubbing is by mixing hydrogen peroxide and baking soda. Add 1/2 cup of baking soda to 1/4 cup hydrogen peroxide and mix into a paste. Follow with a teaspoon of dish soap. Apply the mixture to your floor grout and let it sit for 5–10 minutes.
Causes of How Grout Turns Yellow
Hard water exposure is one of the main reasons why grout turns yellow. Constant exposure to minerals such as calcium, magnesium, and iron causes discoloration. A practical solution for this problem is to use water softeners to reduce the mineral content.
Baking soda is a safe deodorizer, whitener, and household cleaner—and it's an effective natural grout cleaner. Because baking soda is also a mild abrasive, using it for cleaning grout lines gives you extra firepower without the risk of scratching your tile.
Make a baking soda paste with water and spread over tile and grout. Leave on overnight and spray with vinegar in the morning. Follow with your regular morning shower and rinse off any baking soda/vinegar residue. No scrubbing needed!
Vinegar can indeed ruin grout.
The grout will eventually wear off. So you should take not to apply vinegar for cleaning purposes if you have unsealed grout in the area.