Use Acetone or Nail Polish Remover Use an eyedropper and add a single drop of acetone or remover to the nail polish. Swirl the polish to ensure it mixes through and then check the consistency. Add another drop if needed and mix again.
"Add a tiny bit of baking flour to polish that has become thin or watery," says Hipp. "Start with very little and make sure you shake the bottle well." Easy does it: A little goes a long way. "If you add too much, you risk your nail polish becoming a chunky mess," says Hipp.
“For a creamy, marshmallow look, opt for a soft white polish and a creamier white color. When the two interact, it will give that creamy, milky look. (You can also use baby pink.) Start with one coat of the solid and add two coats of a semi-sheer polish," she explains.
By far the most common cause of yellowing is excessive sun exposure. It's easy to forget just how powerful the sun can be, especially in summer. Even the finest gels and dip powders will only tolerate a certain amount of direct exposure.
Pure acetone at your rescue
All you need is just a single drop of pure acetone to thin out your polish. The key is to use just one drop because any more than that will break down the nail polish and lessen its lifespan. So, be very careful with the amount of acetone you use to fix your thick and clumpy polish.
White nail polish can last for years, so long as the bottle is tightly sealed. However, according to Julie Kandalec, a NYC-based celebrity manicurist, white nail polish formulas will thicken most quickly due to their chemical makeup. But, there are some ways to combat this thickening to get more out of your polish.
When applying white nail polish, apply more polish on the brush and use fewer strokes. “I use this technique to 'float' the polish down the nail rather than press,” says Remark. “If you use a lighter touch, the brush bristles tend to leave behind fewer streaks.”
Acetone, found in most nail polish removers, is a solvent. If you add it to your old nail polish it will thin it out, it's true.
Hand sanitizer
The good news is that most sanitizers contain a little bit of alcohol, which is a good solvent to soften nail polish.
How to dilute thick gel polish: remover. A special liquid for removing varnish (but not simple, but gel) will help to dilute the thickened gel polish to an acceptable state. The wash will dilute the gel polish, but, as in the case of using alcohol, it will not stay on the nails for too long, it will begin to roll.
If you store the product near a window or around a light source, it's possible that it can harden inside the bottle over time. The first time you open your bottle of LMM gel, you will find that it's very thick (compared to regular nail polish). This is perfectly normal.
Water, In General
That swelling breaks the bond between the polish and the nail. This doesn't happen the same way with gel polish, which repels water, according to Schoon. The only places where the nail comes in contact with water are the areas between your polish and your cuticles, and the underside of your nails.
White is also seen as a color that represents a blank slate, or a fresh start. This can make it an empowering choice for someone who has just graduated high school or college, started a new job, or moved to a new city or country. Of course, the 'blank slate' could also link back to the viral trend.
Extreme UV Light Exposure Whilst Drying
If gel nails are left under a UV light for too long, or for too short of a time, they can cause your white nail polish to turn brown. Additionally, too long under the UV light can also lead to bubbly nail polish.
Classic white nails are a staple all year round, but even the classics can be elevated. So, if you're looking for a simple way to spice up this timeless nail look, opt for white shimmer nails. If it sounds simple, that's because it is. Simply throw on a glitter finish and you've instantly got new nail art.
Frequently Asked Questions. Can you use rubbing alcohol to thin out nail polish? Yes, you can use 2 to 3 drops of rubbing alcohol (91% alcohol) to thin out your nail polish.
If the gel polish has been applied too thick, it makes it difficult for your UV lamp to fully penetrate the colour and thus cannot effectively cure the polish in all of its layers. This results in a top layer of gel polish that appears wrinkled, bubbled, or lumpy.
Shake your polish well before application to ensure that the formula is properly mixed. Then, start on your color. Apply each layer in a thin coat all the way to the edges of the nail, being mindful not to stray onto the skin.
If you find your gel is not curing, you may have applied the gel too thick. Cure for longer if this is the case. It can also be the case that your lamp isn't functioning properly. Turn it upside down to check that the bulbs are working, and if you have a very old Nail Lamp, it may be time to replace it.
"Gel manicures could last up to two weeks with proper nail prep and at-home care, such as cuticle oil and hand lotion," says Duguay-Gordon. And if you're careful, they can last up to four weeks.
Exposure to Chemicals
The first thing that popped into your head was likely cleaning supplies. And yes, gel polish can react to the chemicals in cleaning supplies. But there are less obvious chemicals that can affect your gel nails too. Makeup and skincare products can stain and discolor your nails as well.