To dry iPhone, tap it gently against your hand with the Lightning connector facing down to remove excess liquid. Leave the device in a dry area with sufficient airflow. Placing the device in front of a fan blowing cool air directly into the Lightning connector may help the drying process.
This is true for any iPhone model: your best chance to fix a wet iPhone is to follow the steps above and then leave the phone on a towel to dry by itself for 24-48 hours. Don't charge it, don't turn it on, don't use rice or anything else. You can open a window and let your phone air out.
Both manufacturers also say if you drop your phone in a liquid other than clean water -- like soda or pool water -- you should quickly rinse your phone using tap water before drying with a towel and then air drying. Apple and Samsung say to never use a heating source, like a blow dryer or oven, to dry your phone off.
If your iPhone has been exposed to liquid, unplug all cables and do not charge your device until it's completely dry. Using accessories or charging when wet might damage your iPhone. Allow at least 5 hours before charging with a Lightning cable or connecting a Lightning accessory.
Put it in rice.
Re-insert the SIM card, put the device in the bag, and fill most of the bag with uncooked rice. Leave it in the bag for a couple of days. The rice should draw the moisture out of the device. Many a wet iPhone has been saved this way.
Do not -- we repeat, do not -- use a blow dryer; the heat can damage the phone. If you have a phone or a gadget with a cover that comes off, take it off, and take out the battery, the SIM card, and anything else that can easily be removed. Dry all those things off.
GOT a wet iPhone? You've probably heard that it should go straight in a bowl of rice – but that's not true. Putting your iPhone in rice isn't very effective, can damage your mobile, and means you'll miss out on much better drying methods.
If you see the alert again, there's still liquid in the Lightning port or under the pins of your Lightning cable. Leave your iPhone in a dry place with some airflow for up to a day. You can try to charge your iPhone or connect a Lightning accessory throughout this period. It may take up to 24 hours to dry fully.
To get moisture out of the iPhone's interior, you need a desiccant. Many people swear by uncooked rice, advising owners to put their damp iPad or iPhone in a big bowl of the stuff (cover it completely) and leave it there for 48 hours or so.
Leave your phone in an airtight container full of silica gel packets (those small packets you get inside new shoes and bags), or another drying agent. These help absorb the moisture.
If your iPhone won't turn on after coming into contact with water, it can be one of two things; either the iPhone has short-circuited, or the water has damaged or corroded some internal components and compromised the circuit. Both can be irreversible if the phone isn't looked at by an iSmash technician.
Dry it with a towel
Position your phone so that the charging port is facing downward, with a cloth or paper towel underneath to collect draining water—this is how to get water out of your phone speaker. Air circulation is crucial for a fast drying process, so you'll want to place your phone close to a fan.
The phone should be kept on a dry towel rather than bare ground to avoid further damage. However, the sensitive parts of the phone can overheat if left in the sun for long. So do not keep it in the sun for longer than 20 minutes.
You can take your new phone to the pool. Gone are the days of instant death to your phone if it was dropped in water. The new iPhone 14 can withstand about 19 feet for up to 30 minutes underwater which means in the event that you do drop your phone in the water, you can jump in and save it.
Bury the device in rice or in an air tight container
They have the ability to absorb moisture better than rice. Wait for at least 48 hours to let the device dry out completely and then try turning it on. If the damage is minimal, your device should start functioning again, or at least boot.
So, it's an all bad idea to charge a phone while it's still wet. If you have already tried charging your wet phone, check its IP rating. IP Ratings of Android and iPhones: IP rating or 'Ingress Protection' measures protection from water and dust particles. It consists of two digits like IP68, IP66, IPX8, etc.
It might work in a pinch, but that method can cause some problems. While rice is absorbent, it's incapable of collecting all the moisture hidden deep within your phone, so it only serves as a partial fix.
Yes it does, especially if you put the phone and the rice into a sealed plastic bag. But while the rice will draw out the moisture, that doesn't necessarily mean your phone will work properly afterwards.
Alternatively, you can put the phone next to an air conditioning vent or dehumidifier. Leave the phone, turned off, for at least 24 to 48 hours. (Some people also swear by rice, but keep the risks of “rice damage” in mind.)
Fill a plastic zip-top bag with silica gel packets and bury the phone in the bag. Leave your phone in the bag for 24–48 hours. After you've allowed your phone to fully dry, switch it on. If it doesn't turn on right away, charge it fully and try again.
Moisture will naturally evaporate within a few hours when you place your phone in an open room with a warm temperature. If you're on a typical warm day, put your phone by the window to catalyze the drying process.
Give it as long as possible to dry out. Ideally you want to allow 48 hours or more, but at least leave it overnight if you can.