For synthetic carpets: Mix ¼ teaspoon of a translucent liquid dishwashing detergent, such as Dawn or Joy, into one cup of lukewarm water. For natural fiber carpets: Mix one teaspoon of translucent liquid dishwashing detergent, such as Dawn or Joy, into 1 cup of lukewarm water.
Vinegar, baking soda, and salt are common household items that can be used as carpet cleaners. Soften a carpet by mixing fabric softener, hot water, clear vinegar, and dishwashing detergent.
~DIY carpet cleaner for machines~ I just made a gallon of this carpet cleaner. Add 1/4 cup vinegar, 4 tbsp dish soap, 4 tbsp softener and 1/4 cup peroxide in a measuring cup. Stir it. Then add it to an almost full gallon of warm water.
The most common solvents used in liquid carpet cleaning products are butyl cellosolve, butyl carbitol, citrus, d-limonene, propylene glycol ether and m-pyrol.
In many cases, using plain water in your carpet cleaning machine is enough to flush out soil and dirt. You can even add a bit of dishwashing detergent to help freshen the carpet. (Dishwashing soap with grease-cutting capabilities can even help remove certain oil-based stains.) Dish cleaners are safe and gentle.
Pour some water and add laundry detergent to it. Mix it well. Power on it and use it similarly to the way you use vacuum cleaners. Note- Don't use too much detergent otherwise it may produce a lot of foam which will be difficult to clean.
Vinegar and baking soda are still the best solutions when it comes to a carpet stain or odours. All you have to do is combine the two substances with warm water and you have a highly effective homemade remedy for carpet cleaning.
In a spray bottle, mix one cup of distilled water, one cup of distilled white vinegar, and one teaspoon of dishwashing liquid. Shake well to mix and label the bottle.
TLDR: Baking soda can be used to clean carpet because it is a powerful alkaline solution that when combined with acid produces dioxide gases. These oxidized gases are highly effective at removing stains from carpet and other materials with ease.
You can use 70% Strength Isopropyl Alcohol mixed with water as a good disinfectant cleaner. Mix the alcohol with hot tap water at a ratio of 30% to 50% alcohol to water. Alcohol can be pretty good at breaking down oily stains.
Mix 1 teaspoon mild dishwashing detergent in 1 cup warm water, dip a sponge in the liquid and dab at the stain, moving from the outside toward the middle. Do not overwet. Rinse with fresh water and dry with towels.
Mix dishwashing liquid and hydrogen peroxide and pour on the stain. Let the mixture sit for a few minutes, then blot dry. Repeat until the stain lifts.
The short answer is that you should not use vinegar for carpet cleaning. There is truth to the idea you can use vinegar as a natural disinfectant for cleaning but it cannot remove dirt or soil from a surface or from carpet.
Carpet cleaners are specifically formulated to remove stains, maintain the appearance, and prolong carpet life, while laundry detergents, being multipurpose and cost-effective, may be less effective on certain stains and can leave residue on carpets.
Carpet Cleaner Compatibility
You can use most carpet shampoos in any type of carpet cleaning machine. However, some solutions may have specific requirements, such as an upright or water-based machine.
To make the carpet softer, you can add half cup of fabric softener.
Luckily, with a little elbow grease, a few household items, and just a few hours of your time, you can get those laundry detergent stains out of the carpet. There are actually a few different methods to help you remove liquid laundry detergent stains from your carpet.
A recent report in The Telegraph newspaper suggested that washing up liquid beats most carpet cleaners. While that may be true for a small minority of stains, it is not recommended for all. What's more, concentrated washing up liquid can damage a carpet or leave it feeling sticky to the touch.
Cleaning a Heavily Soiled Carpet
Baking soda is an excellent choice for cleaning heavily soiled carpet, as it absorbs mud, grease, and other unsightly residues. To use baking soda over your entire carpet, sprinkle it heavily along the surface and then grind or push it into the fibers using a fresh, dry sponge mop.
It's not unusual for DIY carpet cleaners to need eight or even 10 passes on a carpet before the water runs clear. This is especially true when: It has been a long time since your carpet was last deep-cleaned.