Baking soda and vinegar – put one cup of baking soda into the blocked toilet and wait two minutes. Afterwards, slowly pour two cups of vinegar and wait a few minutes before flushing the toilet. Dish soap and water – put dish soap, then hot water into the toilet.
A partially clogged toilet can sometimes be cleared just by using hot water. The pressure produced by the hot water helps to push material blockages away, while the heat works to dissolve any fat or grease that may also have built up.
Fill a cup of baking soda and another with vinegar. Pour the baking soda into the toilet, then pour the vinegar. When the two compounds mix, the chemical reaction will release air and loosen the clog. Give the mix about half an hour and pour warm water.
The best way is to pour some bleach and washing liquid into the toilet bowl and swirl the plunger for a few minutes in the mixture. Then rinse it by flushing the toilet twice. This will also help move the blockage forward.
Make your own drain cleaner by pouring one cup of baking soda and two cups of vinegar into the toilet and adding a half gallon of hot water. Dish soap can also help loosen some obstructions. When using either method, allow the solution to sit overnight and then flush the toilet to see if the obstruction has cleared.
When a toilet has a clog made of water-soluble materials, it has a chance of slowly dissolving in the water and freeing up the toilet to work properly again. So, clogs that are primarily made of toilet paper can clear themselves.
There is only one Drano® product recommended for use in slow-running toilets: Drano® Max Build-Up Remover. It contains microorganisms that break down organic matter in pipes that can slow water flow. (However, it will not open a completely clogged toilet. For that problem, see How to Unclog a Toilet.)
Sodium bicarbonate or baking soda is a natural product that you might have at home, and it's useful for home maintenance as well as cooking. Baking soda comes in powder and crystal form. To unblock a toilet, mix it with white vinegar and water to start a chemical reaction.
Because of its corrosive nature, Drano can cause toilet bowls to crack, PVC pipes to melt or break and the glue that holds pipes together can be eaten away. If any of these things happen, you're going to be left with an inoperable plumbing system and costly repairs.
Baking soda and vinegar, when mixed together, can form a chemical reaction that looks sort of like an eruption. This chemical reaction can help clear your toilet and any pipe clogs that you might have.
If you can't unclog the toilet using a plunger or a snake, your next best option is to use boiling water. Boiling water can help to dissolve the clog and free up the pipes. To use this method, bring a pot of water to a boil and pour it into the toilet. Let it sit for a few minutes, and then flush the toilet.
Is it okay to leave a clogged toilet overnight? In most cases, you can leave a clogged toilet overnight. However, calling an emergency plumber near you might be warranted if water starts leaking from the pipes. A simple clog likely won't cause this, but an inexperienced homeowner messing with the plumbing could.
Push down gently at first, since the first plunge will push air into the bowl and could splash back. Then pull up sharply to disturb the clog and loosen it. Continue vigorously pushing and pulling until the water begins to drain. It may take 15 to 20 cycles before the toilet unclogs.
Hydrochloric acid, also known as muriatic acid, is a strong acid that is commonly used to dissolve clogs in drains. This acid works by breaking down organic materials such as hair, grease, and soap scum that can accumulate in pipes and cause blockages.
Coke and Pepsi are loaded with phosphoric acid, which breaks down the buildup that can clog your drains! Phosphoric acid can even remove lime scale and another tough buildup that regular cleaners struggle with. This is an effective and refreshing home remedy if we ever saw one!
Pour one cup of baking soda into the clogged toilet and then slowly pour one cup of vinegar into the bowl. The chemical reaction and fiz can help break down the clog.
Ideally, no more than five or 10 minutes. One plumber told us that if plunging goes on any longer, it's time to try a toilet snake or call an expert.
Clear a Clogged Toilet
A clog is the most common reason for a toilet that doesn't flush. Clogs can range in severity, from a complete blockage to a partial obstruction. Wipes, toilet paper and other items can build up in sewer lines, which could result in slow flushing that doesn't completely clear the bowl.
In some cases, it takes more than one dose of bicarb and vinegar to unclog a toilet. So if your first attempt isn't successful, go back to step one and start over. If a repeat treatment is necessary, leave the mixture for 30 minutes so it can really attack that stubborn clog before you add the hot water.
You can use straight or a diluted vinegar cleaning solution for the bathroom to clean bacteria, especially around the toilet. Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight.
Pour one cup of baking soda into the clogged toilet, and then chase it with the hot water/vinegar mixture. Leave the volcano mix to do its job, checking in about 30 minutes. In most cases the clog will have come apart, and a simple flush with send it all down the drain.
Baking soda is a base and vinegar is an acid; when the two are combined, you get a fizzy chemical reaction that has some properties that can eat away at a clog. However, when you use this combination to unclog a drain, it's just plain ineffective.
Baking soda and vinegar may unclog your drain better than Drano ever could. Start by getting rid of the standing water in your drain. If it will go down slowly, just wait until it's gone. If it isn't moving, use a cup or a spoon to get it out of there.
Combine baking soda with vinegar at a ratio of 1:4 and mix the mixture in 60 gallons of water. As you pour the water down the drain, use the plunger/drain snake. The pressure of water will easily dislodge any debris from the main sewer line.